The Synergy between Static Reservoir Modelling and Flow Simulations for the Optimization of a Field Development Plan of a Carbonate Reservoir, Onshore UAE

2004 ◽  
Author(s):  
M.T. Ribeiro ◽  
S.R. Hassan ◽  
J.S. Gomes ◽  
J.N. Bahamaish
Keyword(s):  
Carbonate Reservoir ◽  
Development Plan ◽  
Reservoir Modelling ◽  
Field Development ◽  
Flow Simulations

Integrated Reservoir Modelling On Heterogeneous Ordovician Sandstone Of IR-Fields, Murzuq Basin Libya, Helps Optimizing Field Development Plan And Reduce Uncertainty

2012 ◽  
Author(s):  
Abel Andres Castro ◽  
Sandrya Laksana ◽  
Muhaned Shaiebi ◽  
Tarek Alkhemri ◽  
Aljilani Almhedwi ◽  
...  
Keyword(s):  
Development Plan ◽  
Reservoir Modelling ◽  
Field Development

60 Years Field Performance Data-Driven Analytics to Generate Updated Waterflood Field Development Plan in a North Kuwait Giant Carbonate Reservoir

2021 ◽  
Author(s):  
Basel AL-Otaibi ◽  
Issa Abu Shiekah ◽  
Manish Kumar Jha ◽  
Gerbert de Bruijn ◽  
Peter Male ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Oil Production ◽  
Horizontal Wells ◽  
Carbonate Reservoir ◽  
Development Plan ◽  
Data Driven ◽  
Water Flooding ◽  
Field Development ◽  
The Impact

Abstract After 40 years of depletion drive, a mature, giant and multi-layer carbonate reservoir is developed through waterflooding. Oil production, sustained through infill drilling and new development patterns, is often associated with increasingly higher water production compared to earlier development phases. A field re-development plan has been established to alleviate the impact of reservoir heterogeneities on oil recovery, driven by the analysis of the historical performance of production and injection of a range of well types. The field is developed through historical opportunistic development concepts utilizing evolving technology trends. Therefore, the field has initially wide spacing vertical waterflooding patterns followed by horizontal wells, subjected to seawater or produced water injection, applying a range of wells placement or completion technologies and different water injection operating strategies. Systematic categorization, grouping and analyzing of a rich data set of wells performance have been complemented and integrated with insights from coarse full field and conceptual sector dynamic modeling activities. This workflow efficiently paved the way to optimize the field development aiming for increased oil recovery and cost saving opportunities. Integrated analysis of evolving historical development decisions revealed and ranked the primary subsurface and operational drivers behind the limited sweep efficiency and increased watercut. This helped mapping the impact of fundamental subsurface attributes from well placement, completion, or water injection strategies. Excellent vertical wells performance during the primary depletion and the early stage of water flooding was slowly outperformed by a more sustainable horizontal well production and injection strategy. This is consistent with a conceptual model in which the reservoir is dominated by extensive high conductive features that contributed in the early life of the field to good oil production before becoming the primary source of premature water breakthrough after a limited fraction of pore volume water was injected. The next level of analysis provided actual field evidence to support informed decisions to optimize the front runner horizontal wells development concept to cover wells length, orientation, vertical placement in the stratigraphy, spacing, pattern strategy and completion design. The findings enabled delivering updated field development plan covering the field life cycle to sustain and increase field oil production through adding ~ 200 additional wells and introducing more structured water flooding patterns in addition to establishing improved wells reservoir management practices. This integrated study manifests the power, efficiency and value from data driven analysis to capture lessons learned from evolving wells and development concepts applied in a complex brown field over six decades. The workflow enabled the delivery of an updated field development plan and production forecasts within a year through utilizing data analytics to compensate for the recognized limitations of subsurface models in addition to providing input to steer the more time-consuming modeling activities.

Integrated Subsurface to Surface Modeling to Assess Reservoir Uncertainty Quantification to A Carbonate Reservoir

2020 ◽  
Author(s):  
A. Chaterine
Keyword(s):  
Uncertainty Quantification ◽  
Gas Production ◽  
Carbonate Reservoir ◽  
Production Volume ◽  
Production Forecast ◽  
Uncertainty Range ◽  
Field Development ◽  
Production Forecasting ◽  
Production Scheme ◽  
Rock Compressibility

This study accommodates subsurface uncertainties analysis and quantifies the effects on surface production volume to propose the optimal future field development. The problem of well productivity is sometimes only viewed from the surface components themselves, where in fact the subsurface component often has a significant effect on these production figures. In order to track the relationship between surface and subsurface, a model that integrates both must be created. The methods covered integrated asset modeling, probability forecasting, uncertainty quantification, sensitivity analysis, and optimization forecast. Subsurface uncertainties examined were : reservoir closure, regional segmentation, fluid contact, and SCAL properties. As the Integrated Asset Modeling is successfully conducted and a matched model is obtained for the gas-producing carbonate reservoir, highlights of the method are the following: 1) Up to ± 75% uncertainty range of reservoir parameters yields various production forecasting scenario using BHP control with the best case obtained is 335 BSCF of gas production and 254.4 MSTB of oil production, 2) SCAL properties and pseudo-faults are the most sensitive subsurface uncertainty that gives major impact to the production scheme, 3) EOS modeling and rock compressibility modeling must be evaluated seriously as those contribute significantly to condensate production and the field’s revenue, and 4) a proposed optimum production scenario for future development of the field with 151.6 BSCF gas and 414.4 MSTB oil that yields a total NPV of 218.7 MMUSD. The approach and methods implemented has been proven to result in more accurate production forecast and reduce the project cost as the effect of uncertainty reduction.

Oil Reserves Evaluation and Field Development plan of Hakim Oil Field in Libya

2016 ◽  
Vol 18 (1) ◽  
pp. 39-53
Author(s):  
Omar Salih ◽  
Mahmoud Tantawy ◽  
Sayed Elayouty ◽  
Atef Abd Hady
Keyword(s):  
Oil Field ◽  
Development Plan ◽  
Field Development ◽  
Oil Reserves

scholarly journals Integrated Halo Model And Hydrodynamic Simulation For Optimization Oil Production In Crystalline Fractured Reservoirs

2021 ◽  
Author(s):  
Hung Vo Thanh ◽  
Kang-Kun Lee
Keyword(s):  
Oil Recovery ◽  
History Matching ◽  
Fractured Reservoirs ◽  
Petroleum Industry ◽  
Oil Production ◽  
Modelling And Simulation ◽  
Development Plan ◽  
Sweep Efficiency ◽  
Field Development ◽  
The World

Abstract Basement formation is known as the unique reservoir in the world. The fractured basement reservoir was contributed a large amount of oil and gas for Vietnam petroleum industry. However, the geological modelling and optimization of oil production is still a challenge for fractured basement reservoirs. Thus, this study aims to introduce the efficient workflow construction reservoir models for proposing the field development plan in a fractured crystalline reservoir. First, the Halo method was adapted for building the petrophysical model. Then, Drill stem history matching is conducted for adjusting the simulation results and pressure measurement. Next, the history-matched models are used to conduct the simulation scenarios to predict future reservoir performance. The possible potential design has four producers and three injectors in the fracture reservoir system. The field prediction results indicate that this scenario increases approximately 8 % oil recovery factor compared to the natural depletion production. This finding suggests that a suitable field development plan is necessary to improve sweep efficiency in the fractured oil formation. The critical contribution of this research is the proposed modelling and simulation with less data for the field development plan in fractured crystalline reservoir. This research's modelling and simulation findings provide a new solution for optimizing oil production that can be applied in Vietnam and other reservoirs in the world.

scholarly journals A practical method for planning large number of horizontal wells with a reservoir model for a field development plan

2021 ◽  
Vol 10 ◽  
pp. 17-32
Author(s):  
Guido Fava ◽  
Việt Anh Đinh
Keyword(s):  
Horizontal Well ◽  
Horizontal Wells ◽  
Simulation Software ◽  
Production Performance ◽  
Development Plan ◽  
Regular Pattern ◽  
Production Forecast ◽  
Advanced Technique ◽  
Large Reservoir ◽  
Field Development

The most advanced technique to evaluate different solutions proposed for a field development plan consists of building a numerical model to simulate the production performance of each alternative. Fields covering hundreds of square kilometres frequently require a large number of wells. There are studies and software concerning optimal planning of vertical wells for the development of a field. However, only few studies cover planning of a large number of horizontal wells seeking full population on a regular pattern. One of the criteria for horizontal well planning is selecting the well positions that have the best reservoir properties and certain standoffs from oil/water contact. The wells are then ranked according to their performances. Other criteria include the geometry and spacing of the wells. Placing hundreds of well individually according to these criteria is highly time consuming and can become impossible under time restraints. A method for planning a large number of horizontal wells in a regular pattern in a simulation model significantly reduces the time required for a reservoir production forecast using simulation software. The proposed method is implemented by a computer script and takes into account not only the aforementioned criteria, but also new well requirements concerning existing wells, development area boundaries, and reservoir geological structure features. Some of the conclusions drawn from a study on this method are (1) the new method saves a significant amount of working hours and avoids human errors, especially when many development scenarios need to be considered; (2) a large reservoir with hundreds of wells may have infinite possible solutions, and this approach has the aim of giving the most significant one; and (3) a horizontal well planning module would be a useful tool for commercial simulation software to ease engineers' tasks.

Sign in / Sign up

Export Citation Format

Share Document