Completion of High-Rate Gas Wells, Horizontal Gravel Pack and Filter-Cake Cleanup: A Case History From the Mahogany Field, Trinidad

2004 ◽  
Author(s):  
S. Akong ◽  
I. Tinegate ◽  
H. Hassanali ◽  
S. Tocalino ◽  
D. Omonze
Keyword(s):  
Case History ◽  
Filter Cake ◽  
High Rate ◽  
Gas Wells ◽  
Gravel Pack

Corrosion in High Rate Gas Wells -- A Case History

2005 ◽  
Author(s):  
Ruben Van Grinsven ◽  
Luke Jackson ◽  
Isabel Suarez Valdivia ◽  
Marcel Bouts
Keyword(s):  
Case History ◽  
High Rate ◽  
Gas Wells

Sand Free Production Success Through Proven Technology Enabler from An Untapped Heterogeneous Reservoir Zone Utilizing Gravel Pack Replacement Methodology

2020 ◽  
Author(s):  
Y. Anggoro
Keyword(s):  
Oil And Gas ◽  
Erosion Resistance ◽  
Cost Effective ◽  
High Rate ◽  
Screen Design ◽  
Sand Control ◽  
Rules Of Thumb ◽  
Production Success ◽  
Control Technologies ◽  
Gravel Pack

The Belida field is an offshore field located in Block B of Indonesia’s South Natuna Sea. This field was discovered in 1989. Both oil and gas bearing reservoirs are present in the Belida field in the Miocene Arang, Udang and Intra Barat Formations. Within the middle Arang Formation, there are three gas pay zones informally referred to as Beta, Gamma and Delta. These sand zones are thin pay zones which need to be carefully planned and economically exploited. Due to the nature of the reservoir, sand production is a challenge and requires downhole sand control. A key challenge for sand control equipment in this application is erosion resistance without inhibiting productivity as high gas rates and associated high flow velocity is expected from the zones, which is known to have caused sand control failure. To help achieve a cost-effective and easily planned deployment solution to produce hydrocarbons, a rigless deployment is the preferred method to deploy downhole sand control. PSD analysis from the reservoir zone suggested from ‘Industry Rules of Thumb’ a conventional gravel pack deployment as a means of downhole sand control. However, based on review of newer globally proven sand control technologies since adoption of these ‘Industry Rules of Thumb’, a cost-effective solution could be considered and implemented utilizing Ceramic Sand Screen technology. This paper will discuss the successful application at Block B, Natuna Sea using Ceramic Sand Screens as a rigless intervention solution addressing the erosion / hot spotting challenges in these high rate production zones. The erosion resistance of the Ceramic Sand Screen design allows a deployment methodology directly adjacent to the perforated interval to resist against premature loss of sand control. The robust ceramic screen design gave the flexibility required to develop a cost-effective lower completion deployment methodology both from a challenging make up in the well due to a restrictive lubricator length to the tractor conveyancing in the well to land out at the desired set depth covering the producing zone. The paper will overview the success of multi-service and product supply co-operation adopting technology enablers to challenge ‘Industry Rules of Thumb’ replaced by rigless reasoning as a standard well intervention downhole sand control solution where Medco E&P Natuna Ltd. (Medco E&P) faces sand control challenges in their high deviation, sidetracked well stock. The paper draws final attention to the hydrocarbon performance gain resulting due to the ability for choke free production to allow drawing down the well at higher rates than initially expected from this zone.

A New Technical Standard Procedure to Measure Stimulation and Gravel-pack Fluid Leak-off under Dynamic Conditions

2015 ◽  
Author(s):  
Mahmoud Asadi ◽  
Brain Ainley ◽  
David Archacki ◽  
Eric Aubry ◽  
Harold Brannon ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Standard Procedure ◽  
Oil And Gas Industry ◽  
Testing Procedure ◽  
Technical Standard ◽  
Gas Wells ◽  
Dynamic Conditions ◽  
Oil And Gas Wells ◽  
Static Conditions ◽  
Gravel Pack

Abstract Historically, leak-off analyses of stimulation fluids have been performed using in-house laboratory procedures. The lack of industry standard procedures to perform leak-off and wall building coefficient analyses of stimulation fluids has introduced inconsistency in both results and reporting for many years. A technical standard adopted in 2006 by both API and ISO for static conditions has provided the oil and gas industry with the first standardized procedure to measure and report leak-off1. However, the more complex testing under dynamic conditions was not addressed. As a result, a group of industry experts have compiled their years of experiences in developing a new technical standard to measure the leak-off characteristics of stimulation and gravel-pack fluids under dynamic flow conditions. Stimulation and gravel-pack fluids are defined, for the purpose of this technical standard, as fluids used to enhance production from oil and gas wells by fracturing and fluids used to place filtration media to control formation sand production from oil and gas wells. Leak-off is the amount of fluid lost to porous media during these operations. The leak-off procedure was developed through the colaberation of several industry companies by evaluating numerous in-house laboratory techniques and conducting round robin testing to ensure that any modifications to these procedures were reliable and repeatable. The new standard provides a step-by-step procedure that includes fluid preparation, experimental equipment design, testing procedure and data analyses for fluids exhibiting viscosity controlled leak-off or wall building characteristics. Example calculations are reviewed within this paper.

Well Clean-Up Using a Combined Thermochemical/Chelating Agent Fluids

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Mohamed Mahmoud
Keyword(s):  
High Temperature ◽  
Filter Cake ◽  
Oil And Gas ◽  
Drilling Fluid ◽  
Chelating Agent ◽  
Drilling Fluids ◽  
Gas Wells ◽  
Oil And Gas Wells ◽  
Different Types ◽  
Cake Removal

The well clean-up process involves the removal of impermeable filter cake from the formation face. This process is essential to allow the formation fluids to flow from the reservoir to the wellbore. Different types of drilling fluids such as oil- and water-based drilling fluids are used to drill oil and gas wells. These drilling fluids are weighted with different weighting materials such as bentonite, calcium carbonate, and barite. The filter cake that forms on the formation face consists mainly of the drilling fluid weighting materials (around 90%), and the rest is other additives such as polymers or oil in the case of oil-base drilling fluids. The process of filter cake removal is very complicated because it involves more than one stage due to the compatibility issues of the fluids used to remove the filter cake. Different formulations were used to remove different types of filter cake, but the problem with these methods is the removal efficiency or the compatibility. In this paper, a new method was developed to remove different types of filter cakes and to clean-up oil and gas wells after drilling operations. Thermochemical fluids that consist of two inert salts when mixed together will generate very high pressure and high temperature in addition to hot water and hot nitrogen. These fluids are sodium nitrate and ammonium chloride. The filter cake was formed using barite and calcite water- and oil-based drilling fluids at high pressure and high temperature. The removal process started by injecting 500 ml of the two salts and left for different time periods from 6 to 24 h. The results of this study showed that the newly developed method of thermochemical removed the filter cake after 6 h with a removal efficiency of 89 wt% for the barite filter cake in the water-based drilling fluid. The mechanisms of removal using the combined solution of thermochemical fluid and ethylenediamine tetra-acetic acid (EDTA) chelating agent were explained by the generation of a strong pressure pulse that disturbed the filter cake and the generation of the high temperature that enhanced the barite dissolution and polymer degradation. This solution for filter cake removal works for reservoir temperatures greater than 100 °C.

New Gun Hanger Design Offers Safety / Flexibility for High Rate Gas Wells in North China Kela Field

2006 ◽  
Author(s):  
John Hales ◽  
Ian William Smith ◽  
Kee Yong Wah ◽  
Liu Jian Xun ◽  
Li Ru Yong ◽  
...  
Keyword(s):  
North China ◽  
High Rate ◽  
Gas Wells
Sign in / Sign up

Export Citation Format

Share Document