Application of Large Thermal Sector Models in a Field Performance Optimization Study of a Mature, Heavy Oil Field

2003 ◽  
Author(s):  
L. Marquez ◽  
J. Hurtado ◽  
J. Wang ◽  
F. Iwere ◽  
E. Gomez ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Performance Optimization ◽  
Field Performance ◽  
Oil Field ◽  
Optimization Study

Challenges, Opportunities and Threats of Deep Bottoms-Up Water Injection in Heavy Oil Reservoir: Lessons Learnt from the G Field, South Oman

2021 ◽  
Author(s):  
Chaitanya Behera ◽  
Sandip Mahajan ◽  
Carlos Annia ◽  
Mahmood Harthi ◽  
Jane-Frances Obilaja ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Water Injection ◽  
Field Performance ◽  
Oil Field ◽  
Oil Fields ◽  
Reservoir Pressure ◽  
Light Oil ◽  
Alternative Water ◽  
Variable Water

Abstract This paper presents the results of a comprehensive study carried out to improve the understanding of deep bottom-up water injection, which enabled optimizing the recovery of a heavy oil field in South Oman. Understanding the variable water injection response and the scale of impact on oil recovery due to reservoir heterogeneity, operating reservoir pressure and liquid offtake management are the main challenges of deep bottoms-up water injection in heavy oil fields. The offtake and throughput management philosophy for heavy oil waterflood is not same as classical light oil. Due to unclear understanding of water injection response, sometimes the operators are tempted to implement alternative water injection trials leading to increase in the risk of losing reserves and unwarranted CAPEX sink. There are several examples of waterflood in heavy oil fields; however, very few examples of deep bottom water injection cases are available globally. The field G is one of the large heavy oil fields in South Oman; the oil viscosity varies between 250cp to 1500cp. The field came on-stream in 1989, but bottoms-up water-injection started in 2015, mainly to supplement the aquifer influx after 40% decline of reservoir pressure. After three years of water injection, the field liquid production was substantially lower than predicted, which implied risk on the incremental reserves. Alternative water injection concepts were tested by implementing multiple water injection trials apprehending the effectiveness of the bottoms-up water injection concept. A comprehensive integrated study including update of geocellular model, full field dynamic simulation, produced water re-injection (PWRI) model and conventional field performance analysis was undertaken for optimizing the field recovery. The Root Cause Analysis (RCA) revealed many reasons for suboptimal field performance including water injection management, productivity impairment due to near wellbore damage, well completion issues, and more importantly the variable water injection response in the field. The dynamic simulation study indicated negligible oil bank development due to frontal displacement and no water cut reversal as initial response to the water injection. Nevertheless, the significance of operating reservoir pressure, liquid offtake and throughput management impact on oil recovery cann't be precluded. The work concludes that the well reservoir management (WRM) strategy for heavy oil field is not same as the classical light oil waterflood. Nevertheless, the reservoir heterogeneity, oil column thickness and saturation history are also important influencing factors for variable water injection response in heavy oil field.

Expierence of development of the Liael area of Yaregskoye heavy oil field using different technologies

2019 ◽  
Vol 10 ◽  
pp. 62-67
Author(s):  
S.M. Durkin ◽  
◽  
I.N. Menshikova ◽  
L.M. Rusin ◽  
A.A. Terentiev ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Oil Field

Application of Polymer Flooding in the Revitalization of a Mature Heavy Oil Field

2021 ◽  
pp. 108695
Author(s):  
L.F. Lamas ◽  
V.E. Botechia ◽  
D.J. Schiozer ◽  
M.L. Rocha ◽  
M. Delshad
Keyword(s):  
Heavy Oil ◽  
Polymer Flooding ◽  
Oil Field

Application of CSS to Develop a Thick Heavy Oil Field in South Oman

2014 ◽  
Author(s):  
Mohammed Omar Al-Manhali ◽  
Mohammed Al-rawahi ◽  
Suleiman Mohammed Al-hinai ◽  
Abdullah Alwazeer ◽  
Simon John Brissenden ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Oil Field

Review of Research on Interlayer SAGD in Domestic and Foreign

2014 ◽  
Vol 644-650 ◽  
pp. 5142-5145 ◽  
Author(s):  
Peng Luo
Keyword(s):  
Heavy Oil ◽  
Development Process ◽  
Basic Research ◽  
Technical Support ◽  
Oil Field ◽  
Oil Reservoir ◽  
Steam Chamber ◽  
Heavy Oil Reservoir

China is rich in resources of heavy oil.But some oilfield heavy oil reservoir in the development process will encounter interlining, affecting the development effect. In the process of SAGD to carry out the basic research of reservoir interlayer is helpful to identify the basic attributes of reservoir in the interlayer. The interlayer of SAGD development process is helpful to find the study focus and direction of development. Steam chamber breakthrough research achievements of interlining research abroad, summarizes the steam chamber breakthrough interlining, provide technical support for the oil field SAGD breakthrough interlining, it is of great significance for promoting SAGD efficient development.

Application and Exploration of Early In-Situ Combustion Huff-and-Puff Technology in a Deep Undisturbed Reservoir with Extra Heavy Oil

2021 ◽  
pp. 1-13
Author(s):  
Wang Xiaoyan ◽  
Zhao Jian ◽  
Yin Qingguo ◽  
Cao Bao ◽  
Zhang Yang ◽  
...  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Heavy Oil ◽  
Gas Injection ◽  
Thermal Recovery ◽  
Oil Field ◽  
Pilot Test ◽  
In Situ Combustion ◽  
Coiled Tubing

Summary Achieving effective results using conventional thermal recovery technology is challenging in the deep undisturbed reservoir with extra-heavy oil in the LKQ oil field. Therefore, in this study, a novel approach based on in-situ combustion huff-and-puff technology is proposed. Through physical and numerical simulations of the reservoir, the oil recovery mechanism and key injection and production parameters of early-stage ultraheavy oil were investigated, and a series of key engineering supporting technologies were developed that were confirmed to be feasible via a pilot test. The results revealed that the ultraheavy oil in the LKQ oil field could achieve oxidation combustion under a high ignition temperature of greater than 450°C, where in-situ cracking and upgrading could occur, leading to greatly decreased viscosity of ultraheavy oil and significantly improved mobility. Moreover, it could achieve higher extra-heavy-oil production combined with the energy supplement of flue gas injection. The reasonable cycles of in-situ combustion huff and puff were five cycles, with the first cycle of gas injection of 300 000 m3 and the gas injection volume per cycle increasing in turn. It was predicted that the incremental oil production of a single well would be 500 t in one cycle. In addition, the supporting technologies were developed, such as a coiled-tubing electric ignition system, an integrated temperature and pressure monitoring system in coiled tubing, anticorrosion cementing and completion technology with high-temperature and high-pressure thermal recovery, and anticorrosion injection-production integrated lifting technology. The proposed method was applied to a pilot test in the YS3 well in the LKQ oil field. The high-pressure ignition was achieved in the 2200-m-deep well using the coiled-tubing electric igniter. The maximum temperature tolerance of the integrated monitoring system in coiled tubing reached up to 1200°C, which provided the functions of distributed temperature and multipoint pressure measurement in the entire wellbore. The combination of 13Cr-P110 casing and titanium alloy tubing effectively reduced the high-temperature and high-pressure oxygen corrosion of the wellbore. The successful field test of the comprehensive supporting engineering technologies presents a new approach for effective production in deep extra-heavy-oil reservoirs.

A Success Story in Managing and Optimising Gas Lift Wells in Matured Oil Field: Automated Workflows in Digital Fields as Enablers to Accelerate Opportunities Creation and Production Optimisation

2021 ◽  
Author(s):  
Amir Badzly M. Nazri ◽  
W. M. Anas W. Khairul Anuar ◽  
Lucas Ignatius Avianto Nasution ◽  
Hayati Turiman ◽  
Shar Kawi Hazim Shafie ◽  
...  
Keyword(s):  
Model Validation ◽  
Field Performance ◽  
Oil Field ◽  
Working Environment ◽  
Key Factors ◽  
Collaborative Working ◽  
Water Cut ◽  
Integrated Operations ◽  
Collaborative Working Environment ◽  
Gas Lift

Abstract Field S located in offshore Malaysia had been producing for more than 30 years with nearly 90% of current active strings dependent on gas lift assistance. Subsurface challenges encountered in this matured field such as management of increasing water-cut, sand production, and depleting reservoir pressure are one of key factors that drive the asset team to continuously monitor the performance of gaslifted wells to ensure better control of production thereby meeting target deliverability of the field. Hence, Gas Lift Optimization (GLOP) campaign was embarked in Field S to accelerate short term production with integration of Gas Lift Management Modules in Integrated Operations (IO). A workflow was created to navigate asset team in this campaign from performing gaslift health check, diagnostic and troubleshooting to data and model validation until execution prior to identification of GLOP candidates with facilitation from digital workflows. Digital Fields and Integrated Operations (IO) developed in Field S provided an efficient collaborative working environment to monitor field performance real time and optimize production continuously. Digital Fields comprises of multiple engineering workflows developed and operationalized to act as enablers for the asset team to quickly identify the low-hanging fruit opportunities. This paper will focus on entire cycle process of digital workflows with engineer's intervention in data hygiene and model validation, the challenges to implement GLOP, and results from the campaign in Field S.

Sign in / Sign up

Export Citation Format

Share Document