Role of Capillary Forces In Detennining Microscopic Displacement Efficiency For Oil Recovery By Waterflooding

1974 ◽  
Vol 13 (04) ◽  
Author(s):  
J.C. Melrose
Keyword(s):  
Oil Recovery ◽  
Capillary Forces ◽  
Displacement Efficiency

Effects of Salinity on Nanosilica Applications in Altering Limestone Rock Wettability for Enhanced Oil Recovery

2015 ◽  
Vol 1125 ◽  
pp. 200-204 ◽  
Author(s):  
Wan Rosli Wan Sulaiman ◽  
A.J. Adala ◽  
Radzuan Junin ◽  
Issham Ismail ◽  
Abdul Razak Ismail ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Petroleum Industry ◽  
Wettability Alteration ◽  
Displacement Efficiency ◽  
Optimal Salinity ◽  
Reservoir Rocks ◽  
Limestone Rock ◽  
Enhance Oil Recovery

The role of nanoparticles in enhancing oil recovery from oil reservoirs is an increasingly important topic of research. Nanoparticles have the properties that are potentially useful for enhanced oil recovery (EOR) processes. One of the important roles of nanoparticles in petroleum industry is to change the wettability of reservoir rocks. The main objective of this study is to investigate the efficiency of silica nanoparticles in enhancing oil recovery in the presence of formation brine with different concentrations. The methodology of this study involved several laboratory tests. It is divided into two main sections with the aim of enhance oil recovery of oil wet reservoirs. First, the wettability alteration and oil–water interfacial tension modification induced by introducing different concentrations of nanosilica (0.01, 0.05, 0.1wt %) and different concentrations of NaCl formation brine (0.3, 1, 2, 3, 4 wt %) was studied by experimental approach. Second, the displacement test for determining oil recovery for those different concentrations of nanosilica and formation brine. There exists an optimal nanoslica concentration for varying salinity and an optimal salinity for varying nanosilica concentration at which the wettability alteration on oil wet limestone is the maximum for the study. The results revealed that IFT and contact angle tests were found to have the same optimal salinity (0.3wt %) and optimal nanosilica concentration (0.1wt %). Furthermore the highest value of displacement efficiency obtained at nanosilica (0.05wt %) and salinity (0.3 wt %) NaCl. As conclusion, as the salinity increases the extent of wettability alteration, IFT reduction, and enhanced oil recovery by nanosilica decreases.

Effect of Interfacial Tension on Displacement Efficiency

1966 ◽  
Vol 6 (04) ◽  
pp. 335-344 ◽  
Author(s):  
O.R. Wagner ◽  
R.O. Leach
Keyword(s):  
Interfacial Tension ◽  
Pressure Gradient ◽  
Oil Recovery ◽  
Experimental Approach ◽  
Capillary Forces ◽  
Water Flooding ◽  
Pressure Gradients ◽  
Displacement Efficiency ◽  
Surfactant Solutions ◽  
Increased Oil Recovery

Abstract Immiscible displacement tests were performed in a consolidated sandstone core over the interfacial tension range from less than 0.01 to 5 dynes/cm to better define how interfacial tension (IFT) reduction can lead to increased oil recovery. Data obtained were displacement efficiency at breakthrough vs IFT for both drainage and imbibition conditions. These tests simulate water flooding under oil-wet and water-wet conditions, respectively. Results of the study have shown that displacement efficiency under both oil-wet and water-wet conditions can be markedly improved by a sufficient reduction in IFT. In the particular porous media used and for the low pressure gradients employed, the IFT must be reduced to a value less than about 0.07 dynes/cm to achieve increased recovery at the time of breakthrough of the injected phase. Below 0.07 dynes/cm, further small reductions in IFT result in large increases in displacement efficiency. Observed increases in recovery were obtained at pressure gradients which are well below those which can exist in the interwell area of a reservoir under water flood. The effect of pressure gradient on recovery is discussed. INTRODUCTION A residual oil saturation remains in rock which has been water flooded because, under usual reservoir conditions, the driving force which can be generated is inadequate to expel oil trapped by capillary forces. Since these capillary forces can be reduced by reducing the IFT a frequently studied method 1-5 of increasing oil recovery has been the use of surfactants to reduce the water-oil interfacial tension. Mungan1 observed improved recovery in both water-wet and oil-wet systems at 1.1 dyne/cm IFT, finding that the amount of improvement was greater in oil-wet systems. Moore and Blum,2 working with visual flow cell micro-models, concluded that recovery cannot be improved in water-wet systems by injecting surfactant solutions. They calculated that, for a pressure gradient of 1 psi/ft in their model, the IFT must be reduced to 0.03 dynes/cm to release oil trapped under water-wet conditions. Berkeley et al.3 indicated that, at representative field flooding rates, the IFT must be reduced to 0.001 dyne/cm to improve recovery. Thus, there is a wide variation of opinion about the IFT levels needed to improve recovery under field conditions. These previous investigators all have used as their experimental method the addition of surfactants to the injected water. The use of surfactant solutions to reduce IFT creates two experimental problems:the loss of surfactant through adsorption on reservoir rock can obscure the true IFT value which exists at the displacement front, andat very low values of IFT emulsification of oil and water commonly occurs. It is difficult, therefore, to determine whether the increased recovery is caused by IFT reduction as such, or is instead caused by emulsification. Also the properties of the available surfactants limit the IFT range which can be studied. In the present study the purpose is to better define how interfacial tension reduction can lead to increased oil recovery. A matter of great interest is the amount of recovery improvement potentially achievable in this way. The study was made using very low pressure gradients which was well within the range achievable by water flooding in the interwell region of petroleum reservoirs. A unique experimental approach was chosen to avoid adsorption and emulsification problems, and to allow convenient control of IFT. The fluid phases used were the equilibrium vapor and liquid phases of the methane-n-pentane system. The interfacial tension level was varied by changing the equilibrium pressure of the methane-pentane system over the range from 1,200 psia to near the critical pressure (2,420 psia). All tests were performed at a controlled temperature of 100F. The IFT-vs-pressure relationship for the methane-pentane system was based on the data of Stegemeier and Hough,6 and on new data obtained in this study. With this experimental approach it has been possible to study displacement at lower values of IFT than have been previously investigated.

scholarly journals The Effect of Carbonyl and Hydroxyl Compounds on Swelling Factor, Interfacial Tension, and Viscosity in CO2 Injection: A Case Study on Aromatic Oils

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 94
Author(s):  
Asep Kurnia Permadi ◽  
Egi Adrian Pratama ◽  
Andri Luthfi Lukman Hakim ◽  
Doddy Abdassah
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Viscosity Reduction ◽  
Co2 Injection ◽  
Minimum Miscibility Pressure ◽  
Lower Viscosity ◽  
Hydroxyl Compounds ◽  
Swelling Factor

A factor influencing the effectiveness of CO2 injection is miscibility. Besides the miscible injection, CO2 may also contribute to oil recovery improvement by immiscible injection through modifying several properties such as oil swelling, viscosity reduction, and the lowering of interfacial tension (IFT). Moreover, CO2 immiscible injection performance is also expected to be improved by adding some solvent. However, there are a lack of studies identifying the roles of solvent in assisting CO2 injection through observing those properties simultaneously. This paper explains the effects of CO2–carbonyl and CO2–hydroxyl compounds mixture injection on those properties, and also the minimum miscibility pressure (MMP) experimentally by using VIPS (refers to viscosity, interfacial tension, pressure–volume, and swelling) apparatus, which has a capability of measuring those properties simultaneously within a closed system. Higher swelling factor, lower viscosity, IFT and MMP are observed from a CO2–propanone/acetone mixture injection. The role of propanone and ethanol is more significant in Sample A1, which has higher molecular weight (MW) of C7+ and lower composition of C1–C4, than that in the other Sample A9. The solvents accelerate the ways in which CO2 dissolves and extracts oil, especially the extraction of the heavier component left in the swelling cell.

Simulation of Miscible Displacement in Full-Diameter Carbonate Cores

1982 ◽  
Vol 22 (05) ◽  
pp. 647-657 ◽  
Author(s):  
J.P. Batycky ◽  
B.B. Maini ◽  
D.B. Fisher
Keyword(s):  
Oil Recovery ◽  
Water Saturation ◽  
Accurate Determination ◽  
Miscible Displacement ◽  
Carbonate Reservoir ◽  
Core Material ◽  
Immiscible Fluid ◽  
Displacement Efficiency ◽  
Carbonate Cores ◽  
Capacitance Model

Abstract Miscible gas displacement data obtained from full-diameter carbonate reservoir cores have been fitted to a modified miscible flow dispersion-capacitance model. Starting with earlier approaches, we have synthesized an algorithm that provides rapid and accurate determination of the three parameters included in the model: the dispersion coefficient, the flowing fraction of displaceable volume, and the rate constant for mass transfer between flowing and stagnant volumes. Quality of fit is verified with a finite-difference simulation. The dependencies of the three parameters have been evaluated as functions of the displacement velocity and of the water saturation within four carbonate cores composed of various amounts of matrix, vug, and fracture porosity. Numerical simulation of a composite core made by stacking three of the individual cores has been compared with the experimental data. For comparison, an analysis of Berea sandstone gas displacement also has been provided. Although the sandstone displays a minor dependence of gas recovery on water saturation, we found that the carbonate cores are strongly affected by water content. Such behavior would not be measurable if small carbonate samples that can reflect only matrix properties were used. This study therefore represents a significant assessment of the dispersion-capacitance model for carbonate cores and its ability to reflect changes in pore interconnectivity that accompany water saturation alteration. Introduction Miscible displacement processes are used widely in various aspects of oil recovery. A solvent slug injected into a reservoir can be used to displace miscibly either oil or gas. The necessary slug size is determined by the rate at which deterioration can occur as the slug is Another commonly used miscible process involves addition of a small slug within the injected fluids or gases to determine the nature and extent of inter well communication. The quantity of tracer material used is dictated by analytical detection capabilities and by an understanding of the miscible displacement properties of the reservoir. We can develop such understanding by performing one-dimensional (1D) step-change miscible displacement experiments within the laboratory with selected reservoir core material. The effluent profiles derived from the experiments then are fitted to a suitable mathematical model to express the behavior of each rock type through the use of a relatively small number of parameters. This paper illustrates the efficient application of the three-parameter, dispersion-capacitance model. Its application previously has been limited to use with small homogeneous plugs normally composed of intergranular and intencrystalline porosity, and its suitability for use with cores displaying macroscopic heterogeneity has been questioned. Consequently, in addition to illustrating its use with a homogeneous sandstone, we fit data derived from previously reported full-diameter carbonate cores. As noted earlier, these cores were heterogeneous, and each of them displayed different dual or multiple types of porosity characteristic of vugular and fractured carbonate rocks. Dispersion-Capacitance Model The displacement efficiency of one fluid by a second immiscible fluid within a porous medium depends on the complexity of rock and fluid properties. SPEJ P. 647^

Can unmixed complex forming polymer surfactant formulations be injected into oil reservoirs or aquifers without clogging them?

Soft Matter ◽  
2021 ◽  
Author(s):  
Massinissa Hamouna ◽  
Aline Delbos ◽  
Christine Dalmazonne ◽  
Annie Colin
Keyword(s):  
Enhanced Oil Recovery ◽  
Soil Remediation ◽  
Oil Recovery ◽  
Oil Reservoirs ◽  
Polymer Surfactant

In the context of enhanced oil recovery or soil remediation, we study the role of interactions between polymers and surfactants on the injectivity of formulations containing mixtures of polymers and...

The Combined Flooding of Dispersed Particle Gel and Surfactant for Conformance Control and EOR: From Experiment to Pilot Test

2021 ◽  
Author(s):  
Xia Yin ◽  
Tianyi Zhao ◽  
Jie Yi
Keyword(s):  
Oil Recovery ◽  
Formation Energy ◽  
High Salinity ◽  
Surfactant Solution ◽  
Pilot Test ◽  
Control Performance ◽  
Core Flooding ◽  
Displacement Efficiency ◽  
Conformance Control ◽  
And Performance

Abstract The water channeling and excess water production led to the decreasing formation energy in the oilfield. Therefore, the combined flooding with dispersed particle gel (DPG) and surfactant was conducted for conformance control and enhanced oil recovery in a high temperature (100-110°C) high salinity (>2.1×105mg/L) channel reservoir of block X in Tahe oilfield. This paper reports the experimental results and pilot test for the combined flooding in a well group of Block X. In the experiment part, the interfacial tension, emulsifying capacity of the surfactant and the particle size during aging of DPG were measured, then, the conformance control and enhanced oil recovery performance of the combined flooding was evaluated by core flooding experiment. In the pilot test, the geological backgrounds and developing history of the block was introduced. Then, an integrated study of EOR and conformance control performance in the block X are analyzed by real-time monitoring and performance after treatment. In addition, the well selection criteria and flooding optimization were clarified. In this combined flooding, DPG is applied as in-depth conformance control agent to increase the sweep efficiency, and surfactant solution slug following is used for improve the displacement efficiency. The long term stability of DPG for 15 days ensures the efficiency of in-depth conformance control and its size can increase from its original 0.543μm to 35.5μm after aging for 7 days in the 2.17×105mg/L reservoir water and at 110°C. In the optimization, it is found that 0.35% NAC-1+ 0.25% NAC-2 surfactant solution with interfacial tension 3.2×10-2mN/m can form a relatively stable emulsion easily with the dehydrated crude oil. In the double core flooding, the conformance control performance is confirmed by the diversion of fluid after combined flooding and EOR increases by 21.3%. After exploitation of Block X for 14 years, the fast decreasing formation energy due to lack of large bottom water and water fingering resulted in a decreasing production rate and increasing watercut. After combined flooding in Y well group with 1 injector and 3 producers, the average dynamic liquid level, daily production, and tracing agent breakthrough time increased, while the watercut and infectivity index decreased. The distribution rate of injected fluid and real-time monitoring also assured the conformance control performance. The oil production of this well group was increased by over 3000 tons. Upon this throughout study of combined flooding from experiment to case study, adjusting the heterogeneity by DPG combined with increasing displacement efficiency of surfactant enhanced the oil recovery synergistically in this high salinity high temperature reservoir. The criteria for the selection and performance of combined flooding also provides practical experiences and principles for combined flooding.

Research and Application of Multi-Slug and Equi-Fluidity Oil Displacement Mechanism

2015 ◽  
Vol 733 ◽  
pp. 43-46
Author(s):  
Jiang Min Zhao ◽  
Tian Ge Li
Keyword(s):  
Pressure Gradient ◽  
Flow Rate ◽  
Oil Recovery ◽  
Recovery Rate ◽  
Actual Situation ◽  
Displacement Efficiency ◽  
Displacement Method ◽  
Oil Displacement ◽  
Oil Displacement Efficiency ◽  
Swept Volume

In this paper, several aspects of the improvement of the oil recovery were analyzed theoretically based on the mechanism that equi-fluidity enhances the pressure gradient. These aspects include the increase of the flow rate and the recovery rate, of the swept volume, and of the oil displacement efficiency. Also, based on the actual situation, the author designed the oil displacement method with gathered energy equi-fluidity, realizing the expectation of enhancing oil recovery with multi-slug and equi-fluidity oil displacement method.

Sign in / Sign up

Export Citation Format

Share Document