Dynamically Overbalanced Coiled-Tubing Drilling on the North Slope of Alaska

2001 ◽  
Vol 16 (02) ◽  
pp. 91-97
Author(s):  
D.T. Kara ◽  
D.D. Hearn ◽  
L.L. Gantt ◽  
C.G. Blount
Keyword(s):  
North Slope ◽  
Coiled Tubing ◽  
The North ◽  
North Slope Of Alaska

Underbalanced Drilling with Coiled Tubing: A Case Study on the Alaskan North Slope, Which Proves the Benefits of Drilling a Straight Hole

2021 ◽  
Author(s):  
Antoni Miszewski ◽  
Adam Miszewski ◽  
Richard Stevens ◽  
Matteo Gemignani
Keyword(s):  
Relative Effectiveness ◽  
Shallow Depth ◽  
North Slope ◽  
Coiled Tubing ◽  
The North ◽  
North Slope Of Alaska ◽  
Minimum Requirements ◽  
Bottom Hole Assembly ◽  
Alaskan North Slope ◽  
Future Work

Abstract A set of 5 wells were to be drilled with directional Coiled Tubing Drilling (CTD) on the North Slope of Alaska. The particular challenges of these wells were the fact that the desired laterals were targeted to be at least 6000ft long, at a shallow depth. Almost twice the length of laterals that are regularly drilled at deeper depths. The shallow depth meant that 2 of the 5 wells involved a casing exit through 3 casings which had never been attempted before. After drilling, the wells were completed with a slotted liner, run on coiled tubing. This required a very smooth and straight wellbore so that the liner could be run as far as the lateral had been drilled. Various methods were considered to increase lateral reach, including, running an extended reach tool, using friction reducer, increasing the coiled tubing size and using a drilling Bottom Hole Assembly (BHA) that could drill a very straight well path. All of these options were modelled with tubing forces software, and their relative effectiveness was evaluated. The drilling field results easily exceeded the minimum requirements for success. This project demonstrated record breaking lateral lengths, a record length of liner run on coiled tubing in a single run, and a triple casing exit. The data gained from this project can be used to fine-tune the modelling for future work of a similar nature.

Dynamically Overbalanced Coiled Tubing Drilling on the North Slope of Alaska

1999 ◽  
Author(s):  
D.T. Kara ◽  
L.L. Gantt ◽  
C.G. Blount ◽  
D.D. Hearn
Keyword(s):  
North Slope ◽  
Coiled Tubing ◽  
The North ◽  
North Slope Of Alaska

Extended Reach Drilling with Coiled Tubing: A Case Study on the Alaskan North Slope That Proves the Benefits of Drilling a Straight Hole

2021 ◽  
pp. 1-5
Author(s):  
Antoni Miszewski ◽  
Adam Miszewski ◽  
Richard Stevens ◽  
Matteo Gemignani
Keyword(s):  
Relative Effectiveness ◽  
Shallow Depth ◽  
North Slope ◽  
Coiled Tubing ◽  
The North ◽  
North Slope Of Alaska ◽  
Minimum Requirements ◽  
Extended Reach Drilling ◽  
Alaskan North Slope ◽  
Future Work

Summary A set of five wells were to be drilled with directional coiled tubing drilling (CTD) on the North Slope of Alaska. The particular challenges of these wells were the fact that the desired laterals were targeted to be at least 6,000 ft long, at a shallow depth, almost twice the length of laterals that are regularly drilled at deeper depths. The shallow depth meant that two of the five wells involved a casing exit through three casings, which had never been attempted before. After drilling, the wells were completed with a slotted liner, run on coiled tubing (CT). This required a very smooth and straight wellbore so that the liner could be run as far as the lateral had been drilled. In this paper, we focus on one of the two wells on which triple casing exit was performed. However, the same considerations and results apply to the other wells on which the same technology has been used. Various methods were considered to increase lateral reach, including running an extended reach tool, using a friction reducer, increasing the CT size, and using a drilling bottomhole assembly (BHA) that could drill a very straight well path. All of these options were modeled with tubing forces software, and their relative effectiveness was evaluated. The drilling field results easily exceeded the minimum requirements for success. This project demonstrated record-breaking lateral lengths, a record length of liner run on CT in a single run, and a triple casing exit. The data gained from this project can be used to fine-tune the modeling for future work of a similar nature.

The Use of Diutan Biopolymer in Coiled Tubing Drilling Mud Systems on the North Slope of Alaska

2010 ◽  
Author(s):  
Jon Greggory Sarber ◽  
Charles Reynolds ◽  
Charles Michael Michel ◽  
Kelly Haag ◽  
Richard A. Morris
Keyword(s):  
North Slope ◽  
Drilling Mud ◽  
Coiled Tubing ◽  
The North ◽  
North Slope Of Alaska

Dispersive noise removal in t-x space: Application to Arctic data

Geophysics ◽  
1988 ◽  
Vol 53 (3) ◽  
pp. 346-358 ◽  
Author(s):  
Greg Beresford‐Smith ◽  
Rolf N. Rango
Keyword(s):  
Signal To Noise Ratio ◽  
Noise Analysis ◽  
Noise Removal ◽  
North Slope ◽  
Frequency Bandwidth ◽  
The North ◽  
North Slope Of Alaska ◽  
Seismic Records ◽  
Time Offset ◽  
Undersampled Data

Strongly dispersive noise from surface waves can be attenuated on seismic records by Flexfil, a new prestack process which uses wavelet spreading rather than velocity as the criterion for noise discrimination. The process comprises three steps: trace‐by‐trace compression to collapse the noise to a narrow fan in time‐offset (t-x) space; muting of the noise in this narrow fan; and inverse compression to recompress the reflection signals. The process will work on spatially undersampled data. The compression is accomplished by a frequency‐domain, linear operator which is independent of trace offset. This operator is the basis of a robust method of dispersion estimation. A flexural ice wave occurs on data recorded on floating ice in the near offshore of the North Slope of Alaska. It is both highly dispersed and of broad frequency bandwidth. Application of Flexfil to these data can increase the signal‐to‐noise ratio up to 20 dB. A noise analysis obtained from a microspread record is ideal to use for dispersion estimation. Production seismic records can also be used for dispersion estimation, with less accurate results. The method applied to field data examples from Alaska demonstrates significant improvement in data quality, especially in the shallow section.

Cloud Properties over the North Slope of Alaska: Identifying the Prevailing Meteorological Regimes

2012 ◽  
Vol 25 (23) ◽  
pp. 8238-8258 ◽  
Author(s):  
Johannes Mülmenstädt ◽  
Dan Lubin ◽  
Lynn M. Russell ◽  
Andrew M. Vogelmann
Keyword(s):  
Time Series ◽  
Climate Model ◽  
North Slope ◽  
Test Cases ◽  
Synoptic Scale ◽  
Long Time Series ◽  
The North ◽  
Cloud Properties ◽  
North Slope Of Alaska ◽  
Long Time

Abstract Long time series of Arctic atmospheric measurements are assembled into meteorological categories that can serve as test cases for climate model evaluation. The meteorological categories are established by applying an objective k-means clustering algorithm to 11 years of standard surface-meteorological observations collected from 1 January 2000 to 31 December 2010 at the North Slope of Alaska (NSA) site of the U.S. Department of Energy Atmospheric Radiation Measurement Program (ARM). Four meteorological categories emerge. These meteorological categories constitute the first classification by meteorological regime of a long time series of Arctic meteorological conditions. The synoptic-scale patterns associated with each category, which include well-known synoptic features such as the Aleutian low and Beaufort Sea high, are used to explain the conditions at the NSA site. Cloud properties, which are not used as inputs to the k-means clustering, are found to differ significantly between the regimes and are also well explained by the synoptic-scale influences in each regime. Since the data available at the ARM NSA site include a wealth of cloud observations, this classification is well suited for model–observation comparison studies. Each category comprises an ensemble of test cases covering a representative range in variables describing atmospheric structure, moisture content, and cloud properties. This classification is offered as a complement to standard case-study evaluation of climate model parameterizations, in which models are compared against limited realizations of the Earth–atmosphere system (e.g., from detailed aircraft measurements).

Changes in tall shrub abundance on the North Slope of Alaska, 2000–2010

2018 ◽  
Vol 219 ◽  
pp. 221-232 ◽  
Author(s):  
Rocio R. Duchesne ◽  
Mark J. Chopping ◽  
Ken D. Tape ◽  
Zhuosen Wang ◽  
Crystal L.B. Schaaf
Keyword(s):  
North Slope ◽  
The North ◽  
North Slope Of Alaska ◽  
Tall Shrub
Sign in / Sign up

Export Citation Format

Share Document