Innovative Seismic Data Processing Approach to Improve Signal to Noise Ratio

2001 ◽  
Author(s):  
P.P. Gupta ◽  
Kuldeep Prakash ◽  
Paramjeet Singh ◽  
M.N. Lakra
Keyword(s):  
Data Processing ◽  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Seismic Data Processing ◽  
Signal To Noise ◽  
Processing Approach ◽  
Noise Ratio

scholarly journals Application of a New Wavelet Threshold Method in Unconventional Oil and Gas Reservoir Seismic Data Denoising

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Guxi Wang ◽  
Ling Chen ◽  
Si Guo ◽  
Yu Peng ◽  
Ke Guo
Keyword(s):  
Data Processing ◽  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Random Noise ◽  
Three Dimensional ◽  
Threshold Function ◽  
Signal To Noise ◽  
Gas Reservoir ◽  
Seismic Processing ◽  
Noise Ratio

Seismic data processing is an important aspect to improve the signal to noise ratio. The main work of this paper is to combine the characteristics of seismic data, using wavelet transform method, to eliminate and control such random noise, aiming to improve the signal to noise ratio and the technical methods used in large data systems, so that there can be better promotion and application. In recent years, prestack data denoising of all-digital three-dimensional seismic data is the key to data processing. Contrapose the characteristics of all-digital three-dimensional seismic data, and, on the basis of previous studies, a new threshold function is proposed. Comparing between conventional hard threshold and soft threshold, this function not only is easy to compute, but also has excellent mathematical properties and a clear physical meaning. The simulation results proved that this method can well remove the random noise. Using this threshold function in actual seismic processing of unconventional lithologic gas reservoir with low porosity, low permeability, low abundance, and strong heterogeneity, the results show that the denoising method can availably improve seismic processing effects and enhance the signal to noise ratio (SNR).

scholarly journals Study on the Velocity Analysis Method of Low SNR Seismic Data

2021 ◽  
Vol 11 (1) ◽  
pp. 78
Author(s):  
Jianbo He ◽  
Zhenyu Wang ◽  
Mingdong Zhang
Keyword(s):  
Seismic Data ◽  
Fresnel Zone ◽  
Signal To Noise Ratio ◽  
Normal Wave ◽  
Curvature Radius ◽  
Velocity Spectrum ◽  
Velocity Analysis ◽  
Signal To Noise ◽  
Noise Ratio ◽  
Zero Offset

When the signal to noise ratio of seismic data is very low, velocity spectrum focusing will be poor., the velocity model obtained by conventional velocity analysis methods is not accurate enough, which results in inaccurate migration. For the low signal noise ratio (SNR) data, this paper proposes to use partial Common Reflection Surface (CRS) stack to build CRS gathers, making full use of all of the reflection information of the first Fresnel zone, and improves the signal to noise ratio of pre-stack gathers by increasing the number of folds. In consideration of the CRS parameters of the zero-offset rays emitted angle and normal wave front curvature radius are searched on zero offset profile, we use ellipse evolving stacking to improve the zero offset section quality, in order to improve the reliability of CRS parameters. After CRS gathers are obtained, we use principal component analysis (PCA) approach to do velocity analysis, which improves the noise immunity of velocity analysis. Models and actual data results demonstrate the effectiveness of this method.

ROBUST SVD FILTERING FOR LOW SIGNAL-TO-NOISE RATIO SEISMIC DATA

Geophysics ◽  
2021 ◽  
pp. 1-51
Author(s):  
Chao Wang ◽  
Yun Wang
Keyword(s):  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Singular Values ◽  
New Method ◽  
Signal To Noise ◽  
Coherent Noise ◽  
Edge Preserving ◽  
Singular Vectors ◽  
Reduced Rank ◽  
Noise Ratio

Reduced-rank filtering is a common method for attenuating noise in seismic data. As conventional reduced-rank filtering distinguishes signals from noises only according to singular values, it performs poorly when the signal-to-noise ratio is very low, or when data contain high levels of isolate or coherent noise. Therefore, we developed a novel and robust reduced-rank filtering based on the singular value decomposition in the time-space domain. In this method, noise is recognized and attenuated according to the characteristics of both singular values and singular vectors. The left and right singular vectors corresponding to large singular values are selected firstly. Then, the right singular vectors are classified into different categories according to their curve characteristics, such as jump, pulse, and smooth. Each kind of right singular vector is related to a type of noise or seismic event, and is corrected by using a different filtering technology, such as mean filtering, edge-preserving smoothing or edge-preserving median filtering. The left singular vectors are also corrected by using the filtering methods based on frequency attributes like main-frequency and frequency bandwidth. To process seismic data containing a variety of events, local data are extracted along the local dip of event. The optimal local dip is identified according to the singular values and singular vectors of the data matrices that are extracted along different trial directions. This new filtering method has been applied to synthetic and field seismic data, and its performance is compared with that of several conventional filtering methods. The results indicate that the new method is more robust for data with a low signal-to-noise ratio, strong isolate noise, or coherent noise. The new method also overcomes the difficulties associated with selecting an optimal rank.

Random denoising and signal nonlinearity approach by time-frequency peak filtering using weighted frequency reassignment

Geophysics ◽  
2013 ◽  
Vol 78 (6) ◽  
pp. V229-V237 ◽  
Author(s):  
Hongbo Lin ◽  
Yue Li ◽  
Baojun Yang ◽  
Haitao Ma
Keyword(s):  
Weight Function ◽  
Instantaneous Frequency ◽  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Random Noise ◽  
Signal To Noise ◽  
Transform Method ◽  
Time Frequency ◽  
Frequency Peak ◽  
Noise Ratio

Time-frequency peak filtering (TFPF) may efficiently suppress random noise and hence improve the signal-to-noise ratio. However, the errors are not always satisfactory when applying the TFPF to fast-varying seismic signals. We begin with an error analysis for the TFPF by using the spread factor of the phase and cumulants of noise. This analysis shows that the nonlinear signal component and non-Gaussian random noise lead to the deviation of the pseudo-Wigner-Ville distribution (PWVD) peaks from the instantaneous frequency. The deviation introduces the signal distortion and random oscillations in the result of the TFPF. We propose a weighted reassigned smoothed PWVD with less deviation than PWVD. The proposed method adopts a frequency window to smooth away the residual oscillations in the PWVD, and incorporates a weight function in the reassignment which sharpens the time-frequency distribution for reducing the deviation. Because the weight function is determined by the lateral coherence of seismic data, the smoothed PWVD is assigned to the accurate instantaneous frequency for desired signal components by weighted frequency reassignment. As a result, the TFPF based on the weighted reassigned PWVD (TFPF_WR) can be more effective in suppressing random noise and preserving signal as compared with the TFPF using the PWVD. We test the proposed method on synthetic and field seismic data, and compare it with a wavelet-transform method and [Formula: see text] prediction filter. The results show that the proposed method provides better performance over the other methods in signal preserving under low signal-to-noise ratio.

Triangle Ranch Headquarters field development using shallow core holes and high‐resolution seismic data

Geophysics ◽  
1989 ◽  
Vol 54 (11) ◽  
pp. 1384-1396
Author(s):  
Howard Renick ◽  
R. D. Gunn
Keyword(s):  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Processing Parameters ◽  
Mapping Method ◽  
High Signal ◽  
Signal To Noise ◽  
Near Surface ◽  
Field Development ◽  
Reef Structure ◽  
Noise Ratio

The Triangle Ranch Headquarters Canyon Reef field is long and narrow and in an area where near‐surface evaporites and associated collapse features degrade seismic data quality and interpretational reliability. Below this disturbed section, the structure of rocks is similar to the deeper Canyon Reef structure. The shallow structure exhibits very gentle relief and can be mapped by drilling shallow holes on a broad grid. The shallow structural interpretation provides a valuable reference datum for mapping, as well as providing a basis for planning a seismic program. By computing an isopach between the variable seismic datum and the Canyon Reef reflection and subtracting the isopach map from the datum map, we map Canyon Reef structure. The datum map is extrapolated from the shallow core holes. In the area, near‐surface complexities produce seismic noise and severe static variations. The crux of the exploration problem is to balance seismic signal‐to‐noise ratio and geologic resolution. Adequate geologic resolution is impossible without understanding the exploration target. As we understood the target better, we modified our seismic acquisition parameters. Studying examples of data with high signal‐to‐noise ratio and poor resolution and examples of better defined structure on apparently noisier data led us to design an acquisition program for resolution and to reduce noise with arithmetic processes that do not reduce structural resolution. Combining acquisition and processing parameters for optimum structural resolution with the isopach mapping method has improved wildcat success from about 1 in 20 to better than 1 in 2. It has also enabled an 80 percent development drilling success ratio as opposed to slightly over 50 percent in all previous drilling.

Sign in / Sign up

Export Citation Format

Share Document