Material Balance Analysis of Faulted and Stratified, Tight Gas Reservoirs

2000 ◽  
Author(s):  
Jacques Hagoort ◽  
Jaap Sinke ◽  
Barry Dros ◽  
Ferry Nieuwland
Keyword(s):  
Material Balance ◽  
Tight Gas ◽  
Gas Reservoirs ◽  
Tight Gas Reservoirs ◽  
Balance Analysis

scholarly journals A Novel Dynamic Splitting Method for Production Based on Material Balance Theory and Catastrophe Theory in Tight Gas Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Shengye Hao ◽  
Xinyu Qiu ◽  
Pengcheng Liu ◽  
Xiaoxia Chen
Keyword(s):  
Numerical Simulation ◽  
Production Process ◽  
Catastrophe Theory ◽  
Scale Effects ◽  
Splitting Method ◽  
Material Balance ◽  
Splitting Methods ◽  
Tight Gas ◽  
Gas Reservoirs ◽  
Tight Gas Reservoirs

Splitting methods play a significant role in the coproduction of tight reservoirs which are characterized by vertical multilayer superimposition. It directly affects the accuracy of reservoir performance analysis and detailed descriptions. However, conventional splitting methods are limited to a few factors and static factors without considering the effect of layer parameter change. In this study, sensitivity analysis was carried out on five factors that affect the production splitting in coproduction wells. The research shows that in the production process, multiple parameters have a direct impact on the production of layers. Different parameters, which have to be included to split production, have different scale effects on layer production. Comparing the results of the KH method with the numerical simulation results, the limitation of the KH method for yield splitting is illustrated. A novel dynamic splitting method for production (DPSM) was proposed. This method is based on two primary methods, which are the multifactor static method for production splitting of gas (GPSM) and water (WPSM) and use the catastrophe theory and material balance equation (MBE) and obtain the final results by iterative method. The advantage of this method is that more accurate results in the production process are obtained by selecting eight factors, which contain 6 static factors and 2 dynamic factors, for research. It is more in line with the production practice that the ultimate results of production splitting vary with the production process. The accuracy and practicality of the results had been verified by numerical simulation. This method has practical significance for production splitting in tight gas reservoirs.

scholarly journals Investigation of a critical choke during hydraulic-fracture flowback for a tight sandstone gas reservoir

2019 ◽  
Vol 16 (6) ◽  
pp. 1178-1190
Author(s):  
Jiachen Huang ◽  
Jinghong Hu ◽  
Wenting Zeng ◽  
Yuan Zhang
Keyword(s):  
Material Balance ◽  
Optimization Method ◽  
Tight Gas ◽  
Fracturing Fluid ◽  
Gas Reservoirs ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
Tight Gas Reservoirs ◽  
Wellhead Pressure ◽  
Secondary Damage

Abstract Low porosity and permeability in a tight sandstone gas reservoir can cause problems during fracturing. If the fracturing fluid cannot be discharged in a timely fashion after fracturing, the fracturing fluid will move into the deep formation and result in secondary damage. Conversely, if the flowback rate of the fracturing fluid is too high, it will cause the proppant to backflow and reduce the efficiency of fracturing operation. Therefore, it is very important to control the choke sizes and flowback rates for the flowback process of a tight sandstone reservoir. In this study, a model of the time of the closed fracture considering the principle of material balance is built. Subsequently, the relationship between the wellhead pressure and the optimum diameter of the choke at different times is obtained using hydrodynamics and particle dynamics theory. Finally, the proposed optimization method is applied to an actual well from the Xinjiang tight gas reservoirs. Results show that a choke diameter can be reasonably optimized under different wellhead pressures, and that fracturing fluid flows back as much as possible and without proppant backflow. A sound design of a fracturing fluid flowback system is also provided. This study presents the mechanism of post-fracturing management and provides a better understanding of the flowback system in tight gas reservoirs.

scholarly journals Estimate Gas Initially in Place of Tight Gas Reservoirs Based on Developed Methodology of Dynamic Material Balance Technique

2021 ◽  
Vol 54 (2D) ◽  
pp. 15-29
Author(s):  
Omar Al-Fatlawi
Keyword(s):  
Material Balance ◽  
Unconventional Reservoirs ◽  
Tight Gas ◽  
Gas Reservoirs ◽  
Tank Model ◽  
Gas Industry ◽  
Tight Gas Reservoirs ◽  
Global Demand ◽  
Balance Technique ◽  
Advanced Drilling

With growing global demand for hydrocarbons and decreasing conventional reserves, the gas industry is shifting its focus in the direction of unconventional reservoirs. Tight gas reservoirs have typically been deemed uneconomical due to their low permeability which is understood to be below 0.1mD, requiring advanced drilling techniques and stimulation to enhance hydrocarbons. However, the first step in determining the economic viability of the reservoir is to see how much gas is initially in place. Numerical simulation has been regarded across the industry as the most accurate form of gas estimation, however, is extremely costly and time consuming. The aim of this study is to provide a framework for a simple analytical method to estimate gas. Usually during production three variables are readily accessible: production rate, production time, and pressure-volume-temperature properties. This paper develops an analytical approach derived from the dynamic material balance proposing a new methodology to calculate pseudo time, with an interactive technique. This model encompasses pseudo functions accounting for pressure dependent fluid and rock variables. With the dynamic material balance yielding weak results in the linear flow regimes, an additional methodology derived from the volumetric tank model has been taken into consideration whereby equivalent drainage area is linked to total reservoir area. It has been shown even with short production data this volumetric approach yields accurate results. This proposed methodology has been validated against previous literature and additional cases considered to determine the sensitivity of each of it to reservoir parameters. Finally, it is shown that this method works for both fractured and unfractured wells in tight gas reservoirs, however, it is sensitive to the quantity of data based within the pseudo steady state flow period.

Data Acquistion and Formation Evaluation Strategies in Anistrospic, Tight Gas Reservoirs

2008 ◽  
Author(s):  
Hans de Koningh ◽  
Bernd Heinrich Herold ◽  
Koksal Cig ◽  
Fahd Ali ◽  
Sultan Mahruqy ◽  
...  
Keyword(s):  
Tight Gas ◽  
Gas Reservoirs ◽  
Tight Gas Reservoirs ◽  
Formation Evaluation ◽  
Evaluation Strategies ◽  
Data Acquistion
Sign in / Sign up

Export Citation Format

Share Document