Optimization of Multivariate Production-Injection System for Water-Alternating-Gas Miscible Flooding in Pubei Oil Field

2000 ◽  
Author(s):  
Daoyong Yang ◽  
Qi Zhang ◽  
Huanwen Cui ◽  
Hu Feng ◽  
Luhua Li
Keyword(s):  
Oil Field ◽  
Injection System ◽  
Water Alternating Gas ◽  
Miscible Flooding

Flow Assurance in Buzios Field: Key Challenges and Implemented Solutions

2021 ◽  
Author(s):  
Ivan Noville ◽  
Milena da Silva Maciel ◽  
Anna Luiza de Moraes y blanco de Mattos ◽  
João Gabriel Carvalho de Siqueira
Keyword(s):  
Liquid Flow Rate ◽  
Hydrate Formation ◽  
Oil Field ◽  
Oil Fields ◽  
Injection System ◽  
Flow Assurance ◽  
Water Alternating Gas ◽  
Early Design Stages ◽  
Scale Deposition ◽  
Full Operation

Abstract This article's goal is to present some of the main flow assurance challenges faced by PETROBRAS in the Buzios oil field, from its early design stages to full operation, up to this day. These challenges include: hydrate formation in WAG (Water Alternating Gas) operations; reliability of the chemical injection system to prevent scale deposition; increasing GLR (Gas Liquid Ratio) management and operations with extremely high flowrates. Flow assurance experience amassed in Buzios and in other pre-salt oil fields, regarding all these presented issues, is particularly relevant for the development of future projects with similar characteristics, such as high liquid flow rate, high CO2 content and high scaling potential.

Tracer Technology for Water-Alternating-Gas Miscible Flooding in Pubei Oil Field

2000 ◽  
Author(s):  
Daoyong Yang ◽  
Huanwen Cui ◽  
Qi Zhang ◽  
Luhua Li ◽  
Zheng Wu
Keyword(s):  
Oil Field ◽  
Water Alternating Gas ◽  
Miscible Flooding

Nanotechnology Helps Decrease Pressure, Increase Injection in Offshore China Oil Field

2021 ◽  
Vol 73 (09) ◽  
pp. 58-59
Author(s):  
Chris Carpenter
Keyword(s):  
Water Injection ◽  
Injection Pressure ◽  
Gas Production ◽  
Oil Field ◽  
Water Flooding ◽  
Injection System ◽  
Bohai Bay ◽  
Reservoir Properties ◽  
Positive Effects ◽  
Offshore Technology

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper OTC 30407, “Case Study of Nanopolysilicon Materials’ Depressurization and Injection-Increasing Technology in Offshore Bohai Bay Oil Field KL21-1,” by Qing Feng, Nan Xiao Li, and Jun Zi Huang, China Oilfield Services, et al., prepared for the 2020 Offshore Technology Conference Asia, originally scheduled to be held in Kuala Lumpur, 2–6 November. The paper has not been peer reviewed. Copyright 2020 Offshore Technology Conference. Reproduced by permission. Nanotechnology offers creative approaches to solve problems of oil and gas production that also provide potential for pressure-decreasing application in oil fields. However, at the time of writing, successful pressure-decreasing nanotechnology has rarely been reported. The complete paper reports nanopolysilicon as a new depressurization and injection-increasing agent. The stability of nanopolysilicon was studied in the presence of various ions, including sodium (Na+), calcium (Ca2+), and magnesium (Mg2+). The study found that the addition of nanomaterials can improve porosity and permeability of porous media. Introduction More than 600 water-injection wells exist in Bohai Bay, China. Offshore Field KL21-1, developed by water-flooding, is confronted with the following challenges: - Rapid increase and reduction of water-injection pressure - Weak water-injection capacity of reservoir - Decline of oil production - Poor reservoir properties - Serious hydration and expansion effects of clay minerals To overcome injection difficulties in offshore fields, conventional acidizing measures usually are taken. But, after multiple cycles of acidification, the amount of soluble substances in the rock gradually decreases and injection performance is shortened. Through injection-performance experiments, it can be determined that the biological nanopolysilicon colloid has positive effects on pressure reduction and injection increase. Fluid-seepage-resistance decreases, the injection rate increases by 40%, and injection pressure decreases by 10%. Features of Biological Nanopolysilicon Systems The biological nanopolysilicon-injection system was composed of a bioemulsifier (CDL32), a biological dispersant (DS2), and a nanopolysilicon hydrophobic system (NP12). The bacterial strain of CDL32 was used to obtain the culture colloid of biological emulsifier at 37°C for 5 days. DS2 was made from biological emulsifier CDL32 and some industrial raw materials described in Table 1 of the complete paper. Nanopolysilicon hydrophobic system NP12 was composed of silicon dioxide particles. The hydrophobic nanopolysilicons selected in this project featured particle sizes of less than 100 nm. In the original samples, a floc of nanopolysilicon was fluffy and uniform. But, when wet, nanopolysilicon will self-aggregate and its particle size increases greatly. At the same time, nanopolysilicon features significant agglomeration in water. Because of its high interface energy, nanopolysilicon is easily agglomerated, as shown in Fig. 1.

The Key Technology Research of the Water Injection System Energy Saving for Super Low Permeability Reservoir in Changqing Oil Field

2012 ◽  
Vol 524-527 ◽  
pp. 1217-1222 ◽  
Author(s):  
Zhi Qiang Huang ◽  
Zhen Chen ◽  
Gang Zheng ◽  
Jian Qiang Xue ◽  
Xue Yuan Li
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Large Scale ◽  
Water Injection ◽  
High Energy ◽  
Economic Benefits ◽  
Oil Field ◽  
Injection System ◽  
Low Permeability ◽  
Load Rate

With the characteristics of low permeability, pressure and abundance, it's extremely hard to exploit the super low permeability reservoirs in ChangQing oil field. For this reason, the water injection recovery technique has been widely used. Analysis showed that a serious problem of high energy consumption exist in the water injection system, the power consumption of which accounts for about 44%. And the energy cost of pump units reach up to 43%, it's the highest energy consumption link in the system. In this paper the load rate classification method (LRCM) is firstly adopted to statistical analyze water injection stations, which are divided into the owing and over load rate stations. As a result, the owing load rate stations accounts for 83.8%, with a serious phenomenon of the Big Horse Pull A Small Carriage, causing the large-scale backflow in the station, and the efficiency is low, the energy consumption is on the high side. Aimed at water injection stations with different load rate, the methods of reasonable shutting down the pumps, pump replacement, optimizing the transmission ratio and piston size, as well as the speed control technology have been used to make the outlet flow and actual demand reasonable matching. The test result shows that the energy saving technology is well targeted, simple, practical and low cost. The pump units’ efficiency improves obviously, the consumption reduces by 10%, which greatly improve the oilfield economic benefits.

Laboratory Evaluation Experiment for Adaptability Analysis of Nitrogen Injection in Yanchang Oil Field

2021 ◽  
Author(s):  
Jiaxi Gao ◽  
Yuedong Yao ◽  
He Bao ◽  
Jinjiang Shen
Keyword(s):  
Field Test ◽  
Formation Energy ◽  
Gas Injection ◽  
Water Injection ◽  
Oil Field ◽  
Injection System ◽  
Laboratory Evaluation ◽  
Energy Supplement ◽  
Nitrogen Injection ◽  
Wide Range

Abstract: Yanchang Oilfield conducts systematic research on nitrogen injection to enhance oil recovery. Through the research of this project, the energy supplement method of horizontal wells suitable for the study area is determined, and its injection system and process parameters are optimized and determined. The optimal energy replenishment method selected by the mine field test achieves the following economic and technical indicators: Provide a nitrogen suitability evaluation plan; Complete the nitrogen flooding matching process design of the target well; Complete the design of the injection-production plan for the target well; Compare with other energy supplement methods. Through the analysis of two supplementary energy methods of water injection and gas injection in indoor and similar reservoirs, the following understandings have been obtained: (1) Nitrogen is insoluble in water, slightly soluble in oil, good swelling, large elastic energy, is an inert gas, exists widely in the atmosphere, inexhaustible, inexhaustible, has a wide range of sources. (2) the recovery rate of nitrogen flooding is significantly higher than that of water flooding. (3) The field test results of water injection and nitrogen test in similar reservoirs show that the supplementary formation energy of nitrogen injection is suitable for the later development of Chang 64 and Chang 71 in the Haobasi oil field. (4) Compared with deep ultra-low permeability reservoirs, it is more economical to use nitrogen to supplement formation energy and change oil. The rate is higher. From the above analysis, it can be seen that the supplementary energy of Chang 64 and Chang 71 reservoirs in the Haobasi oil area should be nitrogen injection as the main supplement, and water injection as a supplement. Gas/water alternate injection is used to adjust the gas injection profile to slow down the escape of injected nitrogen. . Although water injection supplements the formation energy with greater uncertainty, it can be used as a technical means of fluidity control in the gas injection process and is relatively economical.

The Statfjord Field, Blocks 33/9, 33/12 Norwegian sector, Blocks 211/24, 211/25 UK sector, Northern North Sea

2003 ◽  
Vol 20 (1) ◽  
pp. 335-353 ◽  
Author(s):  
K. A. Gibbons ◽  
C. A. Jourdan ◽  
J. Hesthammer
Keyword(s):  
North Sea ◽  
Water Injection ◽  
Upper Jurassic ◽  
Lower Jurassic ◽  
Oil Field ◽  
Reservoir Properties ◽  
Water Alternating Gas ◽  
Net To Gross ◽  
Northern North Sea ◽  
Dipping Strata

AbstractThe Statfjord Field, the largest oil field in the Northern North Sea, straddles the Norway/UK boundary and is located on the southwestern part of the Tampen Spur within the East Shetland Basin. The accumulation is trapped in a 6-8° W-NW dipping rotated fault block comprised of Jurassic-Triassic strata sealed by Middle to Upper Jurassic and Cretaceous shalesReserves are located in three separate reservoirs: Middle Jurassic deltaic sediments of the Brent Group, Lower Jurassic marine-shelf sandstones and siltstones of the Dunlin Group; and Upper Triassic-lowermost Jurassic fluviatile sediments of the Statfjord Formation. The majority of reserves are contained within the Brent Group; and Statfjord Formation sediments which exhibit good to excellent reservoir properties with porosities ranging from 20-30% permeabilities ranging up to several darcies, and an average net-to-gross of 60-75%. The sandstones and siltstones of the Dunlin Group have poorer reservoir properties where the best reservoir unit exhibits an average porosity of 22%, an average permeability 300 raD and net-to-gross of 45%Structurally, the field is subdivided into a main field area characterized by relatively undeformed W-NW dipping strata, and a heavily deformed east flank area characterized by several phases of 'eastward' gravitational collapseProduction from the field commenced in 1979 and as of January 2000, 176 wells have been drilled. The oil is undersaturated and no natural gas-cap is present. The drainage strategy has been to develop the Brent and Dunlin Group reservoir with pressure maintenance using water injection and the Statfjord Formation reservoir by miscible gas flood. However, a strategy to improve recovery by implementing water alternating gas (WAG) methods is gradually being implemented for both the Brent and Statfjord reservoirs. Current estimates indicate that by 2015 a total of 666 x 106Sm3 (4192 MMBBL) of oil will be recovered and 75 GSm3 (2.66 TCF) gas will be exported from the field

Corrosion of water injection system in Shengli Oil Field

2013 ◽  
Vol 60 (4) ◽  
pp. 185-193 ◽  
Author(s):  
Dong Liu ◽  
Huiqing Liu ◽  
Li Li ◽  
Meng Yu ◽  
Jun Gong ◽  
...  
Keyword(s):  
Water Injection ◽  
Oil Field ◽  
Injection System
Sign in / Sign up

Export Citation Format

Share Document