Hydraulic Fracturing Technique for Low Permeability Coalbed Methane Gas Reservoirs

1997 ◽  
Author(s):  
Zhao Jinzhou ◽  
Guo Dali ◽  
Hu Yongquan ◽  
Chen Wenbin ◽  
Tian Jidong ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Coalbed Methane ◽  
Low Permeability ◽  
Gas Reservoirs ◽  
Methane Gas

scholarly journals Pre-acid system for improving the hydraulic fracturing effect in low-permeability tight gas reservoir

2021 ◽  
Vol 11 (4) ◽  
pp. 1761-1780
Author(s):  
Nianyin Li ◽  
Fei Chen ◽  
Jiajie Yu ◽  
Peihong Han ◽  
Jia Kang
Keyword(s):  
Hydraulic Fracturing ◽  
Filter Cake ◽  
Low Permeability ◽  
Tight Gas ◽  
Acid System ◽  
Fracturing Fluid ◽  
Gas Reservoirs ◽  
Tight Gas Reservoirs ◽  
Acid Fracturing ◽  
Performance Requirements

AbstractHydraulic fracturing is an important technical means to improve the development effect of low-permeability oil and gas reservoirs. However, for low pressure, low-permeability, tight, and high-clay sandstone gas reservoirs, conventional propped fracturing can cause serious damage to the reservoir and restrict the fracturing effect. The pre-acid fracturing technology combines acid treatment technology with sand-fracturing technology. A pre-acid system that meets special performance requirements is injected before fracturing. The pre-acid reduces the formation fracture pressure and removes clay damage. During acid flowback, the fracturing fluid is promoted to break the gel, dissolve the fracturing fluid residue and polymer filter cake, clean the supporting cracks, and effectively improve the fracturing effect. This study analyzes the process principle and technical advantages of the pre-acid fracturing technology based on the laboratory evaluation of the fracturing damage mechanism of low-permeability tight gas reservoirs. To meet the performance requirements of low-permeability tight gas reservoirs and pre-acid fracturing technology, a set of polyhydrogen acid system with long-lasting slow reactivity, low damage, and low corrosion was developed and used as the pre-fracturing acid. The acid system is mainly composed of the main agent SA601 and the auxiliary agent SA701. Then, on the basis of laboratory experiments, this acid system is used as the fracturing pre-acid to evaluate the fracturing improvement effect. The results show that the fracturing fluid system can better dissolve the fracturing fluid filter cake and remove the fracturing fluid damage.

scholarly journals Investigation on the CBM Extraction Techniques in the Broken-Soft and Low-Permeability Coal Seams in Zhaozhuang Coalmine

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Zhaoying Chen ◽  
Xuehai Fu ◽  
Guofu Li ◽  
Jian Shen ◽  
Qingling Tian ◽  
...  
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Coalbed Methane ◽  
Research Result ◽  
Horizontal Stress ◽  
Gas Production ◽  
Vertical Stress ◽  
Low Permeability ◽  
Coal Seams

To enhance the coalbed methane (CBM) extraction in broken-soft coal seams, a method of drilling a horizontal well along the roof to hydraulically fracture the coal seam is studied (i.e., HWR-HFC method). We first tested the physical and mechanical properties of the broken-soft and low-permeability (BSLP) coal resourced from Zhaozhuang coalmine. Afterward, the in situ hydraulic fracturing test was conducted in the No. 3 coal seam of Zhaozhuang coalmine. The results show that (1) the top part of the coal seam is fractured coal, and the bottom is fragmented-mylonitic coal with a firmness coefficient value of less than 1.0. (2) In the hydraulic fracturing test of the layered rock-coal specimens in laboratory, the through-type vertical fractures are usually formed if the applied vertical stress is the maximum principal stress and is greater than 4 MPa compared with the maximum horizontal stress. However, horizontal fractures always developed when horizontal stress is the maximum or it is less than 4 MPa compared with vertical stress. (3) The in situ HWR-HFC hydraulic fracturing tests show that the detected maximum daily gas production is 11,000 m3, and the average gas production is about 7000 m3 per day. This implies that the CBM extraction using this method is increased by 50%~100% compared with traditional hydraulic fracturing in BSLP coal seams. The research result could give an indication of CBM developing in the broken-soft and low-permeability coal seams.

Hydraulic Fracturing Treatment of Low-Permeability Coal Seam Gas Reservoirs with Finely Layered Coals

2018 ◽  
Author(s):  
Xi Zhang ◽  
Bisheng Wu ◽  
Luke Connell ◽  
Yanhui Han ◽  
Robert Jeffrey
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Low Permeability ◽  
Coal Seam Gas ◽  
Gas Reservoirs

scholarly journals A numerical investigation on the performance of hydraulic fracturing in naturally fractured gas reservoirs based on stimulated rock volume

2020 ◽  
Vol 10 (8) ◽  
pp. 3333-3345
Author(s):  
Ali Al-Rubaie ◽  
Hisham Khaled Ben Mahmud
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Natural Fracture ◽  
Shear Stresses ◽  
Individual Element ◽  
Natural Fractures ◽  
Gas Reservoirs ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Naturally Fractured

Abstract All reservoirs are fractured to some degree. Depending on the density, dimension, orientation and the cementation of natural fractures and the location where the hydraulic fracturing is done, preexisting natural fractures can impact hydraulic fracture propagation and the associated flow capacity. Understanding the interactions between hydraulic fracture and natural fractures is crucial in estimating fracture complexity, stimulated reservoir volume, drained reservoir volume and completion efficiency. However, because of the presence of natural fractures with diffuse penetration and different orientations, the operation is complicated in naturally fractured gas reservoirs. For this purpose, two numerical methods are proposed for simulating the hydraulic fracture in a naturally fractured gas reservoir. However, what hydraulic fracture looks like in the subsurface, especially in unconventional reservoirs, remain elusive, and many times, field observations contradict our common beliefs. In this study, the hydraulic fracture model is considered in terms of the state of tensions, on the interaction between the hydraulic fracture and the natural fracture (45°), and the effect of length and height of hydraulic fracture developed and how to distribute induced stress around the well. In order to determine the direction in which the hydraulic fracture is formed strikethrough, the finite difference method and the individual element for numerical solution are used and simulated. The results indicate that the optimum hydraulic fracture time was when the hydraulic fracture is able to connect natural fractures with large streams and connected to the well, and there is a fundamental difference between the tensile and shear opening. The analysis indicates that the growing hydraulic fracture, the tensile and shear stresses applied to the natural fracture.

The Seepage Pressure Distribution and the Capacity of Low-Permeability Reservoirs Gas

2013 ◽  
Vol 734-737 ◽  
pp. 1317-1323
Author(s):  
Liang Dong Yan ◽  
Zhi Juan Gao
Keyword(s):  
Mathematical Model ◽  
Pressure Distribution ◽  
Low Permeability ◽  
Flow State ◽  
Klinkenberg Effect ◽  
Gas Reservoirs ◽  
Gas Well ◽  
Seepage Pressure ◽  
Slippage Effect ◽  
Low Permeability Reservoirs

Low-permeability gas reservoirs are influenced by slippage effect (Klinkenberg effect) , which leads to the different of gas in low-permeability and conventional reservoirs. According to the mechanism and mathematical model of slippage effect, the pressure distribution and flow state of flow in low-permeability gas reservoirs, and the capacity of low-permeability gas well are simulated by using the actual production datum.

Sign in / Sign up

Export Citation Format

Share Document