Application and impact of the film-forming product used to protect coastal shorelines

Clean Electron Microscope Substrate Films Used for Micrometeorite Collection and Study

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100061847 ◽

1967 ◽

Vol 25 ◽

pp. 366-367

Author(s):

D. M. Davies ◽

R. Kemner ◽

E. F. Fullam

Keyword(s):

Thin Film ◽

Electron Microscope ◽

High Altitude ◽

Amyl Acetate ◽

Temperature Variations ◽

Film Forming ◽

Film Specimen ◽

Particulate Contaminants

All serious electron microscopists at one time or another have been concerned with the cleanliness and freedom from artifacts of thin film specimen support substrates. This is particularly important where there are relatively few particles of a sample to be found for study, as in the case of micrometeorite collections. For the deposition of such celestial garbage through the use of balloons, rockets, and aircraft, the thin film substrates must have not only all the attributes necessary for use in the electron microscope, but also be able to withstand rather wide temperature variations at high altitude, vibration and shock inherent in the collection vehicle's operation and occasionally an unscheduled violent landing.Nitrocellulose has been selected as a film forming material that meets these requirements yet lends itself to a relatively simple clean-up procedure to remove particulate contaminants. A 1% nitrocellulose solution is prepared by dissolving “Parlodion” in redistilled amyl acetate from which all moisture has been removed.

Download Full-text

A Freeze Shadow Technique for the Preparation of Soft Paint Latexes for Electron Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100079097 ◽

1977 ◽

Vol 35 ◽

pp. 314-315

Author(s):

Earl R. Walter ◽

Glen H. Bryant

Keyword(s):

Sample Preparation ◽

High Vacuum ◽

Vacuum System ◽

Latex Particles ◽

New Methods ◽

Diffusion Pump ◽

Film Forming ◽

Routine Basis ◽

Distribution Studies ◽

Preparation Techniques

With the development of soft, film forming latexes for use in paints and other coatings applications, it became desirable to develop new methods of sample preparation for latex particle size distribution studies with the electron microscope. Conventional latex sample preparation techniques were inadequate due to the pronounced tendency of these new soft latex particles to distort, flatten and fuse on the substrate when they dried. In order to avoid these complications and obtain electron micrographs of undistorted latex particles of soft resins, a freeze-dry, cold shadowing technique was developed. The method has now been used in our laboratory on a routine basis for several years.The cold shadowing is done in a specially constructed vacuum system, having a conventional mechanical fore pump and oil diffusion pump supplying vacuum. The system incorporates bellows type high vacuum valves to permit a prepump cycle and opening of the shadowing chamber without shutting down the oil diffusion pump. A baffeled sorption trap isolates the shadowing chamber from the pumps.

Download Full-text

Modern devices for treatment of the surgeon’s hands and the surgical field (literature review)

Disinfection affairs ◽

10.35411/2076-457x-2020-4-41-50 ◽

2020 ◽

pp. 41-50

Author(s):

Artem Mikhailovich Morozov ◽

◽

Alexey Nikolaevich Sergeev ◽

Gennady Alexandrovich Dubatolov ◽

Nikolay Alexandrovich Sergeev ◽

...

Keyword(s):

Cost Effective ◽

Surgical Infection ◽

Operating Field ◽

Functional Additives ◽

Literary Sources ◽

Film Forming ◽

Key Points ◽

Surgical Field ◽

Ammonium Compounds ◽

Active Substances

The aim – analyze modern Russian and foreign literary sources in order to determine modern means for treating the hands of the surgeon and the operating field. Results. One of the key points in the prevention of surgical infection is the treatment of the surgeon’s hands and the operating field with effective skin antiseptics in order to destroy pathogenic and opportunistic microorganisms that colonize intact skin. In modern practice, skin antiseptics are predominantly used containing alcohols as active substances, in particular ethyl, propyl and isopropyl, halogenated substances such as iodine and iodophores, guanidines, which include chlorhexidine digluconate, as well as quaternary ammonium compounds. Moreover, the most widespread are combined preparations containing several active substances and functional additives, which makes it possible to neutralize the negative properties of various active substances. Also, an interesting and promising direction is the use of polymer operating films or film-forming antiseptics. Currently, research is being actively carried out aimed at finding and developing modern highly effective antiseptic agents and their rational combinations that meet the necessary requirements, are optimal in their properties, cost-effective and comfortable to use.

Download Full-text

Effect of plant film-forming anti-transpirant on transpiration efficiency of winter wheat flag-leaf

CHINESE JOURNAL OF ECO-AGRICULTURE ◽

10.3724/sp.j.1011.2011.01091 ◽

2012 ◽

Vol 19 (5) ◽

pp. 1091-1095

Author(s):

Chang-Hai SHI ◽

Shao-Hua KONG ◽

Hong-Mei ZHAI ◽

Jing YANG ◽

Dong-Xiao LI ◽

...

Keyword(s):

Winter Wheat ◽

Flag Leaf ◽

Transpiration Efficiency ◽

Film Forming

Download Full-text

Fire Extinguishing Agents, Aqueous Film Forming Foam (AFFF) Liquid Concentration Partial Percentage

10.21236/ada585472 ◽

1989 ◽

Author(s):

Richard N. Vickers

Keyword(s):

Fire Extinguishing ◽

Liquid Concentration ◽

Film Forming

Download Full-text

In the stability of paints and varnishes for protective and decorative wood finish

Известия СПбЛТА ◽

10.21266/2079-4304.2016.215.244-254 ◽

2016 ◽

Author(s):

Ю.И. Цой

Keyword(s):

Organic Solvents ◽

Evaluation Criteria ◽

Ternary Systems ◽

Solubility Parameters ◽

Formaldehyde Resin ◽

Film Forming ◽

The Difference ◽

Molecular Forces ◽

The Stability ◽

Thermodynamic Interaction

Задача получения однородного состава ЛКМ сводится к правильному выбору пленкообразователей и соответствующих растворителей и, в случае необходимости, разбавителей и добавок. На основе положений теории растворимости была проведена оценка совместимости компонентов и стабильности таких систем. Критериями оценки были приняты параметры растворимости и термодинамического взаимодействия. Исследовали совместимость алкидных лаков с аминоформальдегидными смолами в бутаноле, и результаты этих исследований представлены в треугольной фазовой диаграмме. Для оценки совместимости смол по результатам расчета параметров термодинамического взаимодействия были построены спинодали для тройных систем. Как показывает анализ результатов проведенных исследований, даже при большой разности ?? = |?12 – ?13| = 0,2 наблюдается небольшая область несовместимости. С уменьшением разности ?? область несовместимости сужается. При ?23 > ?с область несовместимости расширяется как для ? = 0,2, так и для ?? = 0,1 и ?? = 0. Таким образом, для таких систем на совместимость компонентов, в первую очередь, влияет их взаимодействие между собой – чем оно больше, тем лучше они совместимы. Проведенные исследования показали, что парциальные параметры растворимости, учитывающие природу когезионных сил, более объективно характеризуют растворимость пленкообразующих смол в органических растворителях, чем их общий параметр растворимости. Растворимость пленкообразующих алкидных и этерифицированных аминоформальдегидных смол в органических растворителях обусловлена термодинамическим взаимодействием молекулярных сил различной природы. Стабильность смеси алкидной и этерифицированной аминоформальдегидной смолы в бутаноле обусловлена в большей степени термодинамическим взаимодействием молекулярных сил; при этом степень бутанолизации меламиноформальдегидной смолы оказывает наибольшее влияние на стабильность cистемы. Проведенные исследования по стабильности лакокрасочных смесей из различных пленкообразующих смол на основе рассмотренных критериев оценки могут быть использованы для совершенствования технологии защитно-декоративной отделки древесины. The problem of obtaining a homogeneous composition of the coatings is reduced to the proper selection of film-forming agents, and diluent and, if appropriate, diluents and additives. On the basis of the theory of solubility, we have carried out the assessment of the compatibility of the components and stability of such systems. The evaluation criteria were adopted the parameters of the solubility and thermodynamic interaction. Researched the compatibility with alkyd varnishes aminoformaldehyde resin in butanol, and the results of these studies are presented in the triangular phase diagram. To evaluate the compatibility of the resins according to the results of calculation of thermodynamic parameters of interaction were built spinodal for ternary systems. As the analysis of the results of the studies, even when the difference ??|?12 – ?13| = 0,2 there is a small area of incompatibility. With the decrease of the difference ? ? region incompatibility narrows. When ?23> ?с region incompatibility extends to ?? = 0,2, and for ?? = 0.1 and ?? = 0. Thus, for such systems, compatibility of components, primarily, affects their interaction with each other – the further away it is, the better they are compatible. Studies have shown that the partial solubility parameters, which take into account the nature of cohesive forces, more objectively characterize the solubility of film-forming resins in organic solvents than their total solubility parameter. The solubility and film-forming aminoformaldehyde esterified alkyd resins in organic solvents due to thermodynamic interaction of molecular forces of different nature. Тhe stability of the mixture and aminoformaldehyde esterified alkyd resin in butanol is generated largely by thermodynamic forces of molecular interaction; the degree of butanolate melamine-formaldehyde resin has the greatest effect on the stability of the system. Conducted research on the stability of the paint mixtures of various film-forming resins on the basis of the evaluation criteria can be used to improve the technology of protective and decorative wood finish.

Download Full-text

New surface treatment techniques to minimize copper alloy leaching in drinking water

Water Practice & Technology ◽

10.2166/wpt.2012.082 ◽

2012 ◽

Vol 7 (4) ◽

Author(s):

Norikazu Sugaya

Keyword(s):

Surface Treatment ◽

Raw Materials ◽

Organic Film ◽

Forming Process ◽

Mixed Acid ◽

Treatment Techniques ◽

Acid Washing ◽

Washing Process ◽

Film Forming ◽

Materials Used

This new surface treatment is simple and easy as well as low in cost. The processes can even be performed by hand. Pharmaceutical raw materials used for the surface treatment, such as hydrochloric acid and nitric acid used in a mixed acid washing process and vegetable oil used in an organic film forming process, are easily obtained in many countries.

Download Full-text

Chitosan Nanoparticles: An Approbative System for the Delivery of Herbal Bioactives

The Natural Products Journal ◽

10.2174/2210315510999201124155627 ◽

2020 ◽

Vol 10 ◽

Author(s):

Sapna Saini ◽

Sanju Nanda ◽

Anju Dhiman

Keyword(s):

Drug Delivery ◽

Drug Delivery Systems ◽

State Of The Art ◽

Chitosan Nanoparticles ◽

Delivery Systems ◽

Intrinsic Properties ◽

Amino Groups ◽

Suitable Candidate ◽

Film Forming ◽

Novel Drug

: Chitosan, a natural biodegradable polymer obtained from deacetylation of chitin, has been used as an approbative macromolecule for the development of various novel drug delivery systems. It is one of the most favorable biodegradable carriers for nanoparticulate drug delivery due to its intrinsic properties, such as biocompatibility, biodegradability, non-toxicity, availability of free reactive amino groups, and ease of chemical modification into different active derivatives. Furthermore, interesting physical properties (film-forming, gelling and thickening) make it a suitable candidate for formulations, such as films, microcapsules, beads, nanoparticles, nanofibres, nanogel and so on. Researchers have reported that chitosan nanoparticles act as a promising vehicle for herbal actives as they provide a superior alternative to traditional carriers and improve pharmaceutical efficiency. As no review of chitosan nanoparticles encapsulating herbal extracts and bioactives has been published till date, a maiden effort has been made to collate and review the use of chitosan nanoparticles for the entrapment of phytoconstituents to yield stable, efficient and safe drug delivery systems. Additionally, the paper presents a comprehensive account of the state-of the-art in fabricating herbal chitosan nanoparticles and their current pharmacological status. A list of patents on chitosan nanoparticles of herbal actives has also been included. This review is intended to serve as a didactic discourse for the formulation scientists endeavoring to develop advanced delivery systems for herbal actives.

Download Full-text