Wellbore Stability, Drilling Fluids Design, and the Drilling Performance of Horizontal Wells in Unconsolidated Oil Sands at Peace River, Alberta

1995 ◽  
Author(s):  
B.K. Warren ◽  
P.J. McLellan ◽  
C.A. Pratt
Keyword(s):  
Oil Sands ◽  
Horizontal Wells ◽  
Wellbore Stability ◽  
Drilling Fluids ◽  
Peace River ◽  
Drilling Performance

PLANNING AND DRILLING OF SINUOUS HORIZONTAL WELLS FOR THE GRIFFIN AREA DEVELOPMENT

1994 ◽  
Vol 34 (1) ◽  
pp. 19
Author(s):  
D. Berean ◽  
T. Slate ◽  
T. Wallace ◽  
R. Aldred ◽  
L. Hedger ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Vertical Section ◽  
Horizontal Wells ◽  
Wellbore Stability ◽  
Production Performance ◽  
Drilling Fluids ◽  
Planning Period ◽  
Horizontal Drilling ◽  
Formation Evaluation ◽  
Area Development

The Griffin Area Development in the Barrow Sub-basin of Western Australia consists of three major oil fields, the Griffin, Scindian and Chinook fields.One of many new concepts of subsea technology used for the Griffin Area Development is the application of horizontal wells with a sinuous profile to improve oil recovery in the Birdrong reservoir.Reservoir simulation modelling initiated the concept and as a result, a multi-disciplined team was formed early in the pre-development phase to plan and implement a horizontal drilling program. Issues which were addressed by this team during planning included wellbore stability, drilling fluids, liner and completion design, wellpath orientation, reservoir constraints and formation evaluation techniques.After an extensive planning period, three sinuous path horizontal wells, Griffin-5(H), Griffin-6/ST1(H) and Scindian-2/STI(H) were successfully drilled in early 1993 by a semi-submersible rig as part of the Griffin/Scindian fields development drilling program.These sinuous wells have a well path profile which intersects the reservoir in three low-angle passes of the vertical section over a horizontal length of between 800 and 950 m, in the shape of a sine wave.A feature of the wells was the use of geosteering techniques to keep the sinuous profile on track to intersect specific reservoir targets, using the latest in formation evaluation measurement while drilling (FEMWD) technology.Although technically successful, the economic benefit of the horizontal wells will be measured by their production performance when tied into the 'Griffin Venture' floating production facility, expected on stream in early 1994.

Applications of Nanomaterials in Wellbore Fluids in Oil and Gas Fields

2021 ◽  
Vol 881 ◽  
pp. 33-37
Author(s):  
Wei Na Di
Keyword(s):  
Oil And Gas ◽  
Drill String ◽  
Wellbore Stability ◽  
Petroleum Engineering ◽  
Cement Stone ◽  
Drilling Fluids ◽  
Cement Slurry ◽  
Oil And Gas Fields ◽  
Gas Channeling ◽  
Gas Fields

The application of nanomaterials in oil and gas fields development has solved many problems and pushed forward the development of petroleum engineering technology. Nanomaterials have also been used in wellbore fluids. Nanomaterials with special properties can play an important role in improving the strength and flexibility of mud cake, reducing friction between the drill string and wellbore and maintaining wellbore stability. Adding nanomaterials into the cement slurry can eliminate gas channeling through excellent zonal isolation and improve the cementing strength of cement stone, thereby facilitating the protection and discovery of reservoirs and enhancing the oil and gas recovery. This paper tracks the application progress of nanomaterials in wellbore fluids in oil and gas fields in recent years, including drilling fluids, cement slurries. Through the tracking and analysis of this paper, it is concluded that the applications of nanomaterials in wellbore fluids in oil and gas fields show a huge potential and can improve the performance of wellbore fluids.

Revealing Hidden Information: High-Resolution Logging-While-Drilling Slowness Measurements and Imaging Using Advanced Dual Ultrasonic Technology

2021 ◽  
Vol 62 (1) ◽  
pp. 89-108
Author(s):  
Matthew Blyth ◽  
◽  
Naoki Sakiyama ◽  
Hiroshi Hori ◽  
Hiroaki Yamamoto ◽  
...  
Keyword(s):  
High Resolution ◽  
Elastic Wave ◽  
Horizontal Wells ◽  
Wellbore Stability ◽  
Frequency Range ◽  
Ultrasonic Technology ◽  
Logging While Drilling ◽  
Pulse Echo ◽  
Depth Of Investigation ◽  
Wave Properties

A new logging-while-drilling (LWD) acoustic tool has been developed with novel ultrasonic pitch-catch and pulse-echo technologies. The tool enables both high-resolution slowness and reflectivity images, which cannot be addressed with conventional acoustic logging. Measuring formation elastic-wave properties in complex, finely layered formations is routinely attempted with sonic tools that measure slowness over a receiver array with a length of 2 ft or more depending upon the tool design. These apertures lead to processing results with similar vertical resolutions, obscuring the true slowness of any layering occurring at a finer scale. If any of these layers present significantly different elastic-wave properties than the surrounding rock, then they can play a major role in both wellbore stability and hydraulic fracturing but can be absent from geomechanical models built on routine sonic measurements. Conventional sonic tools operate in the 0.1- to 20-kHz frequency range and can deliver slowness information with approximately 1 ft or more depth of investigation. This is sufficient to investigate the far-field slowness values but makes it very challenging to evaluate the near-wellbore region where tectonic stress redistribution causes pronounced azimuthal slowness variation. This stress-induced slowness variation is important because it is also a key driver of wellbore geomechanics. Moreover, in the presence of highly laminated formations, there can be a significant azimuthal variation of slowness due to layering that is often beyond the resolution of conventional sonic tools due to their operating frequency. Finally, in horizontal wells, multiple layer slownesses are being measured simultaneously because of the depth of investigation of conventional sonic tools. This can cause significant interpretational challenges. To address these challenges, an entirely new design approach was needed. The novel pitch-catch technology operates over a wide frequency range centered at 250 kHz and contains an array of receivers having a 2-in. receiver aperture. The use of dual ultrasonic technology allows the measurement of high-resolution slowness data azimuthally as well as reflectivity and caliper images. The new LWD tool was run in both vertical and horizontal wells and directly compared with both wireline sonic and imaging tools. The inch-scale slownesses obtained show characteristic features that clearly correlate to the formation lithology and structure indicated by the images. These features are completely absent from the conventional sonic data due to its comparatively lower vertical resolution. Slowness images from the tool reflect the formation elastic-wave properties at a fine scale and show dips and lithological variations that are complementary to the data from the pulse-echo images. The physics of the measurement are discussed, along with its ability to measure near-wellbore slowness, elastic-wave properties, and stress variations. Additionally, the effect of the stress-induced, near-wellbore features seen in the slowness images and the pulse-echo images is discussed with the wireline dipole shear anisotropy processing.

Redevelopment of a Matured Multilayered Carbonate Offshore Field Through High Technology Horizontal and Multilateral Wells

2007 ◽  
Vol 10 (05) ◽  
pp. 453-457 ◽  
Author(s):  
Rajesh Kumar ◽  
S. Ramanan ◽  
J.L. Narasimham
Keyword(s):  
New Technologies ◽  
High Technology ◽  
Horizontal Wells ◽  
Development Stage ◽  
Scientific Data ◽  
Carbonate Reservoir ◽  
Western India ◽  
Drilling Fluids ◽  
Well Productivity ◽  
Offshore Field

Summary Oil productivity from Mumbai High field, an offshore multilayered carbonate reservoir, increased significantly through the implementation of a major redevelopment program. Geoscientific information available from approximately 700 exploratory and develop- ment wells drilled in the field during nearly 25 years was incorporated during geological and reservoir simulation modeling of the field. High-technology drilling (viz. horizontal/multilaterals for the new development wells) was adopted on field scale to effectively address typical complexity of the layered carbonate reservoirs. Since the commencement of the project in 2000, approximately 140 new wells were drilled, mostly with horizontal and multilateral drainholes. Besides these, more than 70 suboptimal producers were also converted as horizontal sidetracks under brownfield development. The horizontal sidetracks were drilled as long-drift sidetrack (LDST), extended-reach drilling (ERD), LDST-ERD, short-drift sidetrack (SDST), and medium-radius drainhole (MRDH) types of wells through the application of innovative and emerging drilling technologies with nondamaging drilling fluids, whipstocks to kick off sidetrack wells, rotary-steering systems, and expandable tubulars to complete horizontal sidetracks in lower layers. With the implementation of this project, the declining trend was fully arrested and a significant upward trend in production has been established. Introduction The field redevelopment process requires the intergration of reservoir-development strategies, facility options, and drilling and production philosophies to maximize oil and gas recovery from a matured field. A significant number of case studies are available on mature field revitalization using a multidisciplinary team concept, exhaustive geo-scientific data analysis, and new drilling technologies (Chedid and Colmenares 2002; Clark et al. 2000; Dollens et al. 1999; Kinchen et al. 2001). Advancements in drilling and completion technology have enabled construction of horizontal wells with longer wellbores, more-complex well geometry, and sophisticated completion designs. Horizontal wells provide an effective method to produce bypassed oil from matured fields. In the early 1980s, this technology was in the development stage and was used in limited applications. By the 1990s, the technology had matured, and its acceptance in the industry had increased significantly. Performance of horizontal/multilateral wells, risk assessment of horizontal-well productivity and comparison of horizontal- and vertical-well performance in different fields is available in literature (Babu and Aziz 1989; Brekke and Thompson 1996; Economides et al. 1989; Joshi 1987; Joshi and Ding 1995; Mukherjee and Economides 1991; Norris et al. 1991; Vij et al. 1998). A significant number of horizontal/multilateral development wells were drilled as a part of redevelopment of Mumbai High, a matured multilayered carbonate offshore field in Western India. The details of new technologies applied and performance of these new high-technology wells are presented in this paper. Besides comparison of well productivity of horizontal and conventional sidetrack wells, this paper presents some technical issues faced.

A Novel Double-Group Crosslinked Hydrogel with High Thixotropy for Water Control in Horizontal Wells

SPE Journal ◽  
2020 ◽  
pp. 1-15
Author(s):  
Gang Li ◽  
Lifeng Chen ◽  
Meilong Fu ◽  
Lei Wang ◽  
Yadong Chen ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Gelation Time ◽  
Horizontal Wells ◽  
Uniform Grid ◽  
Drilling Fluids ◽  
Water Production ◽  
Water Control ◽  
Recovery Coefficient ◽  
Metastable Structure ◽  
Control Water

Summary Horizontal wells that are completed with slotted liners often suffer from a severe water-production problem, which is detrimental to oil recovery. It is because the annulus between the slotted liners and wellbore cannot be fully filled with common hydrogels with poor thixotropy, which determines the ultimate hydrogel filling shape in the annulus. This paper presents a novel hydrogel with high thixotropy to effectively control water production in horizontal wells. This study is aimed at evaluating the thixotropic performance, gelation time, plugging performance, and degradation performance. The thixotropic performance of the new hydrogel was also investigated by measuring its rheological properties and examining its microstructures. It was found that the new hydrogel thickened rapidly after shearing. Its thixotropic recovery coefficient was 1.747, which was much higher than those of traditional hydrogels. The gelation time can be controlled in the range of 2 to 8 hours by properly adjusting the concentrations of the framework material, crosslinker, and initiator. The hydrogel could be customized for mature oil reservoirs, at which it was stable for more than 90 days. A series of laboratory physical modeling tests showed that the breakthrough pressure gradient and the plugging ratio of the hydrogel in sandpacks were higher than 9.5 MPa/m and 99%, respectively. At the same time, it was found that the hydrogel has good degradation properties; the viscosity of the hydrogel breaking solution was 4.22 mPa·s. Freeze-etching scanning-electron-microscopy examinations indicated that the hydrogel had a uniform grid structure, which can be broken easily by shear and restored quickly. This led to the remarkable thixotropic performance. The formation of a metastable structure caused by the electrostatic interaction and coordination effect was considered to be the primary reason for the high thixotropy. The successful development of the new thixotropic hydrogel not only helps to control water production from the horizontal wells, but also furthers the thixotropic theory of hydrogel. This study also provides technical guidelines for further increasing the thixotropies of drilling fluids, fracturing fluids, and other enhanced-oil-recovery polymers that are commonly used in the petroleum industry.

Simulating the effect of subsurface stresses and transient pore pressure on wellbore stability in subsea horizontal wells

2019 ◽  
Vol 41 (16) ◽  
pp. 2028-2038
Author(s):  
Ubedullah Ansari ◽  
Cheng YuanFang ◽  
Li QingChao ◽  
Georgia George Mawaipopo ◽  
Jia Wei
Keyword(s):  
Pore Pressure ◽  
Horizontal Wells ◽  
Wellbore Stability

scholarly journals Laponite: a promising nanomaterial to formulate high-performance water-based drilling fluids

2020 ◽  
Author(s):  
Xian-Bin Huang ◽  
Jin-Sheng Sun ◽  
Yi Huang ◽  
Bang-Chuan Yan ◽  
Xiao-Dong Dong ◽  
...  
Keyword(s):  
High Performance ◽  
Drilling Fluid ◽  
Nitrogen Adsorption ◽  
Drill String ◽  
Wellbore Stability ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Mechanism Analysis ◽  
Water Based ◽  
Inhibition Performance

Abstract High-performance water-based drilling fluids (HPWBFs) are essential to wellbore stability in shale gas exploration and development. Laponite is a synthetic hectorite clay composed of disk-shaped nanoparticles. This paper analyzed the application potential of laponite in HPWBFs by evaluating its shale inhibition, plugging and lubrication performances. Shale inhibition performance was studied by linear swelling test and shale recovery test. Plugging performance was analyzed by nitrogen adsorption experiment and scanning electron microscope (SEM) observation. Extreme pressure lubricity test was used to evaluate the lubrication property. Experimental results show that laponite has good shale inhibition property, which is better than commonly used shale inhibitors, such as polyamine and KCl. Laponite can effectively plug shale pores. It considerably decreases the surface area and pore volume of shale, and SEM results show that it can reduce the porosity of shale and form a seamless nanofilm. Laponite is beneficial to increase lubricating property of drilling fluid by enhancing the drill pipes/wellbore interface smoothness and isolating the direct contact between wellbore and drill string. Besides, laponite can reduce the fluid loss volume. According to mechanism analysis, the good performance of laponite nanoparticles is mainly attributed to the disk-like nanostructure and the charged surfaces.

Sign in / Sign up

Export Citation Format

Share Document