Improvements in Defining the Magnitude of the Minimum In-Situ Stress Using Hydraulic Impedance Testing and Pressure Derivative Analysis

1994 ◽  
Author(s):  
P.T. Branagan
Keyword(s):  
In Situ Stress ◽  
Pressure Derivative ◽  
Hydraulic Impedance ◽  
Derivative Analysis ◽  
Impedance Testing

Multiple In-Situ Stress Measurements in Carbonate Reservoirs for CO2 Injection Capability Assessment and Far-Field Strain Calibrations

2022 ◽  
Author(s):  
Javier Alejandro Franquet ◽  
Viraj Nitin Telang ◽  
Hayat Abdi Ibrahim Jibar ◽  
Karem Alejandra Khan
Keyword(s):  
Oil Recovery ◽  
Fracture Initiation ◽  
In Situ Stress ◽  
Carbonate Reservoirs ◽  
Lateral Strain ◽  
Co2 Injection ◽  
Far Field ◽  
Pressure Derivative ◽  
Fracture Closure

Abstract The scope of this work is to measure downhole fracture-initiation pressures in multiple carbonate reservoirs located onshore about 50 km from Abu Dhabi city. The objective of characterizing formation breakdown across several reservoirs is to quantify the maximum gas and CO2 injection capacity on each reservoir layer for pressure maintenance and enhance oil recovery operations. This study also acquires pore pressure and fracture closure pressure measurements for calibrating the geomechanical in-situ stress model and far-field lateral strain boundary conditions. Several single-probe pressure drawdown and straddle packer microfrac injection tests provide accurate downhole measurements of reservoir pore pressure, fracture initiation, reopening and fracture closure pressures. These tests are achieved using a wireline or pipe-conveyed straddle packer logging tool capable to isolate 3 feet of openhole formation in a vertical pilot hole across five Lower Cretaceous carbonate reservoirs zones. The fracture closure pressures are obtained from three decline methods during the pressure fall-off after fracture propagation injection cycle. The three methods are: (1) square-root of the shut-in time, (2) G-Function pressure derivative, and (3) Log-Log pressure derivative. The far-field strain values are estimated by multi-variable regression from the microfrac test data and the core-calibrated static elastic properties of the formations where the stress tests are done. The reservoir pressure across these carbonate formations are between 0.48 to 0.5 psi/ft with a value repeatability of 0.05 psi among build-up tests and 0.05 psi/min of pressure stability. The formation breakdown pressures are obtained between 0.97 and 1.12 psi/ft over 5,500 psi above hydrostatic pressure. The in-situ fracture closure measurements provide the magnitude of the minimum horizontal stress 0.74 - 0.83 psi/ft which is used to back-calculate the lateral strain values (0.15 and 0.72 mStrain) as far-field boundary condition for subsequent geomechanical modeling. These measurements provide critical subsurface information to accurately predict wellbore stability, hydraulic fracture containment and CO2 injection capacity for effective enhance oil recovery within these reservoirs. This in-situ stress wellbore data represents the first of its kind in the field allowing petroleum and reservoir engineers to optimize the subsurface injection plans for efficient field developing.

Effects of In-situ Stress on Blasting Damage during Deep Tunnel Excavation

2021 ◽  
Author(s):  
Sheng Luo ◽  
Peng Yan ◽  
Wen-Bo Lu ◽  
Ming Chen ◽  
Gao-Hui Wang ◽  
...  
Keyword(s):  
In Situ Stress ◽  
Deep Tunnel ◽  
Tunnel Excavation
Sign in / Sign up

Export Citation Format

Share Document