Current Calibration and Quality Control Practices for Selected Measurement-While-Drilling Tools

1991 ◽  
Author(s):  
J.B. Brami
Keyword(s):  
Quality Control ◽  
Drilling Tools ◽  
Measurement While Drilling

scholarly journals Moisture-Resistant Sealing Materials for Downhole HPHT Electrical Feedthrough Package

2019 ◽  
Vol 16 (3) ◽  
pp. 141-148
Author(s):  
Hua Xia ◽  
Nelson Settles ◽  
David DeWire
Keyword(s):  
High Temperature ◽  
Water Immersion ◽  
Electrical Power ◽  
Covalent Bond ◽  
Phase Structures ◽  
Sealing Material ◽  
Drilling Tools ◽  
Measurement While Drilling ◽  
Sealing Materials ◽  
Moisture Resistant

Abstract A bismuth oxide–based multicomponent glass system, xH3BO3-yBi2O3-(1-x-y-δ)MO-δ· rare earth oxides (REOs) with MO = TiO2, BaO, ZnO, Fe2O3, etc., and lanthanum series–based REOs, for making downhole high-pressure and high-temperature electrical feedthrough package has been developed using high-temperature melt-quenching and sintering technologies. By properly controlling phase structures in material-manufacturing processes, the obtained sealing materials have shown moisture-resistant properties in their monoclinic and tetragonal mixed phase structures but strongly hydrophobic properties in their covalent bond tetragonal phase. Sealed electrical feedthrough packages have been evaluated under boiling water immersion and 200°C/30,000 PSI water-fluid–simulated downhole harsh environments. The post electrical insulation measurement has demonstrated to be greater than 1.0 × 1014 Ω electrical resistance. This article will show that such a high–bonding strength and high–insulation strength sealing material could be used to seal electrical feed-throughs and connectors for 300°C/30,000 PSI downhole and subsea wireline, logging while drilling, and measurement while drilling tools' signal, data, and electrical power transmissions.

Integrated Underreamer Technology with Real-Time Communication Helped Eliminate Rathole in Exploratory Operation Offshore Nigeria

2021 ◽  
Author(s):  
Raphael Chidiogo Ozioko ◽  
Humphrey Osita ◽  
Udochukwu Ohia
Keyword(s):  
Real Time ◽  
New Technology ◽  
Telemetry System ◽  
Operational Risks ◽  
Drilling Performance ◽  
Drilling Tools ◽  
Measurement While Drilling ◽  
Drilling Operations ◽  
Logging While Drilling ◽  
Fast Activation

Abstract This paper describes the successful deployment of integrated underreamer technology with real-time communication through mud-pulse telemetry system, to drill and eliminate rathole in 17 1/2-in × 20-in successfully in one run and helped set casing as close as possible to the depth of suspected pressure ramp on an exploratory well offshore Nigeria. This technology uses the same communication system (actuator bypass) as Measurement While Drilling tools (MWD), Logging While Drilling tools (LWD) and Rotary Steerable System (RSS). Integrated underreamers broadly used in the drilling operations support optimized casing and completion programs and helps reduce operational risks such as wellbore instability. The ball drop and hydraulically activated reamer technologies available today comes with limitations and HSE risks. The distinctive functionalities of the integrated underreamer technology described here, such as unlimited and fast activation and deactivation via downlinking and real time downhole feedback, reduce uncertainties and operational costs in the complex and challenging deep offshore drilling operations. The real-time communication through mud-pulse telemetry system enabled the placement of integrated underreamer 6 meters from the bit thereby reducing rathole length to approximately 9 meters compared to 80 meters for conventional underreamer application. The integrated underreamer is compatible with existing RSS and provide unlimited activation cycles. The integrated underreamer offers flexibility in placement in the bottom hole assembly (BHA) and it can be used as a near bit reamer, or as main reamer or as both. In this case, the integrated near bit underreamer eliminated the need for a dedicated rathole removal run. It also offered a feedback confirmation of the cutter blades activation status and provided hole opening log thereby reducing the operational uncertainties for the under reaming, saving rig time up to 16 hours for shoulder test. The underreamer was successfully deployed to drill and ream the challenging 14 ¾" × 17 ½" and ream 17 ½" × 20" section offshore Nigeria. Both sections were drilled and reamed to section Total Depth (TD) in one run with all directional reuirements and Measuring While Drilling (MWD)/Logging While Drilling (LWD) met saving client approximately 4 days of rig spread cost. The reamer appeared to provide an in-gauge borehole allowing for successful running and cementing of liners without any issues, demonstrating superior borehole quality. The new Technology proved to be a reliable and flexible hole enlargement while drilling solution that help to improve drilling performance, reduce operational risks and save cost.

INTRODUCTION OF NEW TECHNOLOGY INTO TIMOR SEA OPERATIONS

1990 ◽  
Vol 30 (1) ◽  
pp. 290
Author(s):  
D. Bond ◽  
N. Brock ◽  
G. Chapman ◽  
K. Lay ◽  
G. Wormald
Keyword(s):  
Production Technology ◽  
Cost Reduction ◽  
New Technology ◽  
Drilling Tools ◽  
Pdc Bit ◽  
Exploration And Production ◽  
Measurement While Drilling ◽  
Production Success ◽  
Timor Sea ◽  
Evaluation Techniques

The Timor Sea is the most remote and under-explored oil province in Australia. In order to compensate for the high exploration costs which result in frontier areas, new technology has been introduced by BHP Petroleum in order to increase drilling efficiency, assist in well evaluation and enhance the reliability of production technology. Examples of innovation and the importation of advanced techniques into the Timor Sea region are discussed. Advanced mud systems and PDC bit designs have been developed to aid the drilling of wells. Measurement While Drilling tools and tritium tracers have been used to enhance correlation and evaluation techniques. Equipment and procedures which emphasise the philosophy of reliability and longevity have been developed for sub-sea completions. These innovations have not only assisted with cost reduction, but have also enhanced BHP Petroleum's exploration and production success in the Timor Sea.

Reduction in Backup Tool Requirements: Risks vs. Benefits, a Probability Analysis

2021 ◽  
pp. 1-14
Author(s):  
Steven Johannesen ◽  
Thomas Lagarigue ◽  
Gordon Shearer ◽  
Karen Owen ◽  
Grant Wood ◽  
...  
Keyword(s):  
North Sea ◽  
Financial Risk ◽  
Risk Model ◽  
Probability Model ◽  
Directional Drilling ◽  
The North ◽  
Drilling Tools ◽  
Measurement While Drilling ◽  
Financial Impacts ◽  
Binomial Models

Summary A review of the use of measurement while drilling (MWD), logging while drilling (LWD), and directional drilling (DD) tools mobilized to offshore drilling units in the North Sea highlighted an opportunity to lower operational cost for the operator and reduce capital used for the oilfield services company. An objective was set to develop a risk-based probability model that would assess the positive and negative financial impacts of reducing, or perhaps entirely removing, backup tools in this historically risk-averse basin. The scope of the initial analysis was a drilling campaign on a single rig contracted by the operator (Rig A). This analysis was then extended to review scenarios in which several operations in close proximity would share backup tools. The last 3 years of MWD/LWD/DD tool reliability data from North Sea operations, recorded by the oilfield services company, were used as an input. To assess the probability of failure, a binomial model was developed to create a binomial distribution for each tool to calculate the probability of having zero to X failures for a selected tool or bottomhole assembly (BHA) for a given number of runs. Three binomial models were developed to study the effect of “easy,” “moderate,” and “challenging” drilling environments on tool reliability. A financial risk model was designed to balance the probability-weighted cost of failure for the operator against the lower costs resulting from reduced tool provision by the oilfield services company. To better estimate risks and financial impacts on the project, a sensitivity analysis was performed on the financial risk model using the three binomial models. As a result of the analysis, it was demonstrated that recent improvements in tool reliability support a reduction in the provision of backup MWD/LWD/DD drilling tools for the majority of North Sea drilling scenarios.

Non Stationary Next Generation Measurement While Drilling Tools

2019 ◽  
Author(s):  
Mahmoud ElGizawy ◽  
Ross Lowdon ◽  
Michael Breen ◽  
Katerina Brovko ◽  
Michael Edmunds ◽  
...  
Keyword(s):  
Next Generation ◽  
Drilling Tools ◽  
Measurement While Drilling
Sign in / Sign up

Export Citation Format

Share Document