Field-Applied Computerized Tracking System: A Practical Approach to On-Site Quality Control

1991 ◽  
Vol 3 (05) ◽  
pp. 22-28
Author(s):  
D.L. Purvis ◽  
R.J. Novotny ◽  
B.T. Carlson
Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 340
Author(s):  
Elisa Chiodi ◽  
Francesco Damin ◽  
Laura Sola ◽  
Lucia Ferraro ◽  
Dario Brambilla ◽  
...  

The manufacture of a very high-quality microarray support is essential for the adoption of this assay format in clinical routine. In fact, poorly surface-bound probes can affect the diagnostic sensitivity or, in worst cases, lead to false negative results. Here we report on a reliable and easy quality control method for the evaluation of spotted probe properties in a microarray test, based on the Interferometric Reflectance Imaging Sensor (IRIS) system, a high-resolution label free technique able to evaluate the variation of the mass bound to a surface. In particular, we demonstrated that the IRIS analysis of microarray chips immediately after probe immobilization can detect the absence of probes, which recognizably causes a lack of signal when performing a test, with clinical relevance, using fluorescence detection. Moreover, the use of the IRIS technique allowed also to determine the optimal concentration of the probe, that has to be immobilized on the surface, to maximize the target recognition, thus the signal, but to avoid crowding effects. Finally, through this preliminary quality inspection it is possible to highlight differences in the immobilization chemistries. In particular, we have compared NHS ester versus click chemistry reactions using two different surface coatings, demonstrating that, in the diagnostic case used as an example (colorectal cancer) a higher probe density does not reflect a higher binding signal, probably because of a crowding effect.


2014 ◽  
Vol 5 (1) ◽  
pp. 156-164 ◽  
Author(s):  
D. Brdjanovic ◽  
F. Zakaria ◽  
P. M. Mawioo ◽  
H. A. Garcia ◽  
C. M. Hooijmans ◽  
...  

This paper presents the innovative emergency Sanitation Operation System (eSOS) concept created to improve the entire emergency sanitation chain and provide decent sanitation to people in need. The eSOS kit is described including its components: eSOS smart toilets, an intelligent excreta collection vehicle-tracking system, a decentralized excreta treatment facility, an emergency sanitation coordination center, and an integrated eSOS communication and management system. The paper further deals with costs and the eSOS business model, its challenges, applicability and relevance. The first application, currently taking place in the Philippines will bring valuable insights on the future of the eSOS smart toilet. It is expected that eSOS will bring changes to traditional disaster relief management.


2014 ◽  
Vol 57 ◽  
pp. 89-98 ◽  
Author(s):  
Jorge Coello ◽  
Leonardo Pérez ◽  
Francisco Domínguez ◽  
Miguel Navarrete

2018 ◽  
Vol 35 (1) ◽  
pp. 97-104 ◽  
Author(s):  
Giovanni Turtulici ◽  
Davide Orlandi ◽  
Giorgia Dedone ◽  
Giovanni Mauri ◽  
Alessandro Fasciani ◽  
...  

Author(s):  
Joseba Andia Iturrate ◽  
Elena Garay Llorente ◽  
Alejandro Rezola Carasusan ◽  
Edurne Echevarria Guerrero ◽  
Elena Lopez Santamaria ◽  
...  

2014 ◽  
Vol 6 (1) ◽  
pp. 45-79 ◽  
Author(s):  
Sean Carlin ◽  
Kevin Curran

Indoor radio frequency tracking systems are generally quite expensive and can vary in accuracy due to interference, equipment quality or other environmental factors. Due to these limiting factors of the technology, many businesses today find it hard to justify investing in RFID tracking technologies to improve the safety, efficiency and security of their working environments. The aim of this project was to provide a budget RFID tracking system that was capable of tracking a person or object through an indoor environment. To minimize the cost of the RFID tracking system, the components of the system were built from existing electronic equipment and hardware. The software was also written to minimize licensing and support fees allowing a cost effective budget RFID tracking system to be developed. The tracking system consists of a tag, reader nodes and a PC reader which utilize synapse RF 100 engines with python scripts embedded on to the chips. The tracking system software operates through a web portal utilizing web technologies such as HTML, JavaScript and PHP to allow the tags location to be represented on a two dimensional map using scalable vector graphics. During development of the system a new trilateration algorithm was developed and used convert the signals received from the tag to a virtual position on the map correlating to the actual physical position of the tag. A unique contribution of this system is the low cost of building which we estimate as less than £200 UK sterling for a five node system.


Sign in / Sign up

Export Citation Format

Share Document