Production and Performance Evaluation of Biodetergents as an Alternative to Conventional Drilling Detergent

2021 ◽  
Author(s):  
Augustine Azubike Azuokwu ◽  
Yakubu Yerima ◽  
Rowland Ugochukwu Azike
Keyword(s):  
Physicochemical Properties ◽  
Ricinus Communis ◽  
Penaeus Monodon ◽  
Environmentally Friendly ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Surface Active Agents ◽  
And Performance ◽  
Edible Seed ◽  
Conventional Drilling

Abstract Drilling detergents are among the chemical compounds that are increasingly being used in many varieties of drilling fluids. They are aqueous blend of surface-active agents that reduces the surface tension of water-based drilling fluids, reduces the sticking tendency of water-sensitive shale cuttings and aid cuttings removal; leading to cleaner hole, faster penetration rates and lower drilling pressure. Due to the increase in environmental issues associated with the disposal of drilling detergent presently used, drilling companies are exploring options of using environmentally friendly, degradable and renewable drilling detergents. In this study, biodetergents were produced from non-edible seed oils (Ricinus communis oil and Azadirachta Indica oil). The biodetergents and a commercial drilling detergent used in the Niger Delta field were analysed for a number of standard properties required for good drilling detergents. Drilling muds formulated with these detergents were also analysed for a number of standard mud properties. Physicochemical properties analyses showed that biodetergents met the required specification of good drilling detergents. The physicochemical properties of the biodetergents were also comparable to that of commercial drilling detergent. BOD values obtained showed that the biodetergents could easily be broken or biodegraded than the commercial drilling detergent. Toxicity test on Penaeus Monodon showed that biodetergents are more environmentally friendly than the commercial drilling detergent. Drilling mud properties analyses further showed that synthesized biodetergents can be used as an alternative to conventional drilling detergent.

Effect of the Synthesis Method on Physicochemical Properties and Performance of Cu/ZnO/Nb2O5 Catalysts for CO2 Hydrogenation to Methanol

2021 ◽  
Author(s):  
Cássia S. Santana ◽  
Luiza S. Shine ◽  
Luiz H. Vieira ◽  
Ricardo J. Passini ◽  
Ernesto A. Urquieta-González ◽  
...  
Keyword(s):  
Physicochemical Properties ◽  
Synthesis Method ◽  
Co2 Hydrogenation ◽  
And Performance

scholarly journals Novel Formulation of Environmentally Friendly Oil Based Drilling Mud

10.5772/51236 ◽  
2012 ◽  
Author(s):  
Adesina Fadairo ◽  
Olugbenga Falode ◽  
Churchill Ako ◽  
Abiodun Adeyemi ◽  
Anthony Ameloko
Keyword(s):  
Environmentally Friendly ◽  
Drilling Mud

scholarly journals Discussion on the Design and Performance of the Whole Packaging Box of Environmentally Friendly Packaging Materials

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Mengwei Xie
Keyword(s):  
Wear Resistance ◽  
Single Layer ◽  
Environmentally Friendly ◽  
Relative Deformation ◽  
Packaging Materials ◽  
Opening Displacement ◽  
Base Paper ◽  
Value Range ◽  
And Performance ◽  
Positive Axis

More and more designers and companies in the packaging industry begin to pay attention to research on environmentally friendly packaging design. From studying the additional functions of packaging to starting to study the environmentally friendly materials of packaging, as well as the “zero-pollution” packaging advocated today, the traditional form and mode of packaging has changed. This article aims to study the design of the overall packaging box of environmentally friendly packaging materials and discuss its performance. In this paper, the platform construction method and the modulus definition classification method are used to calculate the positive axis stiffness of the single-layer board. The effect of coating process on the wear resistance of paper-based materials was studied, the wear resistance of box board base paper and coated box board under different temperatures and different humidity conditions was compared, and the optimal design variable value range was set. The experimental results show that after the first level of optimization, the overall mass of the structure is reduced from the initial 39.42 kg to 31.18 kg and the optimization efficiency is 20.90%; the maximum relative deformation of the flap structure has increased from 0.143 mm to 0.198 mm, despite having the maximum tension. The opening displacement has increased, but it still meets the sealing deformation requirements. The design and performance discussion of the overall packaging box of environmentally friendly packaging materials have been completed relatively well.

scholarly journals Numerical Modeling of Foam Drilling Hydraulics

2007 ◽  
Vol 4 (1) ◽  
pp. 103 ◽  
Author(s):  
Ozcan Baris ◽  
Luis Ayala ◽  
W. Watson Robert
Keyword(s):  
Drilling Fluid ◽  
Operating Conditions ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Lost Circulation ◽  
Pressure Profiles ◽  
Drilling Operations ◽  
Parametric Studies ◽  
Bit Life ◽  
Foam Drilling

The use of foam as a drilling fluid was developed to meet a special set of conditions under which other common drilling fluids had failed. Foam drilling is defined as the process of making boreholes by utilizing foam as the circulating fluid. When compared with conventional drilling, underbalanced or foam drilling has several advantages. These advantages include: avoidance of lost circulation problems, minimizing damage to pay zones, higher penetration rates and bit life. Foams are usually characterized by the quality, the ratio of the volume of gas, and the total foam volume. Obtaining dependable pressure profiles for aerated (gasified) fluids and foam is more difficult than for single phase fluids, since in the former ones the drilling mud contains a gas phase that is entrained within the fluid system. The primary goal of this study is to expand the knowledge-base of the hydrodynamic phenomena that occur in a foam drilling operation. In order to gain a better understanding of foam drilling operations, a hydrodynamic model is developed and run at different operating conditions. For this purpose, the flow of foam through the drilling system is modeled by invoking the basic principles of continuum mechanics and thermodynamics. The model was designed to allow gas and liquid flow at desired volumetric flow rates through the drillstring and annulus. Parametric studies are conducted in order to identify the most influential variables in the hydrodynamic modeling of foam flow. 

Case Study of Identifying and Minimizing Formation Damage in Tight Reservoirs Caused by Drilling Fluids in Abu Dhabi Onshore Operation Using Compatibility Coreflood Studies

2021 ◽  
Author(s):  
Raymond Saragi ◽  
Mohammad Husien ◽  
Dalia Salim Abdullah ◽  
Ryan McLaughlin ◽  
Ian Patey ◽  
...  
Keyword(s):  
Positive Impact ◽  
Abu Dhabi ◽  
Formation Damage ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Hydrocarbon Recovery ◽  
Tight Reservoirs ◽  
Filtrate Loss ◽  
Drilling Muds ◽  
Loss Control

Abstract A study was carried out to examine formation damage mechanisms caused by drilling fluids in tight reservoirs in several onshore oil fields in Abu Dhabi. Three phases of compatibility corefloods were carried out to identify potential to improve hydrocarbon recovery and examine reformulated/alternate drilling muds and treatment fluids. Interpretation was aided by novel Nano-CT quantifications and visualisations. The first phase examined the current drilling muds and showed inconsistent filtrate loss control alongside high levels of permeability alteration. These alterations were caused by retention of drilling mud constituents in the near-wellbore and incomplete clean-up of drilling mud-cakes. Based upon these results, reformulated and alternate drilling muds were examined in Phase 2, and there was a positive impact upon both filtrate loss and permeability, although the Nano-CT quantifications and visualisations showed that drilling mud constituents were still having an impact upon permeability. Candidate treatment fluids were examined in Phase 3, with all having a positive impact and the best performance coming from 15% HCl and an enzyme-based treatment. The interpretative tools showed that these treatments had removed drilling mud-cakes, created wormholes, and bypassed the areas where constituents were retained. The compatibility corefloods on tight reservoir core, alongside high-resolution quantifications and visualisations, therefore identified damaging mechanisms, helped identify potential to improve hydrocarbon recovery, and identify treatment fluid options which could be used in the fields.

Heat Moisture Modified Rice Flours as Additive in Drilling Fluids

2021 ◽  
Vol 80 (1) ◽  
pp. 62-72
Author(s):  
Bunyami Shafie ◽  
Lee Huei Hong ◽  
Phene Neoh Pei Nee ◽  
Fatin Hana Naning ◽  
Tze Jin Wong ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Low Cost ◽  
Health Concern ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Fluid Mixture ◽  
Gas Drilling ◽  
Water Based ◽  
Rice Flours

Drilling mud is a dense, viscous fluid mixture used in oil and gas drilling operations to bring rock cuttings to the earth's surface from the boreholes as well as to lubricate and cool the drill bit. Water-based mud is commonly used due to its relatively inexpensive and easy to dispose of. However, several components and additives in the muds become increasingly cautious and restricted. Starch was introduced as a safe and biodegradable additive into the water-based drilling fluid, in line with an environmental health concern. In this study, the suitability of four local rice flours and their heat moistures derivatives to be incorporated in the formulation of water-based drilling fluid was investigated. They were selected due to their natural amylose contents (waxy, low, intermediate, and high). They were also heat moisture treated to increase their amylose contents. Results showed that the addition of the rice flours into water-based mud significantly reduced the density, viscosity, and filtrate volume. However, the gel strength of the mud was increased. The rice flours, either native or heat moisture treated, could serve as additives to provide a variety of low cost and environmentally friendly drilling fluids to be incorporated and fitted into different drilling activity.

Sagging Prevention for Hematite-Based Invert Emulsion Mud

2021 ◽  
pp. 1-19
Author(s):  
Ashraf Ahmed ◽  
Salem Basfer ◽  
Salaheldin Elkatatny
Keyword(s):  
Laboratory Experiments ◽  
Filter Cake ◽  
Emulsion Stability ◽  
Gel Strength ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
High Pressure High Temperature ◽  
Solids Suspension ◽  
Invert Emulsion ◽  
Drilling Cost

Abstract The solids sagging in high-pressure high-temperature (HP/HT) reservoirs is a common challenge associated with hematite drilling fluids. This study provides a solution to hematite sagging in invert emulsion mud for HP/HT wells which involves the combination of Micromax (Mn3O4) with hematite. The particles of both weighting agents were characterized to address their mineralogical features. A Field formulation of the mud was used over a range of Micromax/hematite ratios (0/100, 20/80, and 30/70%) in laboratory experiments to address the sag performance and determine the optimal combination ratio. Then, density, emulsion stability, rheology, viscoelasticity, and filtration performance for the formulated mud were addressed. The tests were conditioned to 500 psi and 350 °F. The acquired results of sag tests indicated that incorporation of 30% Micromax solved the hematite sagging issue and brought the sag tendency within the recommended safe range. An insignificant reduction in mud density was observed upon the inclusion of Micromax, while the emulsion stability was obviously improved from 551 to 614 volts with the 30% Micromax mixture. The recommended 30/70% combination had almost no effect on plastic viscosity and yield point since they were increased by one unit, but the gel strength was improved resulting in flat rheology and better solids suspension capacity. The filtration behavior of the formulation with 30% Micromax was enhanced compared to pure hematite as it resulted in 10 and 14% reduction of the filtrate volume and filter-cake thickness, respectively. This study contributes to improve and economize the drilling cost and time by formulating a stabilized and distinguished-performance drilling mud using combined weighting agents at HP/HT.

scholarly journals Cellulose Nanostructure-Based Biodegradable Nanocomposite Foams: A Brief Overview on the Recent Advancements and Perspectives

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1270 ◽  
Author(s):  
Motloung ◽  
Ojijo ◽  
Bandyopadhyay ◽  
Ray
Keyword(s):  
Fossil Fuel ◽  
Environmentally Friendly ◽  
Morphological Properties ◽  
Polymer Foams ◽  
Crystallisation Kinetics ◽  
Thermal Insulating ◽  
Nanocomposite Foams ◽  
And Performance ◽  
Insulating Properties ◽  
Cellulose Nanostructure

The interest in designing new environmentally friendly materials has led to the development of biodegradable foams as a potential substitute to most currently used fossil fuel–derived polymer foams. Despite the possibility of developing biodegradable and environmentally friendly polymer foams, the challenge of foaming biopolymers still persists as they have very low melt strength and viscosity as well as low crystallisation kinetics. Studies have shown that the incorporation of cellulose nanostructure (CN) particles into biopolymers can enhance the foamability of these materials. In addition, the final properties and performance of the foamed products can be improved with the addition of these nanoparticles. They not only aid in foamability but also act as nucleating agents by controlling the morphological properties of the foamed material. Here, we provide a critical and accessible overview of the influence of CN particles on the properties of biodegradable foams; in particular, their rheological, thermal, mechanical, and flammability and thermal insulating properties and biodegradability.

Impact of Isomer Design on Physicochemical Properties and Performance in High-Efficiency All-Polymer Solar Cells

2020 ◽  
Vol 53 (20) ◽  
pp. 9026-9033
Author(s):  
Hang Yang ◽  
Hongyu Fan ◽  
Zhen Wang ◽  
Hongping Yan ◽  
Yingying Dong ◽  
...  
Keyword(s):  
Solar Cells ◽  
Physicochemical Properties ◽  
High Efficiency ◽  
Polymer Solar Cells ◽  
And Performance
Sign in / Sign up

Export Citation Format

Share Document