A New Mathematical Model of Tight Formation for Productivity Transient Analysis with Additional Gas Driving

2021 ◽  
Author(s):  
Xiaoliang Zhao ◽  
Jiali Zhang ◽  
Xinwei Liao
Keyword(s):  
Transient Analysis ◽  
Phase Distribution ◽  
Gas Injection ◽  
Stress Sensitivity ◽  
Carbonate Reservoir ◽  
Low Permeability ◽  
Analysis Model ◽  
Damage Coefficient ◽  
Single Well ◽  
Permeability Damage

Abstract During the gas injection development of low-permeability carbonate reservoirs, due to the complexity of the reservoir and the complexity of the fluid phases, the current productivity evaluation methods are no longer applicable. In this paper, considering factors such as fracture characteristics, stress sensitivity, and phase distribution, a low-permeability carbonate reservoir gas injection development productivity transient analysis model is established. The results of the study show that the larger the value of permeability damage coefficient, the stronger the curve of the production curve will bend toward the pressure axis. This is because the larger the value of permeability damage coefficient, the more severe the stress sensitivity of the formation is, which shows that rock deformation has an important impact on production. When two phases appear at the bottom of the well, the seepage resistance increases due to the two-phase flow, which in turn causes the productivity of a single well to rapidly decrease. With the decrease of bottom hole pressure, this resistance will increase significantly and the productivity of a single well will decline rapidly.

Pressure Transient Analysis for Fracture-Cavity Carbonate Reservoirs with Large Scale Fractures-Caves in Series Connection

2021 ◽  
pp. 1-20
Author(s):  
Cuiqiao Xing ◽  
Hongjun Yin ◽  
Hongfei Yuan ◽  
Jing Fu ◽  
Guohan Xu
Keyword(s):  
Transient Analysis ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Test Model ◽  
Well Test ◽  
Analysis Model ◽  
Pressure Transient Analysis ◽  
Linear Flow ◽  
Pressure Transient ◽  
Well Test Model

Abstract Fractured vuggy carbonate reservoirs are highly heterogeneous and non-continuous, and contains not only erosion pores and fractures but also the vugs. Unfortunately, the current well test model cannot be used to analyze fractured-vuggy carbonate reservoirs, due to the limitations of actual geological characteristics. To solve the above-mentioned problem, a pressure transient analysis model for fracture-cavity carbonate reservoir with radial composite reservoir that the series multi-sacle fractures and caves exist and dual-porosity medium (fracture and erosion pore) is established in this paper, which is suitable for fractured vuggy reservoirs. Laplace transformation is used to alter and solve the mathematical model. The main fractures' linear flow and the radial flow of caves drainage area are solved by coupling. The pressure-transient curves of the bottomhole have been obtained with the numerical inversion algorithms. The typical curves for well test model which has been established are drawn, and flow periods are analyzed. The sensitivity analysis for different parameters is analyzed. The variation characteristic of typical curves is by the theoretical analysis. With the increasing of fracture length, the time of linear flow is increased. While the cave radius is the bigger, the convex and concave of the curve is the larger. As a field example, actual test data is analyzed by the established model. An efficient well test analysis model is developed, and it can be used to interpret the actual pressure data for fracture-cavity carbonate reservoirs.

scholarly journals Stress sensitivity evaluation of ultra-low permeability sandstone reservoir and its influence on oilfield development

2021 ◽  
Vol 292 ◽  
pp. 01027
Author(s):  
Xin Bai ◽  
Chunfen Guo ◽  
Xingli Yang ◽  
Xi Liu
Keyword(s):  
Water Injection ◽  
Confining Pressure ◽  
Stress Sensitivity ◽  
Low Permeability ◽  
Oil Well ◽  
Pressure Stage ◽  
Bottom Hole ◽  
Sensitivity Evaluation ◽  
Permeability Damage ◽  
Sandstone Reservoir

Luohe ultra-low permeability sandstone reservoir is a hot block in Yanchang oilfield, which is a potential point for increasing production and reservoir. In view of the current situation that there is no unified stress sensitivity evaluation standard for ultra-low permeability sandstone in the study area, taking the ultra-low permeability sandstone in Luohe district as the research object, the stress sensitivity evaluation of ultra-low permeability sandstone is carried out by using experimental analysis as the main means. The results show that it is more accurate to evaluate porosity by using pore stress sensitivity coefficient instead of pore compressibility coefficient. With the increase of net overburden pressure, the porosity stress sensitivity decreases gradually; the permeability stress sensitivity is evaluated by variable confining pressure. With the increase of confining pressure, the permeability damage decreases. With the decrease of confining pressure, the permeability damage increases, but it can not recover to the original value, so the permeability damage is irreversible; in the low bottom hole pressure stage, stress sensitivity has a greater impact on oil well productivity, while in the high bottom hole pressure stage, stress sensitivity has a smaller impact on oil well productivity; advanced water injection can reduce the adverse effect of stress sensitivity on the development of ultra-low permeability sandstone and maximize the economic benefits. The research results clarify the method of stress sensitivity evaluation, and provide guidance for efficient water injection in the next step.

The Mechanism of Flue Gas Injection for Enhanced Light Oil Recovery

2004 ◽  
Vol 126 (2) ◽  
pp. 119-124 ◽  
Author(s):  
O. S. Shokoya ◽  
S. A. (Raj) Mehta ◽  
R. G. Moore ◽  
B. B. Maini ◽  
M. Pooladi-Darvish ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Flue Gas ◽  
Gas Injection ◽  
Cost Effective ◽  
Air Injection ◽  
Oil Reservoirs ◽  
Flue Gases ◽  
Low Permeability ◽  
Light Oil ◽  
Light Oil Reservoirs

Flue gas injection into light oil reservoirs could be a cost-effective gas displacement method for enhanced oil recovery, especially in low porosity and low permeability reservoirs. The flue gas could be generated in situ as obtained from the spontaneous ignition of oil when air is injected into a high temperature reservoir, or injected directly into the reservoir from some surface source. When operating at high pressures commonly found in deep light oil reservoirs, the flue gas may become miscible or near–miscible with the reservoir oil, thereby displacing it more efficiently than an immiscible gas flood. Some successful high pressure air injection (HPAI) projects have been reported in low permeability and low porosity light oil reservoirs. Spontaneous oil ignition was reported in some of these projects, at least from laboratory experiments; however, the mechanism by which the generated flue gas displaces the oil has not been discussed in clear terms in the literature. An experimental investigation was carried out to study the mechanism by which flue gases displace light oil at a reservoir temperature of 116°C and typical reservoir pressures ranging from 27.63 MPa to 46.06 MPa. The results showed that the flue gases displaced the oil in a forward contacting process resembling a combined vaporizing and condensing multi-contact gas drive mechanism. The flue gases also became near-miscible with the oil at elevated pressures, an indication that high pressure flue gas (or air) injection is a cost-effective process for enhanced recovery of light oils, compared to rich gas or water injection, with the potential of sequestering carbon dioxide, a greenhouse gas.

Sign in / Sign up

Export Citation Format

Share Document