Effect of Dynamic Contact Angle on Spontaneous Capillary-Liquid-Liquid Imbibition by Molecular Kinetic Theory

SPE Journal ◽  
2021 ◽  
pp. 1-16
Author(s):  
Weibing Tian ◽  
Keliu Wu ◽  
Zhangxin Chen ◽  
Lingbin Lai ◽  
Yanling Gao ◽  
...  

Summary Imbibition is one of the most common physical phenomena in nature, and it plays an important role in enhanced oil recovery, hydrology, and environmental engineering. The imbibition in a capillary is one of the fluid transports in porous media, and the effect of a dynamic contact angle that changes with the imbibition rate on liquid-liquid imbibition is not clear. In this paper, the molecular kinetic theory (MKT) is used to study the effect of a dynamic contact angle on spontaneous capillary-liquid-liquid imbibition at a micrometer scale. The results show that: Using a scaling time, the effects of various forces in different imbibition systems can be compared, the influence of a dynamic contact angle on imbibition can be characterized by a frictional effect of the three-phase contact line, and the proposed model considering the effect of a dynamic contact angle is better than the model neglecting the effect of a dynamic contact angle. As the displacing phase viscosity increases, the influence of a dynamic contact angle on imbibition strengthens, which is attributed to a decrease in the viscous effect and an increase in the frictional effect during the imbibition process; as the displaced phase viscosity increases, the influence of a dynamic contact angle on imbibition weakens, which is attributed to an increase in the viscous effect and a decrease in the frictional effect during the imbibition process. As the interfacial tension increases, the frictional effect increases, with the result that the effect of a dynamic contact angle on imbibition increases. As the capillary becomes more hydrophilic, the effect of a dynamic contact angle on imbibition becomes stronger because of a decreasing viscous effect and an increasing frictional effect. As the capillary length increases, the viscous effect increases, whereas the frictional effect decreases, leading to a decrease in the dynamic contact angle effect. As the capillary radius increases, the frictional force decreases, whereas its proportion in total resistance or the frictional effect increases, resulting in an increase in the effect of a dynamic contact angle. This work sheds light on the effect of a dynamic contact angle on capillary-liquid-liquid imbibition, including displacing phase viscosity, displaced phase viscosity, interfacial tension, capillary wettability, length, and radius. It will provide new insights into manipulating a capillary imbibition process and provide a fundamental theory for enhanced oil recovery by imbibition in conventional or unconventional reservoirs. Supplementary materials are available in support of this paper and have been published online under Supplementary Data at https://doi.org/10.2118/205490-PA. SPE is not responsible for the content or functionality of supplementary materials supplied by the authors.

2018 ◽  
Author(s):  
M. Elsharafi ◽  
K. Vidal ◽  
R. Thomas

Contact angle measurements are important to determine surface and interfacial tension between solids and fluids. A ‘water-wet’ condition on the rock face is necessary in order to extract oil. In this research, the objectives are to determine the wettability (water-wet or oil-wet), analyze how different brine concentrations will affect the wettability, and study the effect of the temperature on the dynamic contact angle measurements. This will be carried out by using the Cahn Dynamic Contact Angle. Analyzer DCA 315 to measure the contact angle between different fluids such as surfactant, alkaline, and mineral oil. This instrument is also used to measure the surface properties such as surface tension, contact angle, and interfacial tension of solid and liquid samples by using the Wilhelmy technique. The work used different surfactant and oil mixed with different alkaline concentrations. Varying alkaline concentrations from 20ml to 1ml were used, whilst keeping the surfactant concentration constant at 50ml.. It was observed that contact angle measurements and surface tension increase with increased alkaline concentrations. Therefore, we can deduce that they are directly proportional. We noticed that changing certain values on the software affected our results. It was found that after calculating the density and inputting it into the CAHN software, more accurate readings for the surface tension were obtained. We anticipate that the surfactant and alkaline can change the surface tension of the solid surface. In our research, surfactant is desirable as it maintains a high surface tension even when alkaline percentage is increased.


2021 ◽  
Author(s):  
Xu-Guang Song ◽  
Ming-Wei Zhao ◽  
Cai-Li Dai ◽  
Xin-Ke Wang ◽  
Wen-Jiao Lv

AbstractThe ultra-low permeability reservoir is regarded as an important energy source for oil and gas resource development and is attracting more and more attention. In this work, the active silica nanofluids were prepared by modified active silica nanoparticles and surfactant BSSB-12. The dispersion stability tests showed that the hydraulic radius of nanofluids was 58.59 nm and the zeta potential was − 48.39 mV. The active nanofluids can simultaneously regulate liquid–liquid interface and solid–liquid interface. The nanofluids can reduce the oil/water interfacial tension (IFT) from 23.5 to 6.7 mN/m, and the oil/water/solid contact angle was altered from 42° to 145°. The spontaneous imbibition tests showed that the oil recovery of 0.1 wt% active nanofluids was 20.5% and 8.5% higher than that of 3 wt% NaCl solution and 0.1 wt% BSSB-12 solution. Finally, the effects of nanofluids on dynamic contact angle, dynamic interfacial tension and moduli were studied from the adsorption behavior of nanofluids at solid–liquid and liquid–liquid interface. The oil detaching and transporting are completed by synergistic effect of wettability alteration and interfacial tension reduction. The findings of this study can help in better understanding of active nanofluids for EOR in ultra-low permeability reservoirs.


Author(s):  
O.N Goncharova ◽  
◽  
I.V. Marchuk ◽  
A.V. Zakurdaeva ◽  
◽  
...  

2013 ◽  
Vol 333-335 ◽  
pp. 2004-2009
Author(s):  
Lin Ling Jiang ◽  
Wei Mo ◽  
Xiao Jing Yang ◽  
Tian Li Xue ◽  
Shao Jian Ma

To better understand the sedimentation processes of bentonite, the sedimentation characteristic of bentonite suspension was studied by using the sedimentation analysis module of Dynamic Contact Angle Meter and Tensiometer. The results indicated that sedimentation characteristics of bentonite suspension were affected by the concentration and pH values of the suspension together with the dosage of dispersants. The natural sedimentation rates of bentonite suspension declined firstly with prolonging the sedimentation time and soon stabilized after about 50s. The sedimentation weight of particles hardly changed when the concentration ranged from 0.5% to 5.0%, while it increased significantly when ranged from 5.0% to 10.0%. The sedimentation weight and rate were relatively bigger at 4.4, 11.8 than that of 6.0, 7.9, and the maximum values appeared at pH11.8. Adding sodium pyrophosphate could improve the dispersibility of bentonite suspension.


Sign in / Sign up

Export Citation Format

Share Document