Analysis of the Performance of Various Well Liner Completion Strategies in Surmont

2021 ◽  
Author(s):  
Kousha Gohari ◽  
Julian Ortiz ◽  
Kristian Nespor ◽  
Javier Sanchez ◽  
Andres Betancur ◽  
...  
Keyword(s):  
Liquid Pool ◽  
The Self ◽  
Production Performance ◽  
Reservoir Quality ◽  
Steam Assisted Gravity Drainage ◽  
Flow Restriction ◽  
Controlling System ◽  
Flow Control Devices ◽  
The Impact ◽  
Better Than

Abstract ConocoPhillips operates Surmont, which is the first Steam-Assisted Gravity Drainage (SAGD) project to implement Flow Control Devices (FCDs) in producer wells. This study was conducted to evaluate the production performance of different liner completion strategies. The analysis compared well pairs completed with slotted liners (SL) to producers completed with FCDs, both liner deployed (LD-FCD) and tubing deployed (TD-FCD), and investigated the impact of FCDs in injectors. An extensive analysis was conducted using available production and temperature data along the wells. The wells were completed using various fixed-resistance FCD settings, while some wells were completed using variable setting designs. As time went on, several of the slotted liner producer wells were retrofitted with tubing-deployed FCD completions. One of the key objectives of the study was to determine the success rate of tubing-deployed FCDs and their performance relative to liner-deployed FCD wells. Another objective was to evaluate the impact of retrofitting slotted liner SAGD injectors with tubing-deployed FCD completions. In this study, a grading system was established based on the reservoir quality along the well for both injector and producer. For similar graded well pairs, LD-FCDs had better production performance than TD-FCDs. Considering similar graded reservoir quality, FCDs consistently performed better than slotted liners, in both conformance and production acceleration. The production analysis showed that the FCD flow restriction was a major controller of the conformance, but considering the self-choking phenomenon of the reservoir, most FCDs can perform positively in different circumstances. In this study, the self-choking effect of the liquid pool is discussed and explained for different reservoirs and variable subcool. Generally, if erosion is not a factor, FCDs can create a more controlling system than liquid-pool dominant systems. In these cases, both conformance and production acceleration is enhanced if operators yield lower subcools and greater draw-down pressures.

Liner Deployed Flow Control Devices in SAGD Infill Producers

2021 ◽  
Author(s):  
Michael Hardcastle ◽  
Ryan Holmes ◽  
Frank Abbott ◽  
Jesse Stevenson ◽  
Aubrey Tuttle
Keyword(s):  
Flow Control ◽  
Oil And Gas ◽  
Distributed Temperature Sensing ◽  
Steam Assisted Gravity Drainage ◽  
Well Production ◽  
Flow Control Devices ◽  
Control Devices ◽  
The Impact ◽  
Mobility Variable

Abstract Connacher Oil and Gas has deployed Flow Control Devices (FCDs)on an infill well liner as part of a Steam Assisted Gravity Drainage (SAGD) exploitation strategy. Infill wells are horizontal wells drilled in between offsetting SAGD well pairs in order to access bypassed pay and accelerate recovery. These wells can have huge variability in productivity, based on several factors: variable initial temperature due to variable steam chamber development and initial mobility variable injectivity from day one limiting steam circulation and stimulation significant hot spots during production that limit drawdown of the well and oil productivity FCDs have shown great value in several SAGD schemes and are becoming common throughout SAGD applications to manage similar challenges in SAGD pairs, but their application in infill wells is less prevalent and presents a novel challenge to design and evaluate performance. This case study will examine the theory, operation, and early field results of this field trial. Density-based FCDs designed for thermal operations were selected to minimize the impact of viscous fluids commonly encountered early in cold infill well production. The design also limited steam outflow during the stimulation phase, where steam is injected in order to initiate production of the well. Distributed Temperature Sensing (DTS) data, pressures and rates are utilized to analyze the impact of the FCDs towards conformance of the well in the early life. The value of FCDs has led to further piloting of this technology in a second group of nine infill wells, where further value is to be extracted using slimmer wellbores.

Field Optimization Via Data Approach: A Case Study of Data Mining for Tight Gas Flowback Evaluations

2021 ◽  
Author(s):  
Yuan Liu ◽  
Bin Li ◽  
Hongjie Zhang ◽  
Fan Yang ◽  
Guan Wang ◽  
...  
Keyword(s):  
Data Mining ◽  
Production Performance ◽  
Reservoir Quality ◽  
Tight Gas ◽  
Well Performance ◽  
Gas Field ◽  
Field Development ◽  
Field Level ◽  
Depth Analysis ◽  
The Impact

Abstract The economics of tight gas fields highly depend on the consistency between expected production and the actual well performance. A mismatch between the reservoir quality and the well production often leads to a review of the individual well. However, such mismatch may vary from case to case, and it is hard to perform a field-level analysis based on individual well reviews. We introduce a new method based on data mining to assist the field-level diagnosis. LX gas field is located the in eastern Ordos basin. Compared to the main gas field in the center of the basin, LX field is less predictable in well performance. This predictability issue hinders field development in LX field because the field economics are substantially jeopardized by the inconsistency between the reservoir quality and the production performance. The traditional workflow to understand this issue at the field level is to review the details of a large number of individual wells in the area. This is typically an intense task, and too much detail from multiple disciplines may hide the true pattern of the field behavior. To resolve this issue, we applied data mining in our field development diagnosis workflow. Our new workflow in LX area started with the existing field datasheet, including logging summaries, completion treatment reports, and flowback testing datasheets. With the data extracted from these different sources, we visualized the consolidated information in various plots and graphs based on regression analysis, which revealed the relation between flowback ratio and the production, the flowback rate consistency from the different service suppliers, and the impact of water productions. The data mining approach helped to generate new understandings in LX gas field. With the in-depth analysis of the flowback data together with reservoir properties and operation parameters, the key problems in the field were identified for further development optimization, and the field economics can be significantly improved. The diagnosis method can be easily adapted and applied to any field with similar problems, and data mining can be useful for almost all large-scale field development optimizations.

Performance Analysis of Infill Wells Adjacent to SAGD Well Pair: Non-Condensable Gas NCG Breakthrough

2021 ◽  
Author(s):  
Mazda Irani ◽  
Aubrey Tuttle ◽  
Jesse Stevenson
Keyword(s):  
Hot Spot ◽  
Pressure Effects ◽  
Productivity Index ◽  
First Year ◽  
Steam Chamber ◽  
Steam Assisted Gravity Drainage ◽  
Flow Control Devices ◽  
Fit For Purpose ◽  
The Common ◽  
The Impact

Summary Late in the life of the Steam Assisted Gravity Drainage (SAGD) process, it has become common practice to drill a single, horizontal infill well (called a “Wedge Well™” by some) in the oil bank located between two mature SAGD well pairs to produce the bitumen that has been heated and mobilized but is unable to be effectively drained by gravity given the largely lateral location relative to that of the SAGD producers. Since this oil bank is surrounded by the large, depleted steam chamber created by the existing well pairs, it requires little heat to mobilize bitumen. One of the challenges, however, in producing infill wells is that non-uniform drainage and local hot spots can be readily created in the first year of their operation, that in many cases require completion retrofits, such as with Flow Control Devices (FCDs), to improve the drainage profile. Installation of FCDs in these wells is quite challenging since the dynamics of the infill wells is changing with time and there is limited time to achieve conformance. To maintain pressure in SAGD chambers the common practice is to inject non-condensable gas (NCG). NCGs, such as methane, which is most common, do not condense in the steam chamber. Some of these NCG can short-cut into the infill through the existing hot-spot. The main reason is that the hot sections of infills are locations that are closer to the SAGD steam chamber, and due to steam condensate encroachment and higher mobility create a pathway for NCG breakthrough. FCDs are designed to promote a more uniform flux distribution along the producer, and exposure to NCG can change the impact of the FCDs. The true hot-spot temperature after NCG injection is decreasing and this can be mistaken as FCD efficiency and steam blocking. In reality, this temperature reduction is due to partial pressure effects associated with NCG encroachment. In this study, a new thermodynamic model is created to explain the NCG encroachment into infill wells, and a new temperature profile along the producer as a function of NCG breakthrough is calculated. The purpose of this work is to create a productivity index (PI) relationship that is fit for purpose for infill wells adjacent to SAGD well-pairs with NCG breakthrough that can primarily be used for analysis and optimization of SAGD FCD completions. This model can also be used to evaluate FCD performance in infill wells pre- and post- NCG breakthrough.

Self-Compassion and Quality of Life in Adults Who Stutter

2020 ◽  
Vol 29 (4) ◽  
pp. 2097-2108
Author(s):  
Robyn L. Croft ◽  
Courtney T. Byrd
Keyword(s):  
Quality Of Life ◽  
Social Connectedness ◽  
The Self ◽  
Future Research ◽  
Self Compassion ◽  
Adults Who Stutter ◽  
And Gender ◽  
Relationship Of ◽  
The Impact

Purpose The purpose of this study was to identify levels of self-compassion in adults who do and do not stutter and to determine whether self-compassion predicts the impact of stuttering on quality of life in adults who stutter. Method Participants included 140 adults who do and do not stutter matched for age and gender. All participants completed the Self-Compassion Scale. Adults who stutter also completed the Overall Assessment of the Speaker's Experience of Stuttering. Data were analyzed for self-compassion differences between and within adults who do and do not stutter and to predict self-compassion on quality of life in adults who stutter. Results Adults who do and do not stutter exhibited no significant differences in total self-compassion, regardless of participant gender. A simple linear regression of the total self-compassion score and total Overall Assessment of the Speaker's Experience of Stuttering score showed a significant, negative linear relationship of self-compassion predicting the impact of stuttering on quality of life. Conclusions Data suggest that higher levels of self-kindness, mindfulness, and social connectedness (i.e., self-compassion) are related to reduced negative reactions to stuttering, an increased participation in daily communication situations, and an improved overall quality of life. Future research should replicate current findings and identify moderators of the self-compassion–quality of life relationship.

Effect of Parental Modernity on Rejection Sensitivity and Self-Esteem of Adolescents

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
Ritu ◽  
Madhu Anand
Keyword(s):  
Social Development ◽  
Rejection Sensitivity ◽  
Self Esteem ◽  
The Self ◽  
Negatively Associated ◽  
Individual Modernity ◽  
The Impact ◽  
The Relationship

Parental Modernity is an important aspect for the psycho-social development of the child. The present study aims to study the effect of parental modernity on rejection sensitivity and self-esteem of adolescents and the relationship between rejection sensitivity and self-esteem. The research is carried out on a sample of 240 parents (including 120 fathers and 120 mothers) and their 120 children. For observing the impact of modernity of parents on their children, Individual Modernity Scale was used and administered on father and mother. Rejection Sensitivity Questionnaire and Self-Esteem Inventory were used to measure the rejection sensitivity and self-esteem of children (age ranges from 14 to 19 years). The results suggest that parental modernity has an effect on the rejection sensitivity and personally perceived self of the self – esteem of adolescents. Furthermore, the rejection sensitivity has been found negatively associated with self-esteem.

Fluxus and the Absurd (1961–62)

2017 ◽  
Author(s):  
Benjamin R. Levy
Keyword(s):  
Second Life ◽  
The Self ◽  
Major Work ◽  
The Future ◽  
To Come ◽  
The Impact

After John Cage’s 1958 Darmstadt lectures, many European composers developed an interest in absurdity and artistic provocation. Although Ligeti’s fascination with Cage and his association with the Fluxus group was brief, the impact it had on his composition was palpable and lasting. A set of conceptual works, The Future of Music, Trois Bagatelles, and Poème symphonique for one hundred metronomes, fall clearly into the Fluxus model, even as the last has taken on a second life as a serious work. This spirit, however, can also be seen in the self-satire of Fragment and the drama and irony of Volumina, Aventures, and Nouvelles Aventures. The sketches for Aventures not only show the composer channeling this humor into a major work but also prove to be a fascinating repository of ideas that Ligeti would reuse in the years to come.

scholarly journals Advertising Media Impact in Consumer Buying Behavior

2019 ◽  
Vol 8 ◽  
pp. 54-56
Author(s):  
Ashmita Dahal Chhetri
Keyword(s):  
Consumer Behavior ◽  
Young Male ◽  
Electronic Media ◽  
Buying Behavior ◽  
Media Impact ◽  
High Degree ◽  
The Impact ◽  
Buying Behaviors ◽  
The Relationship ◽  
Better Than

Advertisements have been used for many years to influence the buying behaviors of the consumers. Advertisements are helpful in creating the awareness and perception among the customers of a product. This particular research was conducted on the 100 young male and female who use different brands of product to check the influence of advertisement on their buying behavior while creating the awareness and building the perceptions. Correlation, regression and other statistical tools were used to identify the relationship between these variables. The results revealed that the relationship between media and consumer behavior is positive. The adve1tising impact on sales and there is positive and high degree relationship between advertising and consumer behavior. The impact on advertising of a product of electronic media is better than non-electronic media.

scholarly journals The “Christology” of Bely the Anthroposophist: Andrei Bely, Rudolf Steiner, and the Apostle Paul

Religions ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 519
Author(s):  
Monika Spivak
Keyword(s):  
The Self ◽  
Apostle Paul ◽  
Rudolf Steiner ◽  
2 Corinthians ◽  
History Of ◽  
The Impact

The article focuses on R. Steiner’s perception of the Gospels and the impact of that view on Bely’s works. The latter had always valued Steiner’s lectures on Christ and the Fifth Gospel, the “Anthroposophic” (relating to the philosophy of human genesis, existence, and outcome) Gospel, the knowledge of which had been received in a visionary way. In addition, Bely was an esoteric follower of Steiner and often quoted from Apostle Paul’s 2 Corinthians, “Ye are our epistle written in our hearts, known and read of all men”. The citation occurs in Bely’s philosophical works (The History of the Formation of the Self-Conscious Soul, “Crisis of Consciousness”), autobiographic prose (Reminiscences of Steiner), the essay “Why I Became a Symbolist…”, and letters (to Ivanov-Razumnik and Fedor Gladkov). Bely’s own anthroposophic and esoteric ideas relating to the gospel sayings are also examined. The aim of the research is to show through the example of one quotation the specifics of Bely the Anthroposophist’s perception of Christian texts in general. This provides a methodological meaning for understanding other Biblical quotations and images in the works of Bely because anthroposophical Christology is also the key to their deciphering.

Sign in / Sign up

Export Citation Format

Share Document