Rock Typing and Novel Approach for Fluid-Saturation Distribution in Tilted Water/Oil Contact Reservoirs

2020 ◽  
Author(s):  
Reinaldo Jose Angulo Yznaga ◽  
Kresimir Vican ◽  
Venkat Jambunathan ◽  
Ehab Najm ◽  
Nacer Guergueb ◽  
...  
Keyword(s):  
Fluid Saturation ◽  
Rock Typing ◽  
Novel Approach ◽  
Saturation Distribution

ROCK TYPING AND NOVEL APPROACH FOR FLUID-SATURATION DISTRIBUTION IN TILTED WATER/OIL CONTACT RESERVOIRS

2021 ◽  
Author(s):  
Kresimir Vican ◽  
◽  
Venkat Jambunathan ◽  
Ehab Negm ◽  
Nacer Guergueb ◽  
...  
Keyword(s):  
Capillary Pressure ◽  
New Method ◽  
Reservoir Rock ◽  
Core Analysis ◽  
Height Functions ◽  
Saturation Properties ◽  
Rock Typing ◽  
Novel Approach ◽  
Complex Fluid ◽  
Saturation Distribution

Rock typing in carbonate reservoirs has always represented a difficult challenge due to rock heterogeneity. When interpreting electrical logs, the thick carbonate formation can leave an impression of a homogenous environment; however, looking at core analysis and mercury injection capillary pressure (MICP) data, reservoir heterogeneity can be determined. This complexity of the formation characterization presents challenges in reservoirs that contain tilted water/oil contact (WOC). Tilted WOC discovers hydrocarbon saturation below the free-water level, and different events during geological time can contribute to this specific fluid accumulation. Knowledge of the fluid distribution is needed to understand the mechanisms of oil entrapment, oil volumetrics, and potential recovery mechanisms involved in reservoirs under this wettability and WOC conditions. This case study will describe the workflow used to characterize and model an atypical regime like non-water wet formations in reservoirs with tilted WOC. In this study, a combination of electrical logs, core analysis (lithofacies, poro-perm, MICP), and customized workflow was used to characterize, classify, and map facies. Capillary pressure information and formation tester data were integrated and compiled for each facies. Moving forward, a new method was developed to model saturation height functions representing non-water wet formations and tilted WOC phenomena. Fluid and saturation properties are estimated and assigned to each reservoir point and after reservoir rock types (RRT) were defined. This method has been validated by applying the new approach to actual well data. The drainage capillary pressure (Pc) lab data in the reservoir intervals with established conventional WOC complemented interpretation results derived from acquired logs; however, for the reservoirs zones with identified tilted WOC, correlation and matching Pc lab data with logs was not possible. The new method provides saturation properties in formations with complex fluid-rock interactions and phenomena. This work introduces a novel approach to estimate saturation height functions and saturation distribution for reservoirs with complex fluid-rock interaction and distribution, such as non-water wet formations in tilted WOC conditions.

Digital Rock Typing DRT Algorithm Formulation with Optimal Supervised Semantic Segmentation

2022 ◽  
Author(s):  
Omar Alfarisi ◽  
Djamel Ouzzane ◽  
Mohamed Sassi ◽  
TieJun Zhang
Keyword(s):  
Carbonate Rock ◽  
Chemical Properties ◽  
Rock Physics ◽  
Semantic Segmentation ◽  
Rock Properties ◽  
Digital Rock Physics ◽  
Digital Rock ◽  
Rock Types ◽  
Fluid Saturation ◽  
Rock Typing

<p><a></a>Each grid block in a 3D geological model requires a rock type that represents all physical and chemical properties of that block. The properties that classify rock types are lithology, permeability, and capillary pressure. Scientists and engineers determined these properties using conventional laboratory measurements, which embedded destructive methods to the sample or altered some of its properties (i.e., wettability, permeability, and porosity) because the measurements process includes sample crushing, fluid flow, or fluid saturation. Lately, Digital Rock Physics (DRT) has emerged to quantify these properties from micro-Computerized Tomography (uCT) and Magnetic Resonance Imaging (MRI) images. However, the literature did not attempt rock typing in a wholly digital context. We propose performing Digital Rock Typing (DRT) by: (1) integrating the latest DRP advances in a novel process that honors digital rock properties determination, while; (2) digitalizing the latest rock typing approaches in carbonate, and (3) introducing a novel carbonate rock typing process that utilizes computer vision capabilities to provide more insight about the heterogeneous carbonate rock texture.<br></p>

Beyond Volumetrics: Unconventional Petrophysics for Efficient Resource Appraisal (Example from the Khazzan Field, Sultanate of Oman)

2015 ◽  
Author(s):  
David R. Spain ◽  
German D. Merletti ◽  
William Dawson
Keyword(s):  
Gas Permeability ◽  
Stress Profile ◽  
Tight Gas ◽  
Well Performance ◽  
Flow Properties ◽  
Dynamic Flow ◽  
Stress Regime ◽  
Flow Units ◽  
Fluid Saturation ◽  
Rock Typing

Abstract The Middle East region holds substantial resources of unconventional tight gas and shale gas. The efficient extraction of these resources requires significant technology and expertise across numerous disciplines, including reservoir description and geomechanical characterization, hydraulic fracture modelling and design, advanced numerical simulation capabilities, sensor and surveillance technologies, and tightly integrated workflows. The effective application of these integrated subsurface and completion workflows leads to improved capital efficiency and well performance through increased well potential, increased ultimate recovery, and reduced costs. Key elements include dynamic rock typing to highlight potential flow units that will maximize gas deliverability, geomechanical modelling to provide a calibrated stress profile, and an integrated model that demonstrates the importance of understanding both dynamic flow properties and geomechanical response in complex tectonic environments. Dynamic rock typing focuses on using both depositional and petrophysical properties including rock type, porosity, and effective gas permeability at reservoir conditions to divide the reservoir into flow units in the context of their saturation history. The geomechanical profiling generates a tectonics-corrected minimum horizontal stress (SHmin) and the net confining stress (NCS). The rock-log-test calibration requires the evaluation and integration of subsurface fracture tests, including After-Closure Analysis (ACA), Data Fracs and Micro Fracs. All three involve different injection volumes and sampled reservoir volumes. Tight gas petrophysical studies must go “beyond volumetrics”, and should consider not only the static (storage) and dynamic (flow) properties within the context of the petroleum system and evolution of the current day pore geometry and fluid saturation distribution, but also the geomechanical stress regime and its implications for efficient completion optimization. Alternative interpretations test the range of uncertainty and are useful in designing field trials and surveillance strategies to reduce the subsurface uncertainty and to mitigate development risks.

Digital Rock Typing DRT Algorithm Formulation with Optimal Supervised Semantic Segmentation

2022 ◽  
Author(s):  
Omar Alfarisi ◽  
Djamel Ouzzane ◽  
Mohamed Sassi ◽  
TieJun Zhang
Keyword(s):  
Carbonate Rock ◽  
Chemical Properties ◽  
Rock Physics ◽  
Semantic Segmentation ◽  
Rock Properties ◽  
Digital Rock Physics ◽  
Digital Rock ◽  
Rock Types ◽  
Fluid Saturation ◽  
Rock Typing

<p><a></a>Each grid block in a 3D geological model requires a rock type that represents all physical and chemical properties of that block. The properties that classify rock types are lithology, permeability, and capillary pressure. Scientists and engineers determined these properties using conventional laboratory measurements, which embedded destructive methods to the sample or altered some of its properties (i.e., wettability, permeability, and porosity) because the measurements process includes sample crushing, fluid flow, or fluid saturation. Lately, Digital Rock Physics (DRT) has emerged to quantify these properties from micro-Computerized Tomography (uCT) and Magnetic Resonance Imaging (MRI) images. However, the literature did not attempt rock typing in a wholly digital context. We propose performing Digital Rock Typing (DRT) by: (1) integrating the latest DRP advances in a novel process that honors digital rock properties determination, while; (2) digitalizing the latest rock typing approaches in carbonate, and (3) introducing a novel carbonate rock typing process that utilizes computer vision capabilities to provide more insight about the heterogeneous carbonate rock texture.<br></p>

Characterizing Fluid Saturation Distribution Using Cross-Well Seismic and Well Data: A Geostatistical Study

1999 ◽  
Author(s):  
Eduardo A. Idrobo ◽  
Adel H. Malallah ◽  
Akhil Datta-Gupta ◽  
Jorge O. Parra
Keyword(s):  
Fluid Saturation ◽  
Saturation Distribution ◽  
Well Data

Copper-dependent ATP7B up-regulation drives the resistance of TMEM16A-overexpressing head-and-neck cancer models to platinum toxicity

2019 ◽  
Vol 476 (24) ◽  
pp. 3705-3719 ◽  
Author(s):  
Avani Vyas ◽  
Umamaheswar Duvvuri ◽  
Kirill Kiselyov
Keyword(s):  
Oxidative Stress ◽  
Head And Neck ◽  
Transcriptional Activation ◽  
Platinum Resistance ◽  
Mrna Levels ◽  
Strong Positive Correlation ◽  
Platinum Compounds ◽  
Copper Chelation ◽  
Novel Approach ◽  
Cancer Models

Platinum-containing drugs such as cisplatin and carboplatin are routinely used for the treatment of many solid tumors including squamous cell carcinoma of the head and neck (SCCHN). However, SCCHN resistance to platinum compounds is well documented. The resistance to platinum has been linked to the activity of divalent transporter ATP7B, which pumps platinum from the cytoplasm into lysosomes, decreasing its concentration in the cytoplasm. Several cancer models show increased expression of ATP7B; however, the reason for such an increase is not known. Here we show a strong positive correlation between mRNA levels of TMEM16A and ATP7B in human SCCHN tumors. TMEM16A overexpression and depletion in SCCHN cell lines caused parallel changes in the ATP7B mRNA levels. The ATP7B increase in TMEM16A-overexpressing cells was reversed by suppression of NADPH oxidase 2 (NOX2), by the antioxidant N-Acetyl-Cysteine (NAC) and by copper chelation using cuprizone and bathocuproine sulphonate (BCS). Pretreatment with either chelator significantly increased cisplatin's sensitivity, particularly in the context of TMEM16A overexpression. We propose that increased oxidative stress in TMEM16A-overexpressing cells liberates the chelated copper in the cytoplasm, leading to the transcriptional activation of ATP7B expression. This, in turn, decreases the efficacy of platinum compounds by promoting their vesicular sequestration. We think that such a new explanation of the mechanism of SCCHN tumors’ platinum resistance identifies novel approach to treating these tumors.

Collecting Words: A Clinical Example of a Morphology-Focused Orthographic Intervention

2020 ◽  
Vol 51 (3) ◽  
pp. 544-560 ◽  
Author(s):  
Kimberly A. Murphy ◽  
Emily A. Diehm
Keyword(s):  
Written Language ◽  
Morphological Knowledge ◽  
English Orthography ◽  
Word Level ◽  
Novel Approach ◽  
Language Pathology ◽  
The One ◽  
Critical Intervention ◽  
Reading And Spelling ◽  
Reading And Spelling Difficulties

Purpose Morphological interventions promote gains in morphological knowledge and in other oral and written language skills (e.g., phonological awareness, vocabulary, reading, and spelling), yet we have a limited understanding of critical intervention features. In this clinical focus article, we describe a relatively novel approach to teaching morphology that considers its role as the key organizing principle of English orthography. We also present a clinical example of such an intervention delivered during a summer camp at a university speech and hearing clinic. Method Graduate speech-language pathology students provided a 6-week morphology-focused orthographic intervention to children in first through fourth grade ( n = 10) who demonstrated word-level reading and spelling difficulties. The intervention focused children's attention on morphological families, teaching how morphology is interrelated with phonology and etymology in English orthography. Results Comparing pre- and posttest scores, children demonstrated improvement in reading and/or spelling abilities, with the largest gains observed in spelling affixes within polymorphemic words. Children and their caregivers reacted positively to the intervention. Therefore, data from the camp offer preliminary support for teaching morphology within the context of written words, and the intervention appears to be a feasible approach for simultaneously increasing morphological knowledge, reading, and spelling. Conclusion Children with word-level reading and spelling difficulties may benefit from a morphology-focused orthographic intervention, such as the one described here. Research on the approach is warranted, and clinicians are encouraged to explore its possible effectiveness in their practice. Supplemental Material https://doi.org/10.23641/asha.12290687

Sign in / Sign up

Export Citation Format

Share Document