Development in Non-Metallic Reinforcement of Damaged Offshore Decks Utilising Composite Materials

Mechanical Properties of Gypsum Matrix Reinforced with Recycled Fibers

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.825.3 ◽

2016 ◽

Vol 825 ◽

pp. 3-6 ◽

Cited By ~ 1

Author(s):

Lukáš Hlubocký ◽

Jaromír Hrůza ◽

Lukas Novák ◽

Jaroslav Topič

Keyword(s):

Mechanical Properties ◽

Composite Materials ◽

Shear Modulus ◽

Glass Fibers ◽

Resonance Method ◽

Steel Fibers ◽

Dynamic Shear Modulus ◽

Dynamic Shear ◽

Metallic Reinforcement ◽

Recycled Fibers

This paper deals with using resonance method for determine a development of mechanical properties of gypsum matrix reinforced with steel fibers from recycled tires. Mechanical properties which were monitored are the dynamic Young's modulus and dynamic shear modulus. Both properties were measured by a resonance method on samples 28 days old. The aim was to check the possibilities of using the recycled tires in construction as reinforcement to the gypsum binder. Many published papers deals with composite materials based on gypsum, but mainly with standard non-metallic reinforcement such as glass fibers, PP and PE fibers etc.

Download Full-text

Comparative Microstructures of Ion Milled and Electrochemically Thinned Composite Materials

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100052742 ◽

1974 ◽

Vol 32 ◽

pp. 546-547

Author(s):

R.R. Russell

Keyword(s):

Electron Microscopy ◽

Transmission Electron Microscopy ◽

Composite Materials ◽

Great Difficulty ◽

Ion Milling ◽

Transmission Electron ◽

Ion Damage ◽

Intermetallic Composite

Transmission electron microscopy of metallic/intermetallic composite materials is most challenging since the microscopist typically has great difficulty preparing specimens with uniform electron thin areas in adjacent phases. The application of ion milling for thinning foils from such materials has been quite effective. Although composite specimens prepared by ion milling have yielded much microstructural information, this technique has some inherent drawbacks such as the possible generation of ion damage near sample surfaces.

Download Full-text

Transmission electron microscopy of composite materials

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100107125 ◽

1988 ◽

Vol 46 ◽

pp. 1012-1015

Author(s):

K.P.D. Lagerlof

Keyword(s):

Composite Materials ◽

Physical Properties ◽

Structural Defects ◽

Structural Composites ◽

Multiphase Materials ◽

Structural Reinforcement ◽

Transmission Electron ◽

Reinforced Fiber ◽

Particulate Reinforced Composites ◽

Definition Of

Although most materials contain more than one phase, and thus are multiphase materials, the definition of composite materials is commonly used to describe those materials containing more than one phase deliberately added to obtain certain desired physical properties. Composite materials are often classified according to their application, i.e. structural composites and electronic composites, but may also be classified according to the type of compounds making up the composite, i.e. metal/ceramic, ceramic/ceramie and metal/semiconductor composites. For structural composites it is also common to refer to the type of structural reinforcement; whisker-reinforced, fiber-reinforced, or particulate reinforced composites [1-4].For all types of composite materials, it is of fundamental importance to understand the relationship between the microstructure and the observed physical properties, and it is therefore vital to properly characterize the microstructure. The interfaces separating the different phases comprising the composite are of particular interest to understand. In structural composites the interface is often the weakest part, where fracture will nucleate, and in electronic composites structural defects at or near the interface will affect the critical electronic properties.

Download Full-text