Can a Cube Model Mitigate Parent-Child Effects and Improve Oil Recovery in the Permian Basin

2020 ◽  
Author(s):  
Qiyan Yan ◽  
Wei Zheng ◽  
Shripad Biniwale ◽  
Raj Banerjee ◽  
Tao Xu ◽  
...  
2021 ◽  
Author(s):  
Robert Downey ◽  
Kiran Venepalli ◽  
Jim Erdle ◽  
Morgan Whitelock

Abstract The Permian Basin of west Texas is the largest and most prolific shale oil producing basin in the United States. Oil production from horizontal shale oil wells in the Permian Basin has grown from 5,000 BOPD in February, 2009 to 3.5 Million BOPD as of October, 2020, with 29,000 horizontal shale oil wells in production. The primary target for this horizontal shale oil development is the Wolfcamp shale. Oil production from these wells is characterized by high initial rates and steep declines. A few producers have begun testing EOR processes, specifically natural gas cyclic injection, or "Huff and Puff", with little information provided to date. Our objective is to introduce a novel EOR process that can greatly increase the production and recovery of oil from shale oil reservoirs, while reducing the cost per barrel of recovered oil. A superior shale oil EOR method is proposed that utilizes a triplex pump to inject a solvent liquid into the shale oil reservoir, and an efficient method to recover the injectant at the surface, for storage and reinjection. The process is designed and integrated during operation using compositional reservoir simulation in order to optimize oil recovery. Compositional simulation modeling of a Wolfcamp D horizontal producing oil well was conducted to obtain a history match on oil, gas, and water production. The matched model was then utilized to evaluate the shale oil EOR method under a variety of operating conditions. The modeling indicates that for this particular well, incremental oil production of 500% over primary EUR may be achieved in the first five years of EOR operation, and more than 700% over primary EUR after 10 years. The method, which is patented, has numerous advantages over cyclic gas injection, such as much greater oil recovery, much better economics/lower cost per barrel, lower risk of interwell communication, use of far less horsepower and fuel, shorter injection time, longer production time, smaller injection volumes, scalability, faster implementation, precludes the need for artificial lift, elimination of the need to buy and sell injectant during each cycle, ability to optimize each cycle by integration with compositional reservoir simulation modeling, and lower emissions. This superior shale oil EOR method has been modeled in the five major US shale oil plays, indicating large incremental oil recovery potential. The method is now being field tested to confirm reservoir simulation modeling projections. If implemented early in the life of a shale oil well, its application can slow the production decline rate, recover far more oil earlier and at lower cost, and extend the life of the well by several years, while precluding the need for artificial lift.


2019 ◽  
Author(s):  
Tao Xu ◽  
Wei Zheng ◽  
Jason Baihly ◽  
Priyank Dwivedi ◽  
Dan Shan ◽  
...  

2008 ◽  
Vol 14 (2) ◽  
pp. 106-112 ◽  
Author(s):  
Roy Otten ◽  
Carmen S. van der Zwaluw ◽  
Haske van der Vorst ◽  
Rutger C.M.E. Engels

2021 ◽  
pp. 1-20
Author(s):  
Yanli Pei ◽  
Wei Yu ◽  
Kamy Sepehrnoori ◽  
Yiwen Gong ◽  
Hongbing Xie ◽  
...  

Summary The extensive depletion of the development target triggers the demand for infill drilling in the upside target of multilayer unconventional reservoirs. However, such an infill scheme in the field practice still heavily relies on empirical knowledge or pressure responses, and the geomechanics consequences have not been fully understood. Backed by the data set from the Permian Basin, in this work we present a novel integrated reservoir-geomechanics-fracture model to simulate the spatiotemporal stress evolution and locate the optimal development strategy in the upside target of the Bone Spring Formation. An embedded discrete fracture model (EDFM) is deployed in our fluid-flow simulation to characterize complex fractures, and the stress-dependent matrix permeability and fracture conductivity are included through the compaction/dilation option. After calibrating reservoir and fracture properties by history matching of an actual well in the development target (i.e., third Bone Spring), we run the finite element method (FEM)-based geomechanics simulation to model the 3D stress state evolution. Then a displacement discontinuity method (DDM) hydraulic fracture model is applied to simulate the multicluster fracture propagation under an updated heterogeneous stress field in the upside target (i.e., second Bone Spring). Numerical results indicate that stress field redistribution associated with parent-well production indeed vertically propagates to the upside target. The extent of stress reorientation at the infill location mainly depends on the parent-child horizontal offset, whereas the stress depletion is under the combined impact of horizontal offset, vertical offset, and infill time. A smaller parent-child horizontal offset aggravates the overlap of the stimulated reservoir volume (SRV), resulting in more substantial interwell interference and less desirable oil and gas production. The same trend is observed by varying the parent-child vertical offset. Moreover, the efficacy of an infill operation at an earlier time is less affected by parent-well depletion because of the less-disturbed stress state. The candidate infill-well locations at various infill timings are suggested based on the parent-well and child-well production cosimulation. Being able to incorporate both pressure and stress responses, the reservoir-geomechanics-fracture model delivers a more comprehensive understanding and a more integral solution of infill-well design in multilayer unconventional reservoirs. The conclusions provide practical guidelines for the subsequent development in the Permian Basin.


2019 ◽  
Vol 38 (2) ◽  
pp. 162-162

A one-day Unconventional Resources Technology Conference (URTeC) workshop will bring together recent case studies from Permian Basin operators, service providers, and academia to provide key learning points that can be tested and applied to improve recovery and maximize return on investment. Titled “Understanding parent-child well dynamics,” the workshop will take place 5 March in Midland, Texas.


Sign in / Sign up

Export Citation Format

Share Document