Wellbore Stability Analysis in Anisotropic Shale Formations

2019 ◽  
Author(s):  
Dayal Parkash ◽  
Chiara Deangeli
Keyword(s):  
Stability Analysis ◽  
Wellbore Stability ◽  
Shale Formations

Wellbore Stability in Layered Rocks: A Comparative Study of Strength Criteria

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Xiangchao Shi ◽  
Xiao Zhuo ◽  
Yue Xiao ◽  
Boyun Guo ◽  
Cheng Zhu ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Good Choice ◽  
Wellbore Stability ◽  
Gas Field ◽  
Well Drilling ◽  
Shale Formations ◽  
Single Plane ◽  
Collapse Pressure ◽  
Bedding Planes ◽  
Laminated Structures

Abstract Wellbore instability is a critical issue restricting efficient well drilling and successful development of oil and gas field. Most instability problems originate from shale formations because of their distinct laminated structures that cause significant anisotropy and moderate to high clay contents that are prone to shrinkage and swelling. To account for these influences on the mechanical responses of shales, this study aims to identify an appropriate strength criterion for stability analyses. Two anisotropic criteria including single plane of weakness and the modified Hoek–Brown criteria were compared to evaluate their suitability in characterizing the anisotropic strength of layered rocks including shale, schist, and slate under different confining pressures. Comparative case studies indicated that the single plane of weakness criterion overestimates the strength of layered rocks at some orientation angles. The modified Hoek–Brown criterion can fit well with the experimental data of layered rocks. Moreover, wellbore stability analysis models for shale gas wells were built, respectively, for each criterion and applied to in situ scenarios. The single plane of weakness and modified Hoek–Brown criteria provide similar results of collapse pressure, and the shale failure is mainly determined by the bedding plane. This further validates that the modified Hoek–Brown criterion is a good choice for wellbore stability analysis in shale formations with bedding planes. This study shows the potential of using the modified Hoek–Brown criterion to enhance the safety and efficiency of well drilling and operation in shale formations.

Coupled Thermal-Hydro-Mechanical-Chemical Modeling for Time-Dependent Anisotropic Wellbore Stability Analysis

2021 ◽  
Author(s):  
Jingyou Xue ◽  
Kenji Furui
Keyword(s):  
Stability Analysis ◽  
Chemical Potential ◽  
Bedding Plane ◽  
Wellbore Stability ◽  
Time Dependent ◽  
Drilling Fluids ◽  
Shale Formations ◽  
Wellbore Instability ◽  
Bedding Planes ◽  
Stress Changes

<p>Wellbore instability is one of the most serious drilling problems increasing well cost in well construction processes. It is widely known that many wellbore instability problems are reported in shale formations where water sensitive clay mineral exist. The problems become further complicated when the shale exhibits variation in strength properties along and across bedding planes. In this study, a coupled thermal-hydro-mechanical-chemical (THMC) model was developed for time-dependent anisotropic wellbore stability analysis considering chemical interactions between swelling shale and drilling fluids, thermal effects, and poro-elastoplastic stress-strain behaviors.</p><p>The THMC simulator developed in this work assumes that the shale formation behaves as an ion exchange membrane where swelling depends on chemical potential of drilling fluids invading from the wellbore to the pore spaces. The time-dependent chemical potential changes of water within the shale are evaluated using an analytical diffusion equation resulting in the evolution of swelling strain around the wellbore. On the other hand, the thermal and pressure diffusion equations are evaluated numerically by finite differences. The stress changes associated with thermal, hydro, and chemical effects are coupled to the 3D poroelastoplastic finite element model. The effects of bedding planes are also taken into account in the FEM model through the crack tensor method in which the normal and tangential stiffnesses of the bedding planes have stress dependency. The failure of the formation rock is judged based on the critical plastic strain limit.</p><p>The numerical analysis results indicate that the rock strength anisotropy induced by the existence of bedding planes is the most important factor influencing the stability of the wellbore among various THMC process parameters investigated in this work. The numerical results also reveal that an established theory to orient the wellbore in the direction of the minimum principal stress is not always a favorable option when the effect of the anisotropy of in-situ stresses and the distribution angle of bedding planes cancel out each other. Depending on both the distribution angle of bedding plane and ratio of the vertical to the horizontal stress, the trend of minimum mud pressure showed a great variation as predicted by the yield and failure criterion implemented in the model. Furthermore, the analysis results reveal that the distribution and evolution of plastic strains caused by the THMC processes have the time dependency, which can be controlled by the temperature and salinity of the drilling fluids.</p><p>The numerical wellbore stability analysis model considering shale swelling and bedding plane effects provides an effective tool for designing optimum well trajectories and determining safe mud weight windows for drilling complex shale formations. The time-dependent margins of safe mud weight window of drilling can be fine-tuned when the interaction among various parameters is fully considered as the THMC processes.</p>

Stability analysis of wellbore for multiple weakness planes in shale formations

2021 ◽  
Vol 7 (2) ◽  
Author(s):  
Wanchun Zhao ◽  
Yu Liu ◽  
Tingting Wang ◽  
P. G. Ranjith ◽  
Yufeng Zhang
Keyword(s):  
Stability Analysis ◽  
Shale Formations

scholarly journals Chemical and Thermal Effects on Wellbore Stability of Shale Formations

2001 ◽  
Author(s):  
M. Yu ◽  
G. Chen ◽  
M.E. Chenevert ◽  
M.M. Sharma
Keyword(s):  
Thermal Effects ◽  
Wellbore Stability ◽  
Shale Formations

Wellbore Geomechanics of Extended Drilling Margin and Engineered Lost-Circulation Solutions

SPE Journal ◽  
2017 ◽  
Vol 22 (04) ◽  
pp. 1178-1188 ◽  
Author(s):  
Amin Mehrabian ◽  
Younane Abousleiman
Keyword(s):  
Mechanical Properties ◽  
Stability Analysis ◽  
Analytical Approach ◽  
Wellbore Stability ◽  
Tensile Failure ◽  
Mechanical Interaction ◽  
Lost Circulation ◽  
Drilling Operations ◽  
Secondary Fractures ◽  
Lost Circulation Materials

Summary Wellbore tensile failure is a known consequence of drilling with excessive mud weight, which can cause costly events of lost circulation. Despite the successful use of lost-circulation materials (LCMs) in treating lost-circulation events of the drilling operations, extensions of wellbore-stability models to the case of a fractured and LCM-treated wellbore have not been published. This paper presents an extension of the conventional wellbore-stability analysis to such circumstances. The proposed wellbore geomechanics solution revisits the criteria for breakdown of a fractured wellbore to identify an extended margin for the equivalent circulation density (ECD) of drilling. An analytical approach is taken to solve for the related multiscale and nonlinear problem of the three-way mechanical interaction between the wellbore, fracture wings, and LCM aggregate. The criteria for unstable propagation of existing near-wellbore fractures, together with those for initiating secondary fractures from the wellbore, are obtained. Results suggest that, in many circumstances, the occurrence of both incidents can be prevented, if the LCM blend is properly engineered to recover certain depositional and mechanical properties at downhole conditions. Under such optimal design conditions, the maximum ECD to which the breakdown limit of a permeable formation could be enhanced is predicted.

An Experimental Study to Demonstrate that Nanoparticles can Filter into Shale Formations and Improve Wellbore Stability

2020 ◽  
Author(s):  
Nancy Zhou ◽  
Yongkang Wu ◽  
Meng Lu ◽  
Yucheng Li ◽  
Fuchen Liu ◽  
...  
Keyword(s):  
Experimental Study ◽  
Wellbore Stability ◽  
Shale Formations
Sign in / Sign up

Export Citation Format

Share Document