Nanoparticles Screening Criteria for Wettability Alteration in Carbonate Reservoirs

2021 ◽  
Author(s):  
Xiao Deng ◽  
Muhammad Shahzad Kamal ◽  
Shirish Patil ◽  
Muhammad Shakil Hussain
Keyword(s):  
Carbonate Rock ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Titania Nanoparticles ◽  
Wettability Alteration ◽  
Divalent Ions ◽  
Rock Samples ◽  
Low Salinity ◽  
Monovalent Ions ◽  
Reservoir Conditions

Abstract Wettability alteration has been recognized as a key mechanism for enhanced oil recovery in oil-wet carbonate reservoirs. Nanoparticles can change rock surfaces from oil-wet to water-wet. However, there are multiple kinds of nanoparticles and different reservoir conditions. It is necessary to establish a screen system to guide nanoparticles selection. Temperature and salinity are two important reservoir conditions that may have a big influence on the performance of nanoparticles. Besides, divalent ions and monovalent ions can have a different impact. In this paper, different kinds of commercial nanoparticles were used as wettability modifiers on carbonate rock. Metallic oxide nanoparticles, SiO2, and titania nanoparticles were dissolved into brine solution under varying temperatures (50°C – 100°C) and salinity (2500 – 210,000ppm). Carbonate rock samples were aged by crude oil to make them oil-wet. After that, rock samples were immersed in brine and nanoparticle solutions to measure the contact angles under different temperature. Rock surfaces were then examined by scanning electron microscope (SEM) to see the adsorption and distribution of nanoparticles. Stability data shows that nanoparticles tend to be more stable under high temperature, low salinity conditions. Besides, monovalent ions have a smaller impact on nanoparticle stability than divalent ions. By monitoring contact angle with time, a quicker wettability alteration was observed with SiO2 and CaCO3 nanoparticles on carbonate rock under higher temperatures, indicating that temperature has a significant influence on the performance of nanoparticles. SEM images show that under low salinity conditions, nanoparticles tend to be more scattered. This paper showed that nanoparticles are very effective materials for carbonate wettability alteration under varying temperature and salinity. Besides, the relative performance of nanoparticles under different conditions and a screening guide according to carbonate reservoir conditions are provided

scholarly journals Bulk and Surface Aqueous Speciation of Calcite: Implications for Low-Salinity Waterflooding of Carbonate Reservoirs

SPE Journal ◽  
2017 ◽  
Vol 23 (01) ◽  
pp. 84-101 ◽  
Author(s):  
Maxim P. Yutkin ◽  
Himanshu Mishra ◽  
Tadeusz W. Patzek ◽  
John Lee ◽  
Clayton J. Radke
Keyword(s):  
Ionic Strength ◽  
Ion Exchange ◽  
Crude Oil ◽  
Surface Charge ◽  
Double Layer ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Diffuse Double Layer ◽  
Low Salinity ◽  
Low Salinity Waterflooding

Summary Low-salinity waterflooding (LSW) is ineffective when reservoir rock is strongly water-wet or when crude oil is not asphaltenic. Success of LSW relies heavily on the ability of injected brine to alter surface chemistry of reservoir crude-oil brine/rock (COBR) interfaces. Implementation of LSW in carbonate reservoirs is especially challenging because of high reservoir-brine salinity and, more importantly, because of high reactivity of the rock minerals. Both features complicate understanding of the COBR surface chemistries pertinent to successful LSW. Here, we tackle the complex physicochemical processes in chemically active carbonates flooded with diluted brine that is saturated with atmospheric carbon dioxide (CO2) and possibly supplemented with additional ionic species, such as sulfates or phosphates. When waterflooding carbonate reservoirs, rock equilibrates with the injected brine over short distances. Injected-brine ion speciation is shifted substantially in the presence of reactive carbonate rock. Our new calculations demonstrate that rock-equilibrated aqueous pH is slightly alkaline quite independent of injected-brine pH. We establish, for the first time, that CO2 content of a carbonate reservoir, originating from CO2-rich crude oil and gas, plays a dominant role in setting aqueous pH and rock-surface speciation. A simple ion-complexing model predicts the calcite-surface charge as a function of composition of reservoir brine. The surface charge of calcite may be positive or negative, depending on speciation of reservoir brine in contact with the calcite. There is no single point of zero charge; all dissolved aqueous species are charge determining. Rock-equilibrated aqueous composition controls the calcite-surface ion-exchange behavior, not the injected-brine composition. At high ionic strength, the electrical double layer collapses and is no longer diffuse. All surface charges are located directly in the inner and outer Helmholtz planes. Our evaluation of calcite bulk and surface equilibria draws several important inferences about the proposed LSW oil-recovery mechanisms. Diffuse double-layer expansion (DLE) is impossible for brine ionic strength greater than 0.1 molar. Because of rapid rock/brine equilibration, the dissolution mechanism for releasing adhered oil is eliminated. Also, fines mobilization and concomitant oil release cannot occur because there are few loose fines and clays in a majority of carbonates. LSW cannot be a low-interfacial-tension alkaline flood because carbonate dissolution exhausts all injected base near the wellbore and lowers pH to that set by the rock and by formation CO2. In spite of diffuse double-layer collapse in carbonate reservoirs, surface ion-exchange oil release remains feasible, but unproved.

Geochemical Modeling on Effect of Active Species, Ca2+, Mg2+ and SO2-4 on the Carbonate Rock Surface, in Connection to Wettability Alteration of the Rock

2021 ◽  
Author(s):  
Mohamed Ibrahim Mohamed ◽  
Vladimir Alvarado
Keyword(s):  
Contact Angle ◽  
Surface Charge ◽  
Oil Recovery ◽  
Carbonate Rock ◽  
Carbonate Reservoirs ◽  
Wettability Alteration ◽  
Rock Properties ◽  
Carboxyl Group ◽  
Geochemical Model ◽  
Positively Charged

Abstract A large percentage of petroleum reserves are located in carbonate reservoirs, which can be divided into limestone, chalk and dolomite. Roughly the oil recovery from carbonates is below the 30% due to the strong oil wetness, low permeability, abundance of natural fractures, and inhomogeneous rock properties Austad (2013). Injection of adjusted brine chemistry into carbonate reservoirs has been reported to increase oil recovery by 5-30% of the original oil in place in field tests and core flooding experiments. Previous studies have shown that adjusted waterflooding recovery in carbonate reservoirs is dependent on the composition and ionic strength of the injection brine (Morrow et al. 1998; Zhang 2005). Many research works have focused on the role of the brine composition in altering the initial wettability state of carbonate rock, which is usually intermediate- to oil-wet. Crude oils contain carboxyl group, -COOH, that can be found in the resin and asphaltenes fractions. The negatively charged carboxyl group, -COOH bond very strongly with the positively charged, sites on the carbonate surface. The carbonate surface, which is positively charged is believed to adsorb the SO42− that is negatively charged. On the other side cations Ca2+ and Mg2+ bind to the negatively charged carboxylic group and release it from the surface. In this study we use a closed system geochemical model to study the effect of the surface-charge dominant species; Ca2+, Mg2+ and SO42− on the carbonate surfaces at 80 °C. The proposed geochemical interactions can possibly lead to a change in the surface charge, altering wettability of the rock by exchanging ions/cations. Brines with various concentrations of Mg2+ and SO42− were prepared in the lab and contact angle between carbonate substrate and crude oil was measured using a rising/captive bubble tensiometer at 80 °C. The composition of the carbonate system was collected from previous literature review and the composition of adjusted brines was used to build a surface sorption database to develop a geochemical model. This model is focused on identifying the reaction paths and the surface behavior that may represent the real system. Changes in carbonate surface wettability were further evaluated using a series of contact angle experiments. Experimental observations and modeling results are concordant and imply that SO42− ions may alter the wettability of carbonate surface at high temperature.

Impact of clay type and water composition on low salinity water injection – visualisation approach

2018 ◽  
Vol 58 (1) ◽  
pp. 51 ◽  
Author(s):  
Tammy Amirian ◽  
Manouchehr Haghighi
Keyword(s):  
Oil Recovery ◽  
Wettability Alteration ◽  
Oil Film ◽  
Low Salinity ◽  
Water Composition ◽  
Low Salinity Water ◽  
Monovalent Ions ◽  
Salinity Water ◽  
The Impact ◽  
Clay Type

Low salinity water (LSW) injection as an enhanced oil recovery method has attracted much attention in the past two decades. Previously, it was found that the presence of clay such as kaolinite and water composition like the nature of cations affect the enhancement of oil recovery under LSW injection. In this study, a pore-scale visualisation approach was developed using a 2D glass micromodel to investigate the impact of clay type and water composition on LSW injection. The glass micromodels were coated by kaolinite and illite. A meniscus moving mechanism was observed and the oil–water interface moved through narrow throats to large bodies, displacing the wetting phase (oil phase). In the presence of kaolinite, the effect of LSW injection was reflected in the change to the wettability with a transition towards water-wetness in the large sections of the pore walls. The advance of the stable water front left behind an oil film on the oil-wet portions of pore walls; however, in water-wet surfaces, the interface moved towards the surface and replaced the oil film. As a result of wettability alteration towards a water-wet state, the capillary forces were not dominant throughout the system and the water–oil menisci displaced oil in large portions of very narrow channels. This LSW effect was not observed in the presence of illite. With regard to the water composition effect, systems containing divalent cations like Ca2+ showed the same extent of recovery as those containing only monovalent ions. The observation indicates a significant role of cation exchange in wettability alteration. Fines migration was insignificant in the observations.

Effect of Total Acid Number and Recovery Mode on Low-Salinity Enhanced Oil Recovery in Carbonates

2021 ◽  
pp. 1-18
Author(s):  
Takaaki Uetani ◽  
Hiromi Kaido ◽  
Hideharu Yonebayashi
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Carbonate Rock ◽  
Acid Number ◽  
Spontaneous Imbibition ◽  
Wettability Alteration ◽  
Oil Composition ◽  
Total Acid ◽  
Low Salinity ◽  
Total Acid Number

Summary Low-salinity water (LSW) flooding is an attractive enhanced oil recovery (EOR) option, but its mechanism leading to EOR is poorly understood, especially in carbonate rock. In this paper, we investigate the main reason behind two tertiary LSW coreflood tests that failed to demonstrate promising EOR response in reservoir carbonate rock; additional oil recovery factors by the LSW injection were only +2% and +4% oil initially in place. We suspected either the oil composition (lack of acid content) or the recovery mode (tertiary mode) was inappropriate. Therefore, we repeated the experiments using an acid-enriched oil sample and injected LSW in the secondary mode. The result showed that the low-salinity effect was substantially enhanced; the additional oil recovery factor by the tertiary LSW injection jumped to +23%. Moreover, it was also found that the secondary LSW injection was more efficient than the tertiary LSW injection, especially in the acid-enriched oil reservoir. In summary, it was concluded that the total acid number (TAN) and the recovery mode appear to be the key successful factors for LSW in our carbonate system. To support the conclusion, we also performed contact angle measurement and spontaneous imbibition tests to investigate the influence of acid enrichment on wettability, and moreover, LSW injection on wettability alteration.

Wettability Alteration During Low-Salinity Waterflooding in a Deep Tight Carbonate Reservoirs: A Quantitative and Visual Investigation Through Spontaneous Imbibition and Zeta Potentiometric Studies

2021 ◽  
Author(s):  
N. Singh ◽  
P. H. Gopani ◽  
H. K. Sarma ◽  
F. Wu ◽  
P. S. Mattey ◽  
...  
Keyword(s):  
Contact Angle ◽  
Zeta Potential ◽  
Carbonate Reservoir ◽  
Spontaneous Imbibition ◽  
Wettability Alteration ◽  
Rock Surface ◽  
Rock Interaction ◽  
Low Salinity ◽  
Tight Carbonate ◽  
Repulsive Forces

Abstract This study focusses on the investigation of wettability alteration behavior during low salinity waterflood (LSWF) process in a tight carbonate reservoir through Zeta potential studies in conjunction with spontaneous imbibition tests and estimation of the contact angle between the wetting fluid and the rock surface. This will help in understanding the role rock-oil-brine interactions play during an LSWF process. The classical streaming potential technique were used to determine Zeta potential. Measurements were carried out with diluted brines using different rock samples of in two states: oil-saturated and brine-saturated. The experimental results imply that the value of zeta potential becomes more negative with increasing percentage of dilution (25%, 10%, and 1%). This is attributed to electrical double-layer expansion which is caused, primarily, by the reduced ionic strength. We concluded that rock saturated with oil may give an insight on oil rock interactions while the rock saturated with brine may give insight on rock-brine interactions. The dilution of water helps increase the electrostatic repulsive forces between the two interfaces, which in turns, leads to the incremental recovery during LSWF process. This observation was also confirmed by coreflooding and wettability experiments through spontaneous imbibition tests and contact angle measurements conducted using the same oil-brine-rock systems. This is an investigative study of oil-brine-rock interaction behavior during a LSWF process that is difficult to accomplish through and during a conventional coreflooding displacement test. In addition, this study also couples the relationship between the wettability alteration and oil-brine-rock interactions during an LSWF process.

scholarly journals A Review on the Progress of Ion-Engineered Water Flooding

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Alibi Kilybay ◽  
Bisweswar Ghosh ◽  
Nithin Chacko Thomas
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
Water Injection ◽  
Oil And Gas Industry ◽  
Carbonate Reservoir ◽  
Water Flooding ◽  
Wettability Alteration ◽  
Gas Industry ◽  
Low Salinity ◽  
Smart Water

In the oil and gas industry, Enhanced Oil Recovery (EOR) plays a major role to meet the global requirement for energy. Many types of EOR are being applied depending on the formations, fluid types, and the condition of the field. One of the latest and promising EOR techniques is application of ion-engineered water, also known as low salinity or smart water flooding. This EOR technique has been studied by researchers for different types of rocks. The mechanisms behind ion-engineered water flooding have not been confirmed yet, but there are many proposed mechanisms. Most of the authors believe that the main mechanism behind smart water flooding is the wettability alteration. However, other proposed mechanisms are interfacial tension (IFT) reduction between oil and injected brine, rock dissolution, and electrical double layer expansion. Theoretically, all the mechanisms have an effect on the oil recovery. There are some evidences of success of smart water injection on the field scale. Chemical reactions that happen with injection of smart water are different in sandstone and carbonate reservoirs. It is important to understand how these mechanisms work. In this review paper, the possible mechanisms behind smart water injection into the carbonate reservoir with brief history are discussed.

Surfactant-Aided Low-Salinity Waterflooding for Low-Temperature Carbonate Reservoirs

SPE Journal ◽  
2021 ◽  
pp. 1-17
Author(s):  
Yue Shi ◽  
Chammi Miller ◽  
Kishore Mohanty
Keyword(s):  
Low Temperature ◽  
Oil Recovery ◽  
Anionic Surfactants ◽  
Surfactant Solution ◽  
Carbonate Reservoirs ◽  
Spontaneous Imbibition ◽  
Wettability Alteration ◽  
Low Salinity ◽  
Low Salinity Waterflooding ◽  
Original Oil In Place

Summary Carbonate reservoirs tend to be oil-wet/mixed-wet and heterogeneous because of mineralogy and diagenesis. The objective of this study is to improve oil recovery in low-temperature dolomite reservoirs using low-salinity and surfactant-aided spontaneous imbibition. The low-salinity brine composition was optimized using ζ-potential measurements, contact-angle (CA) experiments, and a novel wettability-alteration measure. Significant wettability alteration was observed on dolomite rocks at a salinity of 2,500 ppm. We evaluated 37 surfactants by performing CA, interfacial-tension (IFT), and spontaneous-imbibition experiments. Three (quaternary ammonium) cationic and one (sulfonate) anionic surfactants showed significant wettability alteration and produced 43–63% of original oil in place (OOIP) by spontaneous imbibition. At a low temperature (35°C), oil recovery by low-salinity effect is small compared with that by wettability-altering surfactants. Coreflood tests were performed with a selected low-salinity cationic surfactant solution. A novel coreflood was proposed that modeled heterogeneity and dynamic imbibition into low-permeability regions. The results of the “heterogeneous” coreflood were consistent with that of spontaneous-imbibition tests. These experiments demonstrated that a combination of low-salinity brine and surfactants can make originally oil-wet dolomite rocks more water-wet and improve oil recovery from regions bypassed by waterflood at a low temperature of 35°C.

Sign in / Sign up

Export Citation Format

Share Document