CO Sequestration in Geological Formations: Pore-Level to Reservoir-Scale Up-Scaling

2008 ◽  
Author(s):  
F. Javadpour
Author(s):  
Mara Balestrini ◽  
Alexander Kotsev ◽  
Marisa Ponti ◽  
Sven Schade

AbstractProjects producing citizen-generating data (CGD) to provide evidence and to drive change have increased considerably in the last decade. Many of these initiatives build on multi-actor collaboration and are often supported by non-governmental organisations (NGOs), the public sector, businesses or community-based organisations. The joint efforts of these actors are often necessary to provide the resources and the support that citizens need to produce data. In return, organisations can harness the data to support their objectives. The recent growth (or up-scaling) of CGD projects has created opportunities, as well as challenges for capacity building and sustainability. These challenges can affect the continuity and effectiveness of these initiatives and, in turn, the quality and utility of collected data. This paper analyses two CGD projects to consider their social implications and the measures necessary to increase their capacity, up-scaling, spreading, and sustainability. The case studies on noise monitoring and invasive alien species describe, respectively, a bottom-up approach at city level and a top-down approach at the European level. Regardless of the approach, capacity building requires a process of infrastructuring that engages different actors, responds to matters of concern, assesses community capacities and needs, and develops a vision and action plan. Further, the appropriation and repurposing of technical systems is required to scale up and spread CGD projects. In this process, participants’ activities are shaped by technologies, while the meaning and effects of technologies are shaped through participants’ activities.


Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2093
Author(s):  
Víctor Gregorio ◽  
Nuria García ◽  
Pilar Tiemblo

Gel electrolytes are prepared with Ultra High Molecular Weight (UHMW) polyethylene oxide (PEO) in a concentration ranging from 5 to 30 wt.% and Li- and Na-doped 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (PYR14-TFSI) by a simple procedure consisting of dissolving PEO by melting it directly in the liquid electrolyte while stirring the blend. This procedure is fast, reproducible and needs no auxiliary solvents, which makes it sustainable and potentially easy to scale up for mass production. The viability of the up-scaling by extrusion has been studied. Extrusion has been chosen because it is a processing method commonly employed in the plastics industry. The structure and morphology of the gel electrolytes prepared by both methods have been studied by DSC and FTIR, showing small differences among the two methods. Composite gels incorporation high concentrations of surface modified sepiolite fibers have been successfully prepared by extrusion. The rheological behavior and ionic conductivity of the gels have been characterized, and very similar performance of the extruded and manually mixed gels is detected. Ionic conductivity of all the gels, including the composites, are at or over 0.4 mS cm−1 at 25 °C, being at the same time thermoreversible and self-healing gels, tough, sticky, transparent and stretchable. This combination of properties, together with the viability of their industrial up-scaling, makes these gel electrolyte families very attractive for their application in energy storage devices.


2020 ◽  
Author(s):  
◽  
Simone M.P. Meroni

Perovskite solar cells represent a new class of photovoltaic devices that, in only a decade, has already been achieved comparable performance to that of the most established photovoltaic technologies. To satisfy the demanding market require-ments, however, perovskite solar cells need to have the high performances with the use of low-cost materials and cost-effective fabrication processes, during a long term in the working environment and this needs to be possible for both small scale and large-scale devices.The fully printable carbon perovskite solar cells are based on an inorganic triple mesoscopic stack that is infiltrated by a perovskite precursors solution. This architecture seems to be the most promising to satisfy the requirements of the market, because the manufacture can simply occur with low-cost materials and well-established industrial deposition techniques, such as screen printing. Further-more, the stability of these cells was reported to be one of the longest among perovskite solar cells, making this technology the closest to make market penetra-tion.This work focuses on fully printable perovskite solar cells with a special outlook at their up-scaling in series-connected modules. The fabrication of large area modules with both high performance and substrate coverage will be discussed, in a journey that starts from single cell devices, overcomes issues found in the up-scaling process, and finally reaches design optimisation. Devices of single cells with 1 cm2 active area will be presented, as well as modules on 5 × 5 cm2 or 10 × 10 cm2 substrates. Finally, series-connected modules with around 200 cm2 active area and high coverage on the substrate will be shown.


Author(s):  
L.E. Murr ◽  
J.S. Dunning ◽  
S. Shankar

Aluminum additions to conventional 18Cr-8Ni austenitic stainless steel compositions impart excellent resistance to high sulfur environments. However, problems are typically encountered with aluminum additions above about 1% due to embrittlement caused by aluminum in solid solution and the precipitation of NiAl. Consequently, little use has been made of aluminum alloy additions to stainless steels for use in sulfur or H2S environments in the chemical industry, energy conversion or generation, and mineral processing, for example.A research program at the Albany Research Center has concentrated on the development of a wrought alloy composition with as low a chromium content as possible, with the idea of developing a low-chromium substitute for 310 stainless steel (25Cr-20Ni) which is often used in high-sulfur environments. On the basis of workability and microstructural studies involving optical metallography on 100g button ingots soaked at 700°C and air-cooled, a low-alloy composition Fe-12Cr-5Ni-4Al (in wt %) was selected for scale up and property evaluation.


Planta Medica ◽  
2012 ◽  
Vol 78 (11) ◽  
Author(s):  
RS Barboza ◽  
BR Rocha ◽  
AC Siani ◽  
LMM Valente ◽  
JL Mazzei
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document