Empirical Links Between Sub-Surface Drivers and Engineering Levers for Hydraulic Fracture Treatments and the Implications for Well Performance

2019 ◽  
Author(s):  
Ben Stephenson ◽  
Taixu Bai ◽  
Paul Huckabee ◽  
John Tolle ◽  
Ruijian Li ◽  
...  
Keyword(s):  
Hydraulic Fracture ◽  
Well Performance

Enhance horizontal well performance by optimising multistage hydraulic fracture and water flooding

2017 ◽  
Vol 15 (1) ◽  
pp. 25
Author(s):  
Bin Yuan ◽  
Chen Xu ◽  
Kai Wang ◽  
Wei Zhang ◽  
Rouzbeh Ghanbarnezhad Moghanloo ◽  
...  
Keyword(s):  
Hydraulic Fracture ◽  
Horizontal Well ◽  
Water Flooding ◽  
Well Performance

Comparison of Fractured-Horizontal-Well Performance in Tight Sand and Shale Reservoirs

2011 ◽  
Vol 14 (02) ◽  
pp. 248-259 ◽  
Author(s):  
E.. Ozkan ◽  
M Brown ◽  
R.. Raghavan ◽  
H.. Kazemi
Keyword(s):  
Hydraulic Fracture ◽  
Horizontal Well ◽  
Flow Model ◽  
Horizontal Wells ◽  
Natural Fracture ◽  
Well Performance ◽  
Fracture Conductivity ◽  
Fractured Horizontal Well ◽  
Shale Reservoirs ◽  
Fractured Horizontal Wells

Summary This paper presents a discussion of fractured-horizontal-well performance in millidarcy permeability (conventional) and micro- to nanodarcy permeability (unconventional) reservoirs. It provides interpretations of the reasons to fracture horizontal wells in both types of formations. The objective of the paper is to highlight the special productivity features of unconventional shale reservoirs. By using a trilinear-flow model, it is shown that the drainage volume of a multiple-fractured horizontal well in a shale reservoir is limited to the inner reservoir between the fractures. Unlike conventional reservoirs, high reservoir permeability and high hydraulic-fracture conductivity may not warrant favorable productivity in shale reservoirs. An efficient way to improve the productivity of ultratight shale formations is to increase the density of natural fractures. High natural-fracture conductivities may not necessarily contribute to productivity either. Decreasing hydraulic-fracture spacing increases the productivity of the well, but the incremental production gain for each additional hydraulic fracture decreases. The trilinear-flow model presented in this work and the information derived from it should help the design and performance prediction of multiple-fractured horizontal wells in shale reservoirs.

scholarly journals Unconventional Well Test Analysis for Assessing Individual Fracture Stages through Post-Treatment Pressure Falloffs: Case Study

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6747
Author(s):  
Abdulaziz Ellafi ◽  
Hadi Jabbari
Keyword(s):  
Oil Recovery ◽  
Hydraulic Fracture ◽  
Early Stage ◽  
Natural Fracture ◽  
Well Test ◽  
Well Performance ◽  
Secondary Fracture ◽  
Design For All ◽  
Fracture Closure ◽  
Pressure Analysis

Researchers and operators have recently become interested in the individual stage optimization of unconventional reservoir hydraulic fracture. These professionals aim to maximize well performance during an unconventional well’s early-stage and potential Enhanced Oil Recovery (EOR) lifespan. Although there have been advances in hydraulic fracturing technology that allow for the creation of large stimulated reservoir volumes (SRVs), it may not be optimal to use the same treatment design for all stages of a well or many wells in an area. We present a comprehensive review of the main approaches used to discuss applicability, pros and cons, and a detailed comparison between different methodologies. Our research outlines a combination of the Diagnostic Fracture Injection Test (DFIT) and falloff pressure analysis, which can help to design intelligent production and improve well performance. Our field study presents an unconventional well to explain the objective optimization workflow. The analysis indicates that most of the fracturing fluid was leaked off through natural fracture surface area and resulted in the estimation of larger values compared to the hydraulic fracture calculated area. These phenomena might represent a secondary fracture set with a high fracture closure stress activated in neighbor stages that was not well-developed in other sections. The falloff pressure analysis provides significant and vital information, assisting operators in fully understanding models for fracture network characterization.

Predicting Well Performance in Naturally Fractured Reservoir

2013 ◽  
Author(s):  
Yunsuk Hwang ◽  
Jiajing Lin ◽  
David Schechter ◽  
Ding Zhu
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Network ◽  
Darcy Flow ◽  
Natural Fracture ◽  
Hydraulic Fractures ◽  
Natural Fractures ◽  
Well Performance ◽  
Fracture Networks ◽  
Complex Fracture ◽  
Complex Fracture Network

Multiple hydraulic fracture treatments in reservoirs with natural fractures create complex fracture networks. Predicting well performance in such a complex fracture network system is an extreme challenge. The statistical nature of natural fracture networks changes the flow characteristics from that of a single linear fracture. Simply using single linear fracture models for individual fractures, and then summing the flow from each fracture as the total flow rate for the network could introduce significant error. In this paper we present a semi-analytical model by a source method to estimate well performance in a complex fracture network system. The method simulates complex fracture systems in a more reasonable approach. The natural fracture system we used is fractal discrete fracture network model. We then added multiple dominating hydraulic fractures to the natural fracture system. Each of the hydraulic fractures is connected to the horizontal wellbore, and some of the natural fractures are connected to the hydraulic fractures through the network description. Each fracture, natural or hydraulically induced, is treated as a series of slab sources. The analytical solution of superposed slab sources provides the base of the approach, and the overall flow from each fracture and the effect between the fractures are modeled by applying the superposition principle to all of the fractures. The fluid inside the natural fractures flows into the hydraulic fractures, and the fluid of the hydraulic fracture from both the reservoir and the natural fractures flows to the wellbore. This paper also shows that non-Darcy flow effects have an impact on the performance of fractured horizontal wells. In hydraulic fracture calculation, non-Darcy flow can be treated as the reduction of permeability in the fracture to a considerably smaller effective permeability. The reduction is about 2% to 20%, due to non-Darcy flow that can result in a low rate. The semi-analytical solution presented can be used to efficiently calculate the flow rate of multistage-fractured wells. Examples are used to illustrate the application of the model to evaluate well performance in reservoirs that contain complex fracture networks.

Sign in / Sign up

Export Citation Format

Share Document