Permeability Derivation from Sonic Stoneley Wave Attenuation Measurements: Application in a Giant Carbonate Field from Middle East

Author(s):  
Hezhu Yin ◽  
Xianyun Wu ◽  
Lyndon Yose
Geophysics ◽  
1989 ◽  
Vol 54 (3) ◽  
pp. 330-341 ◽  
Author(s):  
Andrew N. Norris

The tube wave, or low‐frequency manifestation of the Stoneley wave, has been modeled previously using the quasi‐static approximation; I extend this method to include the effect of the formation matrix compressibility, which tends to marginally increase the tube‐wave attenuation. Using the Biot theory of poroelasticity, I develop a fully dynamic description of the Stoneley wave. The dispersion relation derived from Biot’s equations reduces in the low‐frequency limit to the quasi‐static dispersion relation. Comparisons of the quasi‐static and dynamic theories for typical sandstones indicate the former to be a good approximation to at least 1 kHz for oil and water infiltration. At higher frequencies, usually between 5 and 20 kHz for the formations considered, a maximum in the Stoneley Q is predicted by the dynamic theory. This phenomenon cannot be explained by the quasi‐static approximation, which predicts a constantly increasing Q with frequency. Instead, the peak in Q may be understood as a transition from dispersion dominated by bore curvature to a higher frequency regime in which the Stoneley wave behaves like a wave on a flat fluid‐porous interface. This hypothesis is supported by analytical and numerical results.


Geophysics ◽  
1991 ◽  
Vol 56 (4) ◽  
pp. 447-460 ◽  
Author(s):  
X. M. Tang ◽  
C. H. Cheng ◽  
M. N. Toksöz

The propagation of Stoneley waves in a fluid‐filled borehole with a vertical fracture is investigated both theoretically and experimentally. The borehole propagation excites fluid motion in the fracture and the resulting fluid flow at the fracture opening perturbs the fluid‐solid interface boundary condition at the borehole wall. By developing a boundary condition perturbation technique for the borehole situation, we studied the effect of this change in the boundary condition on the Stoneley propagation. Cases of both hard and soft formations have been investigated. The fracture has minimal effects on the Stoneley velocity, except in the very low frequency range in which the Stoneley velocity drastically decreases with decreasing frequency. Significant Stoneley‐wave attenuation is produced because of the energy dissipation into the fracture. The quantitative behavior of these effects depends not only on fracture aperture and borehole radius, but also on the acoustic properties of the formation and fluid. Ultrasonic experiments were performed to measure Stoneley propagation in laboratory fracture borehole models. Aluminum and lucite were used to simulate a hard and a soft formation, respectively. Array data for wave propagation were obtained and were processed using Prony’s method to give velocity and attenuation of Stoneley waves as a function of frequency. In both hard and soft formation cases, the experimental results agreed with the theoretical predictions. The important result of this study is that it presents a quantitative relationship between the Stoneley propagation and the fracture character in conjunction with formation and fluid properties. This relationship provides a method for estimating the characteristics of a vertical fracture by means of Stoneley wave measurements.


Geophysics ◽  
2019 ◽  
Vol 84 (4) ◽  
pp. WA1-WA10 ◽  
Author(s):  
Xiumei Zhang ◽  
Tobias M. Müller

Stoneley waves induce fluid pressure gradients in a permeable formation surrounding the borehole. These gradients are equilibrated through pressure diffusion, that is to say, slow P-waves in the context of Biot’s poroelasticity theory. Because slow P-waves are strongly sensitive to the formation permeability, the Stoneley-slow P-wave interaction can be used to retrieve the formation permeability from the attenuation and dispersion of Stoneley waves. The accuracy of this established technique in high-permeability formations deteriorates when slow P-waves are not pure diffusion waves; hence, the permeability dependence is more complicated. This effect on Stoneley waves is captured by applying the Johnson-Koplik-Dashen dynamic permeability model. Their model depends on a viscous relaxation length. However, in the estimation of formation permeability from Stoneley waves, this parameter is typically not measured but is estimated from an empirical equation, wherein material properties and microstructural descriptors are lumped together. When the so-calculated relaxation length is erroneous, the inverted formation permeability from the Stoneley wave is not correct either. To overcome this limitation and to provide a versatile alternative, the dynamic permeability problem is reformulated within the viscosity-extended Biot framework. Its physical basis is the conversion scattering in random media from slow P- to slow S-waves. The correlation length of this so-called stochastic dynamic permeability model can be derived from pore-scale images, and it also captures the effect of pore interface roughness. This model is then combined with the simplified Biot-Rosenbaum model to predict Stoneley wave attenuation and dispersion. We have applied this hybrid model to interpret laboratory measurements for which the previously suggested choice of the viscous relaxation length does not provide an accurate prediction. The results indicate that the hybrid model can provide another approach to model Stoneley wave attenuation and dispersion across the entire frequency range.


Sign in / Sign up

Export Citation Format

Share Document