Impact of Laboratory Testing Variability in Fracture Conductivity for Stimulation Effectiveness in Permian Deep Coal Source Rocks, Cooper Basin, South Australia

2018 ◽  
Author(s):  
Samuel A. Fraser ◽  
Raymond L. Johnson Jr.
2012 ◽  
Vol 52 (2) ◽  
pp. 671
Author(s):  
Sandra Menpes ◽  
Tony Hill

Recent off-structure drilling in the Nappamerri Trough has confirmed the presence of gas saturation through most of the Permian succession, including the Roseneath and Murteree shales. Basin-centred gas, shale gas and deep CSG plays in the Cooper Basin are now the focus of an escalating drilling and evaluation campaign. The Permian succession in the Nappamerri Trough is up to 1,000 m thick, comprising very thermally mature, gas-prone source rocks with interbedded sands—ideal for the creation of a basin-centred gas accumulation. Excluding the Murteree and Roseneath shales, the succession comprises up to 45% carbonaceous and silty shales and thin coals deposited in flood plain, lacustrine and coal swamp environments. The Early Permian Murteree and Roseneath shales are thick, generally flat lying, and laterally extensive, comprising siltstones and mudstones deposited in large and relatively deep freshwater lakes. Total organic carbon values average 3.9% in the Roseneath Shale and 2.4% in the Murteree Shale. The shales lie in the wet gas window (0.95–1.7% Ro) or dry gas window (>1.7% Ro) over much of the Cooper Basin. Thick Permian coals in the deepest parts of the Patchawarra Trough and over the Moomba high on the margin of the Nappamerri Trough are targets for deep CSG. Gas desorption analysis of a thick Patchawarra coal seam returned excellent total raw gas results averaging 21.2 scc/g (680 scf/ton) across 10 m. Scanning electron microscopy has shown that the coals contain significant microporosity.


2001 ◽  
Vol 41 (1) ◽  
pp. 185 ◽  
Author(s):  
R.R. Hillis ◽  
J.G.G. Morton ◽  
D.S. Warner ◽  
R.K. Penney

Deep basin hydrocarbon accumulations have been widely recognised in North America and include the giant fields of Elmworth and Hoadley in the Western Canadian Basin. Deep basin accumulations are unconventional, being located downdip of water-saturated rocks, with no obvious impermeable barrier separating them. Gas accumulations in the Nappamerri Trough, Cooper Basin, exhibit several characteristics consistent with North American deep basin accumulations. Log evaluation suggests thick gas columns and tests have recovered only gas and no water. The resistivity of the entire rock section exceeds 20 Ωm over large intervals, and, as in known deep basin accumulations, the entire rock section may contain gas. Gas in the Nappamerri Trough is located within overpressured compartments which witness the hydraulic isolation necessary for gas saturation outside conventional closure. Furthermore, the Nappamerri Trough, like known deep basin accumulations, has extensive, coal-rich source rocks capable of generating enormous hydrocarbon volumes. The above evidence for a deep basin-type gas accumulation in the Nappamerri Trough is necessarily circumstantial, and the existence of a deep gas accumulation can only be proven unequivocally by drilling wells outside conventional closure.Exploration for deep basin-type accumulations should focus on depositional-structural-diagenetic sweet spots (DSDS), irrespective of conventional closure. This is of particular significance for a potential Nappamerri Trough deep basin accumulation because depositional models suggest that the best net/gross may be in structural lows, inherited from syndepositional lows, that host stacked channel sands within channel belt systems. Limiting exploration to conventionally-trapped gas may preclude intersection with such sweet spots.


2011 ◽  
Vol 51 (2) ◽  
pp. 718
Author(s):  
Anthony Hill ◽  
Sandra Menpes ◽  
Guillaume Backè ◽  
Hani Khair ◽  
Arezoo Siasitorbaty

Potential shale gas bearing basins in SA are primarily dominated by thermogenic play types and span the Neoproterozoic to Cretaceous. Whilst companies have only recently commenced exploring for shale gas in the Permian Cooper Basin, strong gas shows have been routinely observed and recorded since exploration commenced in the basin in 1959. The regionally extensive Roseneath and Murteree shales represent the primary exploration focus and reach maximum thicknesses of 103 m and 86 m respectively with TOC values up to 9%. These shales are in the gas window in large parts of the basin, particularly in the Patchawarra and Nappamerri troughs. Outside the Cooper Basin, thick shale sequences in the Crayfish Subgroup of the Otway Basin, in particular the Upper and Lower Sawpit shales and to a lesser extent the Laira Formation, have good shale gas potential in the deeper portions of the basin. TOC averages up to 3% are recorded in these shales in the Penola Trough; maturities in the range of 1.3–1.5% have been modelled. Thick Permian marine shales of the Arckaringa Basin have excellent source rock characteristics, with TOC’s ranging 4.1–7.4% and averaging 5.2% over an interval exceeding 150 m in the Phillipson Trough; however, these Type II source rocks are not sufficiently mature for gas generation anywhere in the Arckaringa Basin. Shale gas has the potential to rival CSM in eastern Australia; its potential is now being explored in SA.


2018 ◽  
Vol 58 (2) ◽  
pp. 779
Author(s):  
Alexandra Bennett

The Patchawarra Formation is characterised by Permian aged fluvial sediments. The conventional hydrocarbon play lies within fluvial sandstones, attributed to point bar deposits and splays, that are typically overlain by floodbank deposits of shales, mudstones and coals. The nature of the deposition of these sands has resulted in the discovery of stratigraphic traps across the Western Flank of the Cooper Basin, South Australia. Various seismic techniques are being used to search for and identify these traps. High seismic reflectivity of the coals with the low reflectivity of the relatively thin sands, often below seismic resolution, masks a reservoir response. These factors, combined with complex geometry of these reservoirs, prove a difficult play to image and interpret. Standard seismic interpretation has proven challenging when attempting to map fluvial sands. Active project examples within a 196 km2 3D seismic survey detail an evolving seismic interpretation methodology, which is being used to improve the delineation of potential stratigraphic traps. This involves an integration of seismic processing, package mapping, seismic attributes and imaging techniques. The integrated seismic interpretation methodology has proven to be a successful approach in the discovery of stratigraphic and structural-stratigraphic combination traps in parts of the Cooper Basin and is being used to extend the play northwards into the 3D seismic area discussed.


2004 ◽  
Vol 49 (9) ◽  
pp. 69-74 ◽  
Author(s):  
J. Morran ◽  
M. Marchesan

Correct identification of specific tastes and odours in a water supply can be a powerful tool in identifying the cause of the problem and facilitating rapid remediation. While taste and odour identification can be achieved by laboratory testing, consumer involvement is not only worthwhile as a public education exercise but can also indicate tastes and odours to which the public do not object. Interpretation of taste and odour results is a complex process. The Australian Water Quality Centre (AWQC), based in Adelaide, South Australia, has established a flavour profile panel, trained in Flavour Profile Analysis (FPA). This group was chosen to carry out a survey of tastes and odours present in selected Australian water supplies and laboratory treated water and bottled water. The waters were also assessed by a group of untrained volunteers to simulate the responses of consumers. In two series of tests there were significant differences in responses between the groups with respect to the intensity of the tastes and odours detected. In both instances the responses by the trained group were more consistent, making interpretation of results more straightforward. In the second series of tests the panellists were also asked their personal preferences. The results showed in general the preferred waters were those with minimal taste and odour and this was generally irrespective of the type of taste and odour present.


2002 ◽  
Vol 42 (1) ◽  
pp. 65 ◽  
Author(s):  
P.C. Strong ◽  
G.R. Wood ◽  
S.C. Lang ◽  
A. Jollands ◽  
E. Karalaus ◽  
...  

Fluvial-lacustrine reservoirs in coal-bearing strata provide a particular challenge for reservoir characterisation because of the dominance of coal on the seismic signature and the highly variable reservoir geometry, quality and stratigraphic connectivity. Geological models for the fluvial gas reservoirs in the Permian Patchawarra Formation of the Cooper Basin are critical to minimise the perceived reservoir risks of these relatively deep targets. This can be achieved by applying high-resolution sequence stratigraphic concepts and finescaled seismic mapping. The workflow begins with building a robust regional chronostratigraphic framework, focussing on widespread lacustrine flooding surfaces and unconformities, tied to seismic scale reflectors. This framework is refined by identification of local surfaces that divide the Patchawarra Formation into high-resolution genetic units. A log facies scheme is established based on wireline log character, and calibrated to cores and cuttings, supported by analogue studies, such as the modern Ob River system in Western Siberia. Stacking patterns within each genetic unit are used to determine depositional systems tracts, which can have important reservoir connectivity implications. This leads to the generation of log signature maps for each interval, from which palaeogeographic reconstructions are generated. These maps are drawn with the guiding control of syn-depositional structural features and net/ gross trends. Estimates of fluvial channel belt widths are based on modern and ancient analogues. The resultant palaeogeography maps are used with structural and production data to refine play concepts, as a predictive tool to locate exploration and development drilling opportunities, to assess volumetrics, and to improve drainage efficiency and recovery during production of hydrocarbons.


2002 ◽  
Vol 42 (1) ◽  
pp. 259 ◽  
Author(s):  
G.J. Ambrose ◽  
K. Liu ◽  
I. Deighton ◽  
P.J. Eadington ◽  
C.J. Boreham

The northern Pedirka Basin in the Northern Territory is sparsely explored compared with its southern counterpart in South Australia. Only seven wells and 2,500 km of seismic data occur over a prospective area of 73,000 km2 which comprises three stacked sedimentary basins of Palaeozoic to Mesozoic age. In this area three petroleum systems have potential related to important source intervals in the Early Jurassic Eromanga Basin (Poolowanna Formation), the Triassic Simpson Basin (Peera Peera Formation) and Early Permian Pedirka Basin (Purni Formation). They are variably developed in three prospective depocentres, the Eringa Trough, the Madigan Trough and the northern Poolowanna Trough. Basin modelling using modern techniques indicate oil and gas expulsion responded to increasing early Late Cretaceous temperatures in part due to sediment loading (Winton Formation). Using a composite kinetic model, oil and gas expulsion from coal rich source rocks were largely coincident at this time, when source rocks entered the wet gas maturation window.The Purni Formation coals provide the richest source rocks and equate to the lower Patchawarra Formation in the Cooper Basin. Widespread well intersections indicate that glacial outwash sandstones at the base of the Purni Formation, herein referred to as the Tirrawarra Sandstone equivalent, have regional extent and are an important exploration target as well as providing a direct correlation with the prolific Patchawarra/Tirrawarra petroleum system found in the Cooper Basin.An integrated investigation into the hydrocarbon charge and migration history of Colson–1 was carried out using CSIRO Petroleum’s OMI (Oil Migration Intervals), QGF (Quantitative Grain Fluorescence) and GOI (Grains with Oil Inclusions) technologies. In the Early Jurassic Poolowanna Formation between 1984 and 2054 mRT, elevated QGF intensities, evidence of oil inclusions and abundant fluorescing material trapped in quartz grains and low displacement pressure measurements collectively indicate the presence of palaeo-oil and gas accumulation over this 70 m interval. This is consistent with the current oil show indications such as staining, cut fluorescence, mud gas and surface solvent extraction within this reservoir interval. Multiple hydrocarbon migration pathways are also indicated in sandstones of the lower Algebuckina Sandstone, basal Poolowanna Formation and Tirrawarra Sandstone equivalent. This is a significant upgrade in hydrocarbon prospectivity, given previous perceptions of relatively poor quality and largely immature source rocks in the Basin.Conventional structural targets are numerous, but the timing of hydrocarbon expulsion dictates that those with an older drape and compaction component will be more prospective than those dominated by Tertiary reactivation which may have resulted in remigration or leakage. Preference should also apply to those structures adjacent to generative source kitchens on relatively short migration pathways. Early formed stratigraphic traps at the level of the Tirrawarra Sandstone equivalent and Poolowanna Formation are also attractive targets. Cyclic sedimentation in the Poolowanna Formation results in two upward fining cycles which compartmentalise the sequence into two reservoir–seal configurations. Basal fluvial sandstone reservoirs grade upwards into topset shale/coal lithologies which form effective semi-regional seals. Onlap of the basal cycle onto the Late Triassic unconformity offers opportunities for stratigraphic entrapment.


1989 ◽  
Vol 29 (1) ◽  
pp. 417 ◽  
Author(s):  
S. Laing ◽  
C.N. Dee ◽  
P.W. Best

The Otway Basin covers an area of some 150 000 km2 both onshore and offshore southwestern Victoria and southeastern South Australia. Exploration within the basin is at a moderately mature stage by Australian standards (though immature by world standards), with a well density of one per 1500 km2, including offshore areas.Formation of the Otway Basin commenced in the late Jurassic with the initiation of rifting between Australia and Antarctica. As rifting continued, a number of depositional cycles occurred. Initial deposition comprised fluvio- lacustrine sediments, followed by marine transgressions and associated regressive deltaic cycles. As subsidence continued into the Late Tertiary, a series of marine carbonates and marls were deposited. The Otway Basin is structurally complex as a result of the superposition of a number of tectonic events which occurredboth during and after the development of the basin.The Otway Basin is a proven gas province, with commercial production at Caroline 1 (carbon dioxide) and North Paaratte Field (methane). Although no commercial oil production has yet been established in the basin, oil has been recovered at Port Campbell 4, Lindon 1 and Windermere 1. The presence of excellent reservoir units within the basin, mature source rocks and adequate seals, together with a number of untested play types and favourable economics, augurs well for the prospectivity of the Otway Basin.


Sign in / Sign up

Export Citation Format

Share Document