Drilling Performance Improvement in Marcellus Shale Play: A Case Study of Successful Implementation of Real-Time Digital Solution

2018 ◽  
Author(s):  
Andrew Rimmey ◽  
George Han ◽  
Asha Poojari ◽  
Harnam Atwal
Keyword(s):  
Real Time ◽  
Performance Improvement ◽  
Marcellus Shale ◽  
Successful Implementation ◽  
Drilling Performance

Yetagun Field Development ERD- Drilling Performance Improvement Case Study

2018 ◽  
Author(s):  
Azizul Atemin ◽  
M. Nor Rafie Jainuddin ◽  
Chongyew Ong
Keyword(s):  
Performance Improvement ◽  
Field Development ◽  
Drilling Performance

scholarly journals An Internet of Things Approach for Water Efficiency: A Case Study of the Beverage Factory

2021 ◽  
Vol 13 (6) ◽  
pp. 3343 ◽  
Author(s):  
Sandeep Jagtap ◽  
George Skouteris ◽  
Vilendra Choudhari ◽  
Shahin Rahimifard ◽  
Linh Nguyen Khanh Duong
Keyword(s):  
Internet Of Things ◽  
Real Time ◽  
Monitoring System ◽  
Water Saving ◽  
Water Monitoring ◽  
Successful Implementation ◽  
Water Usage ◽  
Food Manufacturing ◽  
Daily Water

There is a lack of knowledge among food manufacturers about adopting the Internet of Things (IoT)-based water monitoring system and its ability to support water minimisation activities. It is therefore necessary to investigate the applicability of IoT-based real-time water monitoring systems in a real food manufacturing environment to pursue water-saving opportunities accordingly. This article aims to propose an architecture of an IoT-based water-monitoring system needed for real-time monitoring of water usage, and address any water inefficiencies within food manufacturing. This article looks at a study conducted in a food beverage factory where an IoT-based real-time water monitoring system is implemented to analyse the complete water usage in order to devise solutions and address water overconsumption/wastage during the manufacturing process. The successful implementation of an IoT-based real-time water monitoring system offered the beverage factory a detailed analysis of the water consumption and insights into the water hotspots that needed attention. This action initiated several water-saving project opportunities, which contributed to the improvement of water sustainability and led to an 11% reduction in the beverage factory’s daily water usage.

Implementation of a Fully Automated Real-Time Torque and Drag Model for Improving Drilling Performance: Case Study

2018 ◽  
Author(s):  
Mojtaba Shahri ◽  
Timothy Wilson ◽  
Taylor Thetford ◽  
Brian Nelson ◽  
Michael Behounek ◽  
...  
Keyword(s):  
Real Time ◽  
Drag Model ◽  
Drilling Performance

Strengthening the Pay-Performance Link in Government: A Case Study of Korea

2002 ◽  
Vol 31 (4) ◽  
pp. 447-463 ◽  
Author(s):  
Pan S. Kim
Keyword(s):  
Performance Improvement ◽  
Performance Measures ◽  
Cultural Transformation ◽  
Substantial Improvement ◽  
Successful Implementation ◽  
Government Employees ◽  
Global Competitiveness ◽  
And Performance ◽  
Current Experience

In the era of globalization and borderless economies, performance improvement is not an option. It is a must for enhancing government's global competitiveness. Quality and performance of government employees need substantial improvement. In that regard, this study focuses on how performance-related pay (PRP) strategies strengthen the pay-performance link. Establishing PRP programs in government seems to be a good idea, but the Korean government's current experience with PRP shows a number of limitations. Recently, PRP and performance measures faced serious criticism from government employees for various reasons. PRP and performance measures must be improved in order to alleviate complaints and dissatisfaction. Cultural transformation, in particular, must occur for successful implementation of PRP measures.

Achieving Injectivity Optimization and Zonal Rates Allocation through Multi-Zone Intelligent Completion Technology – A Field B Case Study from Offshore Malaysia

2021 ◽  
Author(s):  
Fuziana Tusimin ◽  
Latief Riyanto ◽  
Nurul Aula A'akif Fadzil ◽  
Nur Syazana Sadan ◽  
Asba Mazidah Abu Bakar ◽  
...  
Keyword(s):  
Real Time ◽  
Pressure Support ◽  
Water Injection ◽  
Injection Rate ◽  
Fluid Distribution ◽  
Successful Implementation ◽  
Reservoir Pressure ◽  
Well Completion ◽  
Ic Technology

Abstract Properly distributing injected fluid to provide injection conformance and reservoir pressure support into the respective zones of interest in mature fields can be challenging. This challenge, with injection fluid distribution, is typically encountered in fields with high contrast in permeability, reservoir pressure, and injectivity indexes among individual zones. Deployment of intelligent completion (IC) technology to address this challenge has rapidly increased, especially in multi-zone water injector wells, due to its capabilities for real-time reservoir monitoring and control of the fluid injected into multiple zones without requiring well interventions. This paper presents a case study of successful installation of IC technology in two water injector wells in Field B offshore Sarawak. The main objective of the IC implementation is to provide an efficient water-injection method for pressure support to the nearby oil producers and counteract the gas expansion through water injection at the flank area. Water injection implementation using the IC approach can further develop the oil rims and improve oil recovery in the particular reservoir to extend the field's production life. The custom tailored inflow control valve (ICV) design is robust enough to provide control of desired zonal injection rates. Each well was installed with two sets of ICVs to control the injection rate for each dedicated zone as well as a real-time permanent downhole gauge (PDG) to monitor the pressure drop across the ICV for zonal rates allocation / analysis. Apart from conceptual and detailed engineering study of the applied IC technology, proper downhole equipment selection and integration with surface facilities are also crucial to ensure successful implementation of the IC system as a holistic solution to achieve the injection objective. Post well completion installation, a water injectivity test was performed in both the selective and commingle injection modes. During selective injection testing, different positions of the ICV were manipulated and the water injection rate was monitored. This testing approach was performed for each ICV in the well. Post selective injection testing, commingle testing was conducted at the base 9,000 bwpd and maximum injection target of 18,000 bwpd, in which the testing was successfully executed to achieve the maximum well target injection rate. This paper shall discuss the reservoir management strategy through deployment of the water injectors, conceptual well completion design, and multi-zone injectivity requirements. Details such as ICV design using pre-drill and post-drill information, final well completion strategy, pre-installation preparation, installation optimization, execution of the IC deployment, injectivity test procedure, and results are discussed as well.

Sign in / Sign up

Export Citation Format

Share Document