Chemical Formulation Design in High Salinity, High Temperature Carbonate Reservoir for a Super Giant Offshore Field in Middle East

2017 ◽  
Author(s):  
Muhammad Y. Jabbar ◽  
Alunood Al Sowaidi ◽  
Amna Al Obeidli ◽  
Thomas W. Willingham ◽  
Chris Britton ◽  
...  
Keyword(s):  
High Temperature ◽  
Middle East ◽  
High Salinity ◽  
Carbonate Reservoir ◽  
Formulation Design ◽  
Offshore Field

Analysis of the World's First Polymer Injectivity Test in a Carbonate Reservoir Under Extreme Harsh Conditions in ADNOC's Reservoirs

2021 ◽  
Author(s):  
Juan Manuel Leon ◽  
Shehadeh K. Masalmeh ◽  
Siqing Xu ◽  
Ali M. AlSumaiti ◽  
Ahmed A. BinAmro ◽  
...  
Keyword(s):  
High Temperature ◽  
Laboratory Experiments ◽  
High Salinity ◽  
Laboratory Data ◽  
Injection Pressure ◽  
Carbonate Reservoir ◽  
Experimental Program ◽  
Full Field ◽  
Harsh Conditions

Abstract Assessing polymer injectivity for EOR field applications is highly important and challenging. An excessive injectivity reduction during and after polymer injection may potentially affect the well integrity and recovery efficiency and consequently, injection strategy and the economics of the polymer projects. Moreover, well conditions such as skin, completion configuration, and injection water quality can significantly impact polymer injectivity. Additionally, the presence of fractures or micro-fractures may govern injection pressure. In contrast, historic field applications have shown that polymer injectivity is in general better than expected from simulations or laboratory data. In the laboratory experiments, the polymer injectivity has been evaluated by injection of significant amounts of pore volumes of polymer at relevant well-injection rates. In addition, several experiments were performed to measure the complex in-situ rheology expected to dominate the flow near the wellbore This paper presents the analysis of the the world's first polymer injectivity test (PIT) conducted in a high temperature and high salinity (HTHS) carbonate reservoir in Abu Dhabi as part of a comprehensive de-risking program for a new polymer-based EOR scheme proposed by ADNOC for these challenging carbonate reservoirs (see Masalmeh et. al., 2014). The de-risking program includes an extensive laboratory experimental program and field injectivity test to ensure that the identified polymer can be injected and propagated in the target formation before multi-well pilot and full-field implementation stages. Experimental laboratory data and the field injectivity test results are presented in earlier publications (Masalmeh et. al., 2019; Rachapudi et. al., 2020) and references therein. This PIT is the world's first polymer injectivity test in a carbonate reservoir under such harsh conditions of high salinity, high content of divalent ions and high temperature. In addition, the polymer used during the test has never been field-tested before. Therefore, the results of the PIT interpretation will help to de-risk the suitable polymer for the future inter-well pilot for the new proposed EOR Polymer-based scheme and it is a game-changer to unlock several opportunities for different Chemical EOR applications on full-field scale in other reservoirs with similar characteristics. A single well radial simulation model was built to integrate the surveillance data during PIT and the extensive laboratory experiments. Morever, multiple Pressure Fall Off Tests (PFOs) during the same periods were analyzed and intergaretd in the model.The study assessed the effect of polymer viscosity on mobility reduction, evaluated the polymer bank propagation, investigated the effect of the skin build-up, residual resistance factor (RRF) and shear effects on the well injectivity. Additionally, a comprehensive assisted history match method and robust simulation sensitivity analysis was implemented, thousands of sensitivity simulation runs were performed to capture several possible injection scenarios and validate laboratory parameters. The simulation study confirmed that the PIT could be interpreted using the laboratory-measured polymer parameters such as polymer bulk viscosity, in-situ rheology, RRF and adsorption.

Evolution of a Lab-Optimized ASP Formulation for a High Temperature and High Salinity World-Class Clastic Reservoir in the Middle East

2019 ◽  
Author(s):  
Mohammed T. Al-Murayri ◽  
Dawood S. Kamal ◽  
Hadeel F. Baroon ◽  
Gordon T. Shahin ◽  
Shunahshep R. Shukla
Keyword(s):  
High Temperature ◽  
Middle East ◽  
High Salinity ◽  
World Class ◽  
Clastic Reservoir

Development of Chemical EOR Formulations for a High Temperature and High Salinity Carbonate Reservoir

2013 ◽  
Author(s):  
Ming Han ◽  
Abdulkareem AlSofi ◽  
Alhasan Fuseni ◽  
Xianmin Zhou ◽  
Saleh Hassan
Keyword(s):  
High Temperature ◽  
High Salinity ◽  
Carbonate Reservoir ◽  
Chemical Eor

Development of Chemical EOR Formulations for a High Temperature and High Salinity Carbonate Reservoir

2013 ◽  
Author(s):  
Ming Han ◽  
Abdulkareem AlSofi ◽  
Alhasan Fuseni ◽  
Xianmin Zhou ◽  
Saleh Hassan
Keyword(s):  
High Temperature ◽  
High Salinity ◽  
Carbonate Reservoir ◽  
Chemical Eor

The First Successful Chemical EOR Pilot in the UAE: One Spot Pilot in High Temperature, High Salinity Carbonate Reservoir

2015 ◽  
Author(s):  
Omar Al-Amrie ◽  
Sophie Peltier ◽  
Adrian Pearce ◽  
Total Abu-Dhabi ◽  
Arafat Al-Yafei ◽  
...  
Keyword(s):  
High Temperature ◽  
High Salinity ◽  
Carbonate Reservoir ◽  
Chemical Eor
Sign in / Sign up

Export Citation Format

Share Document