An Innovative Approach of Nuclear Magnetic Resonance 2D-T1T2 to Identify Complex Reservoir Fluid Regime of Gas-Condensate in Newly Discovered & Fast Appraisal Carbonate Reservoir Field of Abu Dhabi, UAE.

2017 ◽  
Author(s):  
Maniesh Singh ◽  
Ibukun Bankole ◽  
Asma Aldahmani ◽  
Mona Alzeyoudi ◽  
Zaher Al Hajri ◽  
...  
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Magnetic Resonance ◽  
Carbonate Reservoir ◽  
Gas Condensate ◽  
Innovative Approach ◽  
Abu Dhabi ◽  
Fluid Regime ◽  
Reservoir Fluid ◽  
Nuclear Magnetic

Saturated carbon dioxide nanofluids enhanced oil recovery in carbonate reservoir cores using nuclear magnetic resonance

2021 ◽  
Author(s):  
Yongsheng Tan ◽  
Qi Li ◽  
Liang Xu ◽  
Xiaoyan Zhang ◽  
Tao Yu
Keyword(s):  
Carbon Dioxide ◽  
Nuclear Magnetic Resonance ◽  
Magnetic Resonance ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Residual Oil ◽  
Core Flooding ◽  
Nuclear Magnetic

<p>The wettability, fingering effect and strong heterogeneity of carbonate reservoirs lead to low oil recovery. However, carbon dioxide (CO<sub>2</sub>) displacement is an effective method to improve oil recovery for carbonate reservoirs. Saturated CO<sub>2</sub> nanofluids combines the advantages of CO<sub>2</sub> and nanofluids, which can change the reservoir wettability and improve the sweep area to achieve the purpose of enhanced oil recovery (EOR), so it is a promising technique in petroleum industry. In this study, comparative experiments of CO<sub>2</sub> flooding and saturated CO<sub>2</sub> nanofluids flooding were carried out in carbonate reservoir cores. The nuclear magnetic resonance (NMR) instrument was used to clarify oil distribution during core flooding processes. For the CO<sub>2</sub> displacement experiment, the results show that viscous fingering and channeling are obvious during CO<sub>2</sub> flooding, the oil is mainly produced from the big pores, and the residual oil is trapped in the small pores. For the saturated CO<sub>2</sub> nanofluids displacement experiment, the results show that saturated CO<sub>2</sub> nanofluids inhibit CO<sub>2</sub> channeling and fingering, the oil is produced from the big pores and small pores, the residual oil is still trapped in the small pores, but the NMR signal intensity of the residual oil is significantly reduced. The final oil recovery of saturated CO<sub>2</sub> nanofluids displacement is higher than that of CO<sub>2</sub> displacement. This study provides a significant reference for EOR in carbonate reservoirs. Meanwhile, it promotes the application of nanofluids in energy exploitation and CO<sub>2</sub> utilization.</p>

Static Measurements Enhance Saturation and Permeability Interpretation

2021 ◽  
Vol 73 (08) ◽  
pp. 46-47
Author(s):  
Chris Carpenter
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Magnetic Resonance ◽  
Water Saturation ◽  
Data Gathering ◽  
Abu Dhabi ◽  
Rock Properties ◽  
Well Test ◽  
Reservoir Properties ◽  
Nuclear Magnetic

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 202683, “Marrying the Static and Dynamic Worlds: Enhancing Saturation and Permeability Interpretation Using a Combination of Multifrequency Dielectric, Nuclear Magnetic Resonance, and Wireline Formation Testers,” by Hassan Mostafa, Ghassan Al-Jefri, SPE, and Tania Felix Menchaca, SPE, ADNOC, et al., prepared for the 2020 Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, held virtually 9–12 November. The paper has not been peer reviewed. Accurate water saturation evaluation and permeability profiling are crucial factors in determining volumetrics and productivity of multiple, stacked carbonate reservoirs offshore Abu Dhabi and derisking reservoir management. The case study presented in the complete paper illustrates how the integration of static measurements, such as dielectric dispersion and nuclear magnetic resonance (NMR) with dynamic measurements improves understanding of reservoir properties and supports more-accurate reservoir evaluation. Sampling and downhole fluid analysis (DFA) performed by wireline formation tester (WFT) identifies the fluid and rock properties in various flow units. Field Background and Challenges Optimal field development requires accurate estimations of water saturation and permeability. In this greenfield, the hydrocarbon is generally oil (medium to light) with very low asphaltene content. Overall, the reservoir quality is controlled by a combination of depositional environment, sequence stratigraphy, and diagenesis. Some reservoirs have good porosity, but reconciliation of log-based water saturation results with well-test results has been an issue. The objective in this case study was to drill a pilot hole for data gathering in a poorly characterized field location. Phase I included drilling a hole with a 55° deviation to cover all reservoirs for data gathering only, with the openhole reservoir section then being plugged and abandoned. Phase II of the plan was to sidetrack and complete the well as dual water-injector boreholes. In the reservoir section of the pilot borehole, a variety of logs was acquired for evaluation, including both logging-while-drilling and wireline measurements. While drilling, triple- combination data were acquired, consisting of gamma ray, resistivity, and nuclear logs (density neutron) along with resistivity images. The wireline-logging program was carried out in two stages to avoid differential sticking. In the first stage, the WFT was used to acquire 10 pressure points, seven points in the first reservoir and three points in the second. Two DFA stations were also recorded in Zone 1 to confirm whether the oil/water contact was deeper than expected. Logging was conducted using a high-tension wireline cable, which facilitates quicker accessibility to the openhole sections. In the second stage, multiple wireline runs were performed for the formation evaluation of the complete section, followed by the WFT pressure and fluid-sampling run on the drillpipe conveyance. Another critical challenge was to obtain accurate water saturations in the heterogeneous, minor, thin reservoirs, which are bounded by dense layers above and below and cause shoulder-bed effects. The third challenge in this well was to obtain an accurate, continuous, and representative permeability profile for the multiple reservoirs. WFT mini-drillstem test (DST) stations along with NMR logs were used to address this important requirement.

Nuclear Magnetic Resonance (NMR), A Valuable Tool for Tar detection in a Carbonate Formation of Abu Dhabi

2002 ◽  
Author(s):  
Walid Najia ◽  
Mohammad Shaban ◽  
Hedhili Gossa ◽  
Paolo Ferraris ◽  
Vissapragada Badarinadh ◽  
...  
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Magnetic Resonance ◽  
Abu Dhabi ◽  
Carbonate Formation ◽  
Nuclear Magnetic
Sign in / Sign up

Export Citation Format

Share Document