3-D Visual Experiments on Fluid Flow Behavior of Water Flooding and Gas Flooding in Fractured-Vuggy Carbonate Reservoir

2017 ◽  
Author(s):  
Ming Qu ◽  
Jirui Hou ◽  
Fenglan Zhao ◽  
Zhaojie Song ◽  
Shixi Ma ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Flow Behavior ◽  
Carbonate Reservoir ◽  
Water Flooding ◽  
Gas Flooding

scholarly journals Study on Fluid Behaviors of Foam-Assisted Nitrogen Flooding on a Three-Dimensional Visualized Fracture–Vuggy Model

2021 ◽  
Vol 11 (23) ◽  
pp. 11082
Author(s):  
Ming Qu ◽  
Tuo Liang ◽  
Jirui Hou
Keyword(s):  
Three Dimensional ◽  
Northwest China ◽  
Carbonate Reservoir ◽  
Water Flooding ◽  
Residual Oil ◽  
Sweep Efficiency ◽  
Nitrogen Gas ◽  
Gas Flooding ◽  
Oil Water ◽  
Gas Channeling

Tahe Oilfield, located in northwest China, is an unconventional fracture–vuggy carbonate reservoir. The foam-assisted nitrogen gas flooding technology has been proven to be a potential EOR technology. However, the flow behaviors of foam-assisted nitrogen gas in fracture–vuggy structures are not clear due to the complex fracture–vuggy structures and their strong heterogeneity. In this work, a three-dimensional visualized fracture–vuggy model is designed and fabricated to investigate the fluids behaviors of foam-assisted N2 flooding and classify the residual oil types after foam-assisted N2 flooding. Experimental results reveal that foam slug can enlarge the sweep efficiency, suppress the formation of nitrogen gas channeling, and detach the oil film. Additionally, the evolution processes of the gas–oil and oil–water interfaces are investigated and analyzed. Moreover, the residual oil types after foam-assisted N2 flooding and nitrogen gas flooding, respectively, are classified and summarized. Compared to nitrogen gas flooding after water flooding, 12.36% more oil can be recovered through foam-assisted N2 flooding. This work further studies the fluid flow behaviors of foam-assisted N2 in the three-dimensional visualized fracture–vuggy carbonate model and also confirms the previous achievements.

Capturing the Effect of Fracture Heterogeneity on Multiphase Flow During Fluid Injection

2013 ◽  
Vol 16 (02) ◽  
pp. 194-208 ◽  
Author(s):  
S.. Jonoud ◽  
O.P.. P. Wennberg ◽  
G.. Casini ◽  
J.A.. A. Larsen
Keyword(s):  
Fluid Flow ◽  
Multiphase Flow ◽  
Oil Recovery ◽  
Large Scale ◽  
Flow Behavior ◽  
Fractured Reservoirs ◽  
Scale Up ◽  
Carbonate Reservoir ◽  
Fracture Model ◽  
Dynamic Simulations

Summary Carbonate fractured reservoirs introduce a tremendous challenge to the upscaling of both single- and multiphase flow. The complexity comes from both heterogeneous matrix and fracture systems in which the separation of scales is very difficult. The mathematical upscaling techniques, derived from representative elementary volume (REV), must therefore be replaced by a more realistic geology-based approach. In the case of multiphase flow, an evaluation of the main forces acting during oil recovery must also be performed. A matrix-sector model from a highly heterogeneous carbonate reservoir is linked to different fracture realizations in dual-continuum simulations. An integrated iterative workflow between the geology-based static modeling and the dynamic simulations is used to investigate the effect of fracture heterogeneity on multiphase fluid flow. Heterogeneities at various scales (i.e., diffuse fractures and subseismic faults) are considered. The diffuse-fracture model is built on the basis of facies and porosity from the matrix model together with core data, image-log data, and data from outcrop-analogs. Because of poor seismic data, the subseismic-fault model is mainly conceptual and is based on the analysis of outcrop-analog data. Fluid-flow simulations are run for both single-phase and multiphase flow and gas and water injections. A better understanding of fractured-reservoirs behavior is achieved by incorporating realistic fracture heterogeneity into the geological model and analyzing the dynamic impact of fractures at various scales. In the case of diffuse fractures, the heterogeneity effect can be captured in the upscaled model. The subseismic faults, however, must be explicitly represented, unless the sigma (shape) factor is included in the upscaling process. A local grid-refinement approach is applied to demonstrate explicit fractures in large-scale simulation grids. This study provides guidelines on how to effectively scale up a heterogeneous fracture model and still capture the heterogeneous flow behavior.

scholarly journals Pore-Scale Simulation of Particle Flooding for Enhancing Oil Recovery

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2305
Author(s):  
Xiangbin Liu ◽  
Le Wang ◽  
Jun Wang ◽  
Junwei Su
Keyword(s):  
Oil Recovery ◽  
Flow Behavior ◽  
Ct Scanning ◽  
Water Flooding ◽  
Pore Scale ◽  
Simulation Techniques ◽  
Three Phase ◽  
Remaining Oil ◽  
Three Phase Flow ◽  
Displacement Force

The particles, water and oil three-phase flow behaviors at the pore scale is significant to clarify the dynamic mechanism in the particle flooding process. In this work, a newly developed direct numerical simulation techniques, i.e., VOF-FDM-DEM method is employed to perform the simulation of several different particle flooding processes after water flooding, which are carried out with a porous structure obtained by CT scanning of a real rock. The study on the distribution of remaining oil and the displacement process of viscoelastic particles shows that the capillary barrier near the location with the abrupt change of pore radius is the main reason for the formation of remaining oil. There is a dynamic threshold in the process of producing remaining oil. Only when the displacement force exceeds this threshold, the remaining oil can be produced. The flow behavior of particle–oil–water under three different flooding modes, i.e., continuous injection, alternate injection and slug injection, is studied. It is found that the particle size and the injection mode have an important influence on the fluid flow. On this basis, the flow behavior, pressure characteristics and recovery efficiency of the three injection modes are compared. It is found that by injecting two kinds of fluids with different resistance increasing ability into the pores, they can enter into different pore channels, resulting in the imbalance of the force on the remaining oil interface and formation of different resistance between the channels, which can realize the rapid recovery of the remaining oil.

scholarly journals Analysis of Fracture Roughness Control on Permeability Using SfM and Fluid Flow Simulations: Implications for Carbonate Reservoir Characterization

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-19 ◽  
Author(s):  
Miller Zambrano ◽  
Alan D. Pitts ◽  
Ali Salama ◽  
Tiziano Volatili ◽  
Maurizio Giorgioni ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Reservoir Characterization ◽  
Flow Simulation ◽  
Carbonate Reservoir ◽  
Single Fracture ◽  
Parallel Plates ◽  
Surface Mapping ◽  
Navier Stokes Equation ◽  
Hydraulic Aperture ◽  
Fracture Modeling

Fluid flow through a single fracture is traditionally described by the cubic law, which is derived from the Navier-Stokes equation for the flow of an incompressible fluid between two smooth-parallel plates. Thus, the permeability of a single fracture depends only on the so-called hydraulic aperture which differs from the mechanical aperture (separation between the two fracture wall surfaces). This difference is mainly related to the roughness of the fracture walls, which has been evaluated in previous works by including a friction factor in the permeability equation or directly deriving the hydraulic aperture. However, these methodologies may lack adequate precision to provide valid results. This work presents a complete protocol for fracture surface mapping, roughness evaluation, fracture modeling, fluid flow simulation, and permeability estimation of individual fracture (open or sheared joint/pressure solution seam). The methodology includes laboratory-based high-resolution structure from motion (SfM) photogrammetry of fracture surfaces, power spectral density (PSD) surface evaluation, synthetic fracture modeling, and fluid flow simulation using the Lattice-Boltzmann method. This work evaluates the respective controls on permeability exerted by the fracture displacement (perpendicular and parallel to the fracture walls), surface roughness, and surface pair mismatch. The results may contribute to defining a more accurate equation of hydraulic aperture and permeability of single fractures, which represents a pillar for the modeling and upscaling of the hydraulic properties of a geofluid reservoir.

Effects of Nano-Nozzles Cross-Sectional Geometry on Fluid Flow: Molecular Dynamic Simulation

2017 ◽  
Vol 34 (5) ◽  
pp. 667-678 ◽  
Author(s):  
H. Nowruzi ◽  
H. Ghassemi
Keyword(s):  
Fluid Flow ◽  
Velocity Profile ◽  
Cross Sections ◽  
Md Simulation ◽  
Flow Behavior ◽  
Water Model ◽  
Physical Parameters ◽  
Cross Sectional ◽  
Behavior Characteristics ◽  
Fanning Friction Factor

AbstractNano-nozzles are an essential part of the nano electromechanical systems (NEMS). Cross-sectional geometry of nano-nozzles has a significant role on the fluid flow inside them. So, main purpose of the present study is related to the effects of different symmetrical cross-sections on the fluid flow behavior inside of nano-nozzles. To this accomplishment, five different cross-sectional geometries (equilateral triangle, square, regular hexagon, elliptical and circular) are investigated by using molecular dynamics (MD) simulation. In addition, TIP4P is used for atomistic water model. In order to evaluate the fluid flow behavior, non-dimensional physical parameters such as Fanning friction factor, velocity profile and density number are analyzed. Obtained results are shown that the flow behavior characteristics appreciably depend on the geometry of nano-nozzle's cross-section. Velocity profile and density number for five different cross sections of nano-nozzle at three various measurement gauges are presented and discussed.

In Vitro Stain Transport in Canaliculi of Rat Femora Under Cyclic Loading

2000 ◽  
Author(s):  
Bixia Li ◽  
Timothy L. Norman
Keyword(s):  
Fluid Flow ◽  
Cyclic Loading ◽  
Confocal Microscopy ◽  
Mechanical Loading ◽  
Cyclic Load ◽  
Flow Behavior ◽  
Load Level ◽  
Static Conditions ◽  
Rat Bone

Abstract In this study, rat femurs were used to test the diffusion and mechanical transport properties of a fluroscein stain tracer in microvessels of bone. Fluroscein was used as a tracer to visualize the fluid flow behavior using confocal microscopy. It was found that stain transport occurs due to diffusion under static conditions and due to mechanical loading. The transport increased with cyclic load level and frequency. Our results also show that stain transport at the canaliculi level occurs rapidly in rat bone.

Sign in / Sign up

Export Citation Format

Share Document