Beam Pump Design for Steam Stimulation Heavy Oil Wells

2017 ◽  
Author(s):  
Akchay L. Pandit ◽  
Al-Bassam Abdul-Aziz Mohammad ◽  
Fajer Al-Salem ◽  
Yasser Mohamed Abdelaziz ◽  
Abdulaziz Najaf ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Oil Wells ◽  
Pump Design ◽  
Beam Pump ◽  
Steam Stimulation

Cyclic Gas/Steam Stimulation of Heavy-Oil Wells

1981 ◽  
Vol 33 (10) ◽  
pp. 1990-1998 ◽  
Author(s):  
Robert F. Meldau ◽  
Robert G. Shipley ◽  
Keith H. Coats
Keyword(s):  
Heavy Oil ◽  
Oil Wells ◽  
Stimulation Of ◽  
Steam Stimulation

Preventing Proppant and Formation-Sand Production in High Water Cut, Heavy-Oil Wells: A Field Study from Argentina

2009 ◽  
Author(s):  
Daniel Daparo ◽  
Luis Soliz ◽  
Eduardo Roberto Perez ◽  
Carlos Iver Vidal Saravia ◽  
Philip Duke Nguyen ◽  
...  
Keyword(s):  
Field Study ◽  
Heavy Oil ◽  
High Water ◽  
Oil Wells ◽  
Sand Production ◽  
High Water Cut ◽  
Water Cut

Producing Heavy Oil by Thermal Progressive Cavity Pumps in Steam Stimulation Process

2009 ◽  
Author(s):  
Shoujun Zhang ◽  
Liguo Zhong ◽  
Fujun Song ◽  
Baoshan Lang ◽  
Fei Wu ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Steam Stimulation

Industrial Application of Nickel Tallate Catalyst During Cyclic Steam Stimulation in Boca De Jaruco Reservoir

2021 ◽  
Author(s):  
Alexey V. Vakhin ◽  
Irek I. Mukhamatdinov ◽  
Firdavs A. Aliev ◽  
Dmitriy F. Feoktistov ◽  
Sergey A. Sitnov ◽  
...  
Keyword(s):  
Crude Oil ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Industrial Application ◽  
Laboratory Scale ◽  
Catalyst Precursor ◽  
Hydrothermal Conditions ◽  
Cyclic Steam Stimulation ◽  
Steam Stimulation

Abstract A nickel-based catalyst precursor has been synthesized for in-situ upgrading of heavy crude oil that is capable of increasing the efficiency of steam stimulation techniques. The precursor activation occurs due to the decomposition of nickel tallate under hydrothermal conditions. The aim of this study is to analyze the efficiency of in-situ catalytic upgrading of heavy oil from laboratory scale experiments to the field-scale implementation in Boca de Jaruco reservoir. The proposed catalytic composition for in-reservoir chemical transformation of heavy oil and natural bitumen is composed of oil-soluble nickel compound and organic hydrogen donor solvent. The nickel-based catalytic composition in laboratory-scale hydrothermal conditions at 300°С and 90 bars demonstrated a high performance; the content of asphaltenes was reduced from 22% to 7 wt.%. The viscosity of crude oil was also reduced by three times. The technology for industrial-scale production of catalyst precursor was designed and the first pilot batch with a mass of 12 ton was achieved. A «Cyclic steam stimulation» technology was modified in order to deliver the catalytic composition to the pay zones of Boca de Jaruco reservoir (Cuba). The active forms of catalyst precursors are nanodispersed mixed oxides and sulfides of nickel. The pilot test of catalyst injection was carried out in bituminous carbonate formation M, in Boca de Jaruco reservoir (Cuba). The application of catalytic composition provided increase in cumulative oil production and incremental oil recovery in contrast to the previous cycle (without catalyst) is 170% up to date (the effect is in progress). After injection of catalysts, more than 200 samples from production well were analyzed in laboratory. Based on the physical and chemical properties of investigated samples and considering the excellent oil recovery coefficient it is decided to expand the industrial application of catalysts in the given reservoir. The project is scheduled on the fourth quarter of 2021.

Rich-Gas Condensate Huff and Puff Process in High-Volume, Watered-Out, and Highly Viscous Heavy Oil Wells, Case Study in Iraq

2021 ◽  
Author(s):  
Xueqing Tang ◽  
Ruifeng Wang ◽  
Zhongliang Cheng ◽  
Hui Lu
Keyword(s):  
High Pressure ◽  
Heavy Oil ◽  
Oil Quality ◽  
Oil Wells ◽  
Gas Condensate ◽  
Oil Viscosity ◽  
Foamy Oil ◽  
Artificial Lift ◽  
Water Coning ◽  
The Dead

Abstract Halfaya field in Iraq contains multiple vertically stacked oil and gas accumulations. The major oil horizons at depth of over 10,000 ft are under primary development. The main technical challenges include downdip heavy oil wells (as low as 14.56 °API) became watered-out and ceased flow due to depleted formation pressure. Heavy crude, with surface viscosities of above 10,000 cp, was too viscous to lift inefficiently. The operator applied high-pressure rich-gas/condensate to re-pressurize the dead wells and resumed production. The technical highlights are below: Laboratory studies confirmed that after condensate (45-52ºAPI) mixed with heavy oil, blended oil viscosity can cut by up to 90%; foamy oil formed to ease its flow to the surface during huff-n-puff process.In-situ gas/condensate injection and gas/condensate-lift can be applied in oil wells penetrating both upper high-pressure rich-gas/condensate zones and lower oil zones. High-pressure gas/condensate injected the oil zone, soaked, and then oil flowed from the annulus to allow large-volume well stream flow with minimal pressure drop. Gas/condensate from upper zones can lift the well stream, without additional artificial lift installation.Injection pressure and gas/condensate rate were optimized through optimal perforation interval and shot density to develop more condensate, e.g. initial condensate rate of 1,000 BOPD, for dilution of heavy oil.For multilateral wells, with several drain holes placed toward the bottom of producing interval, operating under gravity drainage or water coning, if longer injection and soaking process (e.g., 2 to 4 weeks), is adopted to broaden the diluted zone in heavy oil horizon, then additional recovery under better gravity-stabilized vertical (downward) drive and limited water coning can be achieved. Field data illustrate that this process can revive the dead wells, well production achieved approximately 3,000 BOPD under flowing wellhead pressure of 800 to 900 psig, with oil gain of over 3-fold compared with previous oil rate; water cut reduction from 30% to zero; better blended oil quality handled to medium crude; and saving artificial-lift cost. This process may be widely applied in the similar hydrocarbon reservoirs as a cost-effective technology in Middle East.

Temperature Distribution of Steam Stimulation in Fractured Heavy Oil Reservoir Using Fractal-like Tree Branching Network

2013 ◽  
Vol 12 (23) ◽  
pp. 7250-7254
Author(s):  
Yue Ming ◽  
Zhu Weiyao ◽  
Song Hongqing ◽  
Lou Yu ◽  
Zhang Xueling ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Heavy Oil ◽  
Oil Reservoir ◽  
Heavy Oil Reservoir ◽  
Steam Stimulation
Sign in / Sign up

Export Citation Format

Share Document