An Investigation on Propagation Mechanisms of Steam Chamber during Expanding Solvent SAGP ES-SAGP in Thin Heavy Oil Reservoirs

2016 ◽  
Author(s):  
Zhanxi Pang ◽  
Lei Wang ◽  
Xiaocong Lv ◽  
Yongge Liu ◽  
Guanghuan Wu ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Oil Reservoirs ◽  
Steam Chamber ◽  
Heavy Oil Reservoirs

An Investigation Into Propagation Behavior of the Steam Chamber During Expanding-Solvent SAGP (ES-SAGP)

SPE Journal ◽  
2019 ◽  
Vol 24 (02) ◽  
pp. 413-430
Author(s):  
Zhanxi Pang ◽  
Lei Wang ◽  
Zhengbin Wu ◽  
Xue Wang
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Physical Simulation ◽  
Heat Losses ◽  
Oil Reservoirs ◽  
Oil Viscosity ◽  
Sweep Efficiency ◽  
Experimental Conditions ◽  
Steam Chamber ◽  
Heavy Oil Reservoirs

Summary Steam-assisted gravity drainage (SAGD) and steam and gas push (SAGP) are used commercially to recover bitumen from oil sands, but for thin heavy-oil reservoirs, the recovery is lower because of larger heat losses through caprock and poorer oil mobility under reservoir conditions. A new enhanced-oil-recovery (EOR) method, expanding-solvent SAGP (ES-SAGP), is introduced to develop thin heavy-oil reservoirs. In ES-SAGP, noncondensate gas and vaporizable solvent are injected with steam into the steam chamber during SAGD. We used a 3D physical simulation scale to research the effectiveness of ES-SAGP and to analyze the propagation mechanisms of the steam chamber during ES-SAGP. Under the same experimental conditions, we conducted a contrast analysis between SAGP and ES-SAGP to study the expanding characteristics of the steam chamber, the sweep efficiency of the steam chamber, and the ultimate oil recovery. The experimental results show that the steam chamber gradually becomes an ellipse shape during SAGP. However, during ES-SAGP, noncondensate gas and a vaporizable solvent gather at the reservoir top to decrease heat losses, and oil viscosity near the condensate layer of the steam chamber is largely decreased by hot steam and by solvent, making the boundary of the steam chamber vertical and gradually a similar, rectangular shape. As in SAGD, during ES-SAGP, the expansion mechanism of the steam chamber can be divided into three stages: the ascent stage, the horizontal-expansion stage, and the descent stage. In the ascent stage, the time needed is shorter during ES-SAGP than during SAGP. However, the other two stages take more time during nitrogen, solvent, and steam injection to enlarge the cross-sectional area of the bottom of the steam chamber. For the conditions in our experiments, when the instantaneous oil/steam ratio is lower than 0.1, the corresponding oil recovery is 51.11%, which is 7.04% higher than in SAGP. Therefore, during ES-SAGP, not only is the volume of the steam chamber sharply enlarged, but the sweep efficiency and the ultimate oil recovery are also remarkably improved.

Seismic characterization of heavy oil reservoir during thermal production: A case study

Geophysics ◽  
2017 ◽  
Vol 82 (1) ◽  
pp. B13-B27 ◽  
Author(s):  
Hemin Yuan ◽  
De-Hua Han ◽  
Weimin Zhang
Keyword(s):  
Heavy Oil ◽  
Rock Physics ◽  
Time Lapse ◽  
Steam Injection ◽  
Oil Reservoirs ◽  
Inversion Method ◽  
Oil Reservoir ◽  
Steam Chamber ◽  
Heavy Oil Reservoirs ◽  
Heavy Oil Reservoir

Heavy oil reservoirs are important alternative energy resources to conventional oil and gas reservoirs. However, due to the high viscosity, most production methods of heavy oil reservoirs involve thermal production. Heavy oil reservoirs’ properties change dramatically during thermal production because the viscosity drops drastically with increasing temperature. Moreover, the velocity and density also decrease after steam injection, leading to a longer traveltime of seismic velocities and low impedance of the steam chamber zone. These changes of properties can act as indicators of the steam chamber and can be detected through the time-lapse inversion method. We first establish the rock-physics relationship between oil sands’ impedance and temperature on the basis of our previous laboratory work. Then, we perform the forward modeling of the heavy oil reservoir with the steam chamber to demonstrate the influence of steam injection on seismic profiles. Then, we develop a modified-Cauchy prior-distribution-based time-lapse inversion method and perform a 2D model test. The inversion method is then applied on the real field data, and the results are analyzed. By combining the inverted impedance and rock-physics relation between impedance and temperature, the temperature distribution map is obtained, which can work as an indicator of steam chamber. Finally, an empirical relation between impedance and velocity is established, and velocity is derived from the impedance.

scholarly journals The Adverse Impact of Muddy Laminae on Conventional SAGD Performance and Improvement Strategy with the Multilateral Well Pattern

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Yang Yu ◽  
Shangqi Liu ◽  
Yu Bao ◽  
Lixia Zhang ◽  
Jia Xie ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Oil Sands ◽  
Oil Production ◽  
Oil Reservoirs ◽  
Adverse Impact ◽  
Peak Oil ◽  
Improvement Strategy ◽  
Steam Chamber ◽  
Well Pattern ◽  
Heavy Oil Reservoirs

With further progress of Steam-Assisted Gravity Drainage (SAGD) technology, a growing number of oil sands or heavy oil reservoirs were put into production in an efficient way. However, owing to the existence of muddy laminae within reservoirs, there are challenges associated with the expansion of the steam chamber and oil drainage during the SAGD process. The purpose of this study is to evaluate the adverse impact of muddy laminae on conventional SAGD performance and introduce an improvement strategy with multilateral well patterns to reduce the adverse impact and improve the performance. In the research reported here, the reservoir numerical simulation approach is applied to conduct the research. The analysis conducted on a prototypical reservoir reveals that the steam chamber may expand slowly in some sections due to the poor capacity of heat and mass transfer, and the expansion of the steam chamber is relatively uneven along the wellbore, when the muddy laminae are existing in the formation. The influence level of the muddy laminae on conventional SAGD performance under different distribution modes is different, but the adverse effect is mainly reflected in the delay of peak oil production, the decrease in peak oil production, the decrease in steam chamber volume, and the increase in the cumulative steam oil ratio (mainly in early and middle stages of the SAGD process). On the basis of aforementioned researches, the improvement strategy with two different multilateral well patterns, planar multilateral well and upward multilateral well, is introduced to improve the SAGD performance. The results indicate that the combination of a planar multilateral injector and planar multilateral producer has the best performance. By adopting such kind of combination, the recovery factor can be increased from 31.36% to 47.08%, and the cumulative steam oil ratio can be decreased from 5.29 m3/m3 to 4.64 m3/m3 under the combined distribution mode of muddy laminae. It can be known that the branches of the planar multilateral well are very helpful for the expansion of the steam chamber and oil drainage, once the heat connection between branches of the injector and producer is well established. Overall results show that the multilateral well pattern is promising for SAGD applications at oil sands or heavy oil reservoirs which are rich in muddy laminae.

Experimental study and numerical simulation of urea-assisted SAGD in developing exra-heavy oil reservoirs

2021 ◽  
Vol 201 ◽  
pp. 108436
Author(s):  
Daode Hua ◽  
Pengcheng Liu ◽  
Peng Liu ◽  
Changfeng Xi ◽  
Shengfei Zhang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Experimental Study ◽  
Heavy Oil ◽  
Oil Reservoirs ◽  
Heavy Oil Reservoirs
Sign in / Sign up

Export Citation Format

Share Document