Applying Horizontal Wells to Develop Oilfields with Complex Low Relief Structure in High Water Cut Stage in Tarapoa

2015 ◽  
Author(s):  
Haikuan Zhang ◽  
Xing Zhang ◽  
Xinjun Zhao ◽  
Quan Hu ◽  
Xuepeng Wan ◽  
...  
Keyword(s):  
Horizontal Wells ◽  
High Water ◽  
Relief Structure ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

Experimental Study of Reasonable Drawdown Pressure of Horizontal Wells in Oil Reservoir With Bottom Water

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Chuan Lu ◽  
Huiqing Liu ◽  
Qiang Zheng ◽  
Qingbang Meng
Keyword(s):  
Bottom Water ◽  
Physical Simulation ◽  
Horizontal Wells ◽  
High Water ◽  
Small Scale ◽  
Oil Reservoir ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
The Impact

For the development of oil reservoir with bottom water, it is significant to analyze the impact of drawdown pressures on post water breakthrough performance of horizontal wells. Based on a small-scale and discretized physical simulation system, the impact of different drawdown pressures and the influence of changing drawdown pressures in different water cut stage have been discussed. The results show that for thin oil with relatively high viscosity (87.8 mPa.s), keeping a relatively large drawdown pressure in medium and low water cut stage is reasonable. But enlarging drawdown pressure in high water cut stage is harmful to increase ultimate oil recovery. For oil with further lower viscosity (21.4 mPa.s), adopting a small drawdown pressure and increasing it in medium and high water cut stage is reasonable. For the heavy oil (124.1 mPa.s), it is acceptable to enlarge drawdown pressure under the condition of low water cut period.

scholarly journals Study on oil displacement efficiency of offshore sandstone reservoir with big bottom water

2021 ◽  
Author(s):  
Jie Tan ◽  
Ying-xian Liu ◽  
Yan-lai Li ◽  
Chun-yan Liu ◽  
Song-ru Mou
Keyword(s):  
Bottom Water ◽  
High Water ◽  
Displacement Efficiency ◽  
Oil Displacement ◽  
Oil Displacement Efficiency ◽  
Sandstone Reservoir ◽  
Sandstone Reservoirs ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

AbstractX oilfield is a typical sandstone reservoir with big bottom water in the Bohai Sea. The viscosity of crude oil ranges from 30 to 425 cp. Single sand development with the horizontal well is adopted. At present, the water content is as high as 96%. The water cut of the production well is stable for a long time in the high water cut period. The recoverable reserves calculated by conventional methods have gradually increased, and even the partial recovery has exceeded the predicted recovery rate. This study carried out an oil displacement efficiency experiment under big water drive multiple to accurately understand an extensive bottom water reservoir's production law in an ultra-high water cut stage. It comprehensively used the scanning electron microscope date, casting thin section, oil displacement experiment, and production performance to analyze the change law of physical properties and relative permeability curve from the aspects of reservoir clay minerals, median particle size, pore distribution, and pore throat characteristics. Therefore, the development law of horizontal production wells in sandstone reservoirs with big bottom water is understood. It evaluates the ultimate recovery of sandstone reservoirs with big bottom water. It provides a fundamental theoretical basis and guidance for dynamic prediction and delicate potential tapping of sandstone reservoirs with big bottom water at a high water cut stage.

scholarly journals New prediction method for transient productivity of fractured five-spot patterns in low permeability reservoirs at high water cut stages

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 499-508
Author(s):  
Chuanzhi Cui ◽  
Zhongwei Wu ◽  
Zhen Wang ◽  
Jingwei Yang ◽  
Yingfei Sui
Keyword(s):  
Prediction Method ◽  
Mass Conservation ◽  
High Water ◽  
Low Permeability ◽  
Element Analysis ◽  
Fracture Length ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Low Permeability Reservoirs

AbstractPredicting the productivity of fractured five-spot patterns in low permeability reservoirs at high water cut stages has an important significance for the development and optimization of reservoirs. Taking the reservoir heterogeneity and uneven distribution of the remaining oil into consideration, a novel method for predicting the transient productivity of fractured five-spot patterns in low permeability reservoirs at high water cut stages is proposed by using element analysis, the flow tube integration method, and the mass conservation principle. This new method is validated by comparing with actual production data from the field and the results of a numerical simulation. Also, the effects of related parameters on transient productivity are analyzed. The results show that increasing fracture length, pressure difference and reservoir permeability correspond to an increasing productivity. The research provides theoretical support for the development and optimization of fractured five-spot patterns at the high water cut stage.

Layer regrouping optimization for multilayer heterogeneous reservoirs at a high water cut stage

2019 ◽  
Vol 12 (15) ◽  
Author(s):  
Wu Zhongwei ◽  
Cui Chuanzhi ◽  
Japan Trivedi ◽  
Li Rongtao ◽  
Tang Wenhao ◽  
...  
Keyword(s):  
High Water ◽  
Heterogeneous Reservoirs ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

scholarly journals New Waterflooding Characteristic Curves Based on Cumulative Water Injection

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Zhiwang Yuan ◽  
Zhiping Li ◽  
Li Yang ◽  
Yingchun Zhang
Keyword(s):  
Characteristic Curve ◽  
Water Injection ◽  
Material Balance ◽  
Oil Production ◽  
High Water ◽  
Difficult Problem ◽  
Prediction Errors ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

When a conventional waterflooding characteristic curve (WFCC) is used to predict cumulative oil production at a certain stage, the curve depends on the predicted water cut at the predicted cutoff point, but forecasting the water cut is very difficult. For the reservoirs whose pressure is maintained by water injection, based on the water-oil phase seepage theory and the principle of material balance, the equations relating the cumulative oil production and cumulative water injection at the moderately high water cut stage and the ultrahigh water cut stage are derived and termed the Yuan-A and Yuan-B curves, respectively. And then, we theoretically analyze the causes of the prediction errors of cumulative oil production by the Yuan-A curve and give suggestions. In addition, at the ultrahigh water cut stage, the Yuan-B water cut prediction formula is established, which can predict the water cut according to the cumulative water injection and solve the difficult problem of water cut prediction. The application results show Yuan-A and Yuan-B curves are applied to forecast oil production based on cumulative water injection data obtained by the balance of injection and production, avoiding reliance on the water cut forecast and solving the problems of predicting the cumulative oil production of producers or reservoirs that have not yet shown the decline rule. Furthermore, the formulas are simple and convenient, providing certain guiding significance for the prediction of cumulative oil production and water cut for the same reservoir types.

Sign in / Sign up

Export Citation Format

Share Document