A New Method of Predicting the Well Performance of Multi-Frac Horizontal Wells

2015 ◽  
Author(s):  
Z. Shen ◽  
K. Ling ◽  
Y. Yip
Keyword(s):  
Horizontal Wells ◽  
New Method ◽  
Well Performance

A New Method for Designing 3D Trajectory in Sidetracking Horizontal Wells Under Multi-constraints

1999 ◽  
Author(s):  
Jiang Shengzong ◽  
Wang Xilu ◽  
Cao Limin ◽  
Liu Kunfang
Keyword(s):  
Horizontal Wells ◽  
New Method

The Effect of Well Azimuth or Don't Let Your Landman Plan Your Well Path!

2015 ◽  
Author(s):  
Fen Yang ◽  
Larry K. Britt ◽  
Shari Dunn-Norman
Keyword(s):  
Horizontal Well ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Horizontal Stress ◽  
Well Performance ◽  
Gas Reservoirs ◽  
Principal Stresses ◽  
Lateral Direction ◽  
Well Completion ◽  
Stimulation Of

Abstract Since the late 1980's when Maersk published their work on multiple fracturing of horizontal wells in the Dan Field, the use of transverse multiple fractured horizontal wells has become the completion of choice and become the “industry standard” for unconventional and tight oil and tight gas reservoirs. Today approximately sixty percent of all wells drilled in the United States are drilled horizontally and nearly all of them are multiple fractured. Because a horizontal well adds additional cost and complexity to the drilling, completion, and stimulation of the well we need to fully understand anything that affects the cost and complexity. In other words, we need to understand the affects of the principal stresses, both direction and magnitude, on the drilling completion, and stimulation of these wells. However, little work has been done to address and understand the relationship between the principal stresses and the lateral direction. This paper has as its goal to fundamentally address the question, in what direction should I drill my lateral? Do I drill it in the direction of the maximum horizontal stress (longitudinal) or do I drill it in the direction of the minimum horizontal stress (transverse)? The answer to this question relates directly back to the title of this paper and please "Don't let your land man drive that decision." This paper focuses on the horizontal well's lateral direction (longitudinal or transverse fracture orientation) and how that direction influences productivity, reserves, and economics of horizontal wells. Optimization studies using a single phase fully three dimensional numeric simulator including convergent non-Darcy flow were used to highlight the importance of lateral direction as a function of reservoir permeability. These studies, conducted for both oil and gas, are used to identify the point on the permeability continuum where longitudinal wells outperform transverse wells. The simulations compare and contrast the transverse multiple fractured horizontal well to longitudinal wells based on the number of fractures and stages. Further, the effects of lateral length, fracture half-length, and fracture conductivity were investigated to see how these parameters affected the decision over lateral direction in both oil and gas reservoirs. Additionally, how does completion style affect the lateral direction? That is, how does an open hole completion compare to a cased hole completion and should the type of completion affect the decision on in what direction the lateral should be drilled? These simulation results will be used to discuss the various horizontal well completion and stimulation metrics (rate, recovery, and economics) and how the choice of metrics affects the choice of lateral direction. This paper will also show a series of field case studies to illustrate actual field comparisons in both oil and gas reservoirs of longitudinal versus transverse horizontal wells and tie these field examples and results to the numeric simulation study. This work benefits the petroleum industry by: Establishing well performance and economic based criteria as a function of permeability for drilling longitudinal or transverse horizontal wells,Integrating the reservoir objectives and geomechanic limitations into a horizontal well completion and stimulation strategy,Developing well performance and economic objectives for horizontal well direction (transverse versus longitudinal) and highlighting the incremental benefits of various completion and stimulation strategies.

Simultaneous Hydraulic Fracturing Improves Completion Efficiency and Lowers Costs Per Foot

2021 ◽  
Author(s):  
David Russell ◽  
Price Stark ◽  
Sean Owens ◽  
Awais Navaiz ◽  
Russell Lockman
Keyword(s):  
Hydraulic Fracturing ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Asset Returns ◽  
Gas Production ◽  
Well Performance ◽  
Additional Time ◽  
Oil And Gas Production ◽  
Single Well ◽  
Lateral Length

Abstract Reducing well costs in unconventional development while maintaining or improving production continues to be important to the success of operators. Generally, the primary drivers for oil and gas production are treatment fluid volume, proppant mass, and the number of stages or intervals along the well. Increasing these variables typically results in increased costs, causing additional time and complexity to complete these larger designs. Simultaneously completing two wells using the same volumes, rates, and number of stages as for any previous single well, allows for more lateral length or volume completed per day. This paper presents the necessary developments and outcomes of a completion technique utilizing a single hydraulic fracturing spread to simultaneously stimulate two or more horizontal wells. The goal of this technique is to increase operational efficiency, lower completion cost, and reduce the time from permitting a well to production of that well—without negatively impacting the primary drivers of well performance. To date this technique has been successfully performed in both the Bakken and Permian basins in more than 200 wells, proving its success can translate to other unconventional fields and operations. Ultimately, over 200 wells were successfully completed simultaneously, resulting in a 45% increase in completion speed and significant decrease in completion costs, while still maintaining equivalent well performance. This type of simultaneous completion scenario continues to be implemented and improved upon to improve asset returns.

NEW METHOD OF IMPULSIVE ELECTROMAGNETIC LOGGING SOUNDING: MAPPING OF THE BAZHENOVSKAYA FORMATION FROM JURASSIC RESERVOIRS PENETRATED BY INCLINED-HORIZONTAL WELLS

2021 ◽  
pp. 31-39
Author(s):  
M. I. Epov ◽  
◽  
V. N. Glinskikh ◽  
M. N. Nikitenko ◽  
K. V. Sukhorukova ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Numerical Modeling ◽  
Middle Jurassic ◽  
High Sensitivity ◽  
Horizontal Wells ◽  
New Method ◽  
Electromagnetic Sounding ◽  
Bazhenov Formation ◽  
Spatial Locations

The work is devoted to the substantiation of new geophysical technology for mapping the Bazhenovskaya Formation based on an impulsive electromagnetic sounding from wells. Theoretically shown the possibility of its application to study the formation from highly inclined and subhorizontal wells drilled in the Upper and Middle Jurassic formations. Numerical modeling of the signals in realistic geoelectric models of the Bazhenov Formation with real well trajectories is carried out on the example of the East Surgut field. The calculations have established that the determination of spatial locations of the top and bottom of the beds is possible when using different-length sondes. Zones of high sensitivity of the full magnetic field matrix to the boundaries with a sufficient signal level at considerable distance, even with a small sonde length, are determined. It is theoretically established that pulsed sounding of the Bazhenov Formation from the Upper and Middle Jurassic reservoirs is feasible for both mapping the boundaries of the formation and tracing its lateral variability.

Comparison of Fractured-Horizontal-Well Performance in Tight Sand and Shale Reservoirs

2011 ◽  
Vol 14 (02) ◽  
pp. 248-259 ◽  
Author(s):  
E.. Ozkan ◽  
M Brown ◽  
R.. Raghavan ◽  
H.. Kazemi
Keyword(s):  
Hydraulic Fracture ◽  
Horizontal Well ◽  
Flow Model ◽  
Horizontal Wells ◽  
Natural Fracture ◽  
Well Performance ◽  
Fracture Conductivity ◽  
Fractured Horizontal Well ◽  
Shale Reservoirs ◽  
Fractured Horizontal Wells

Summary This paper presents a discussion of fractured-horizontal-well performance in millidarcy permeability (conventional) and micro- to nanodarcy permeability (unconventional) reservoirs. It provides interpretations of the reasons to fracture horizontal wells in both types of formations. The objective of the paper is to highlight the special productivity features of unconventional shale reservoirs. By using a trilinear-flow model, it is shown that the drainage volume of a multiple-fractured horizontal well in a shale reservoir is limited to the inner reservoir between the fractures. Unlike conventional reservoirs, high reservoir permeability and high hydraulic-fracture conductivity may not warrant favorable productivity in shale reservoirs. An efficient way to improve the productivity of ultratight shale formations is to increase the density of natural fractures. High natural-fracture conductivities may not necessarily contribute to productivity either. Decreasing hydraulic-fracture spacing increases the productivity of the well, but the incremental production gain for each additional hydraulic fracture decreases. The trilinear-flow model presented in this work and the information derived from it should help the design and performance prediction of multiple-fractured horizontal wells in shale reservoirs.

Fieldwide Application of Autonomous Inflow Control Valve in Increasing the Field Recovery in One of the Matured Fields in the Sultanate of Oman: Case Study

2021 ◽  
Author(s):  
Salim Buwauqi ◽  
Ali Al Jumah ◽  
Abdulhameed Shabini ◽  
Ameera Harrasi ◽  
Tejas Kalyani ◽  
...  
Keyword(s):  
Control Valve ◽  
Oil Production ◽  
Horizontal Wells ◽  
High Water ◽  
Lessons Learned ◽  
Water Production ◽  
Sultanate Of Oman ◽  
Well Performance ◽  
Reservoir Conditions ◽  
Water Cut

Abstract One of the largest operators in the Sultanate of Oman discovered a clastic reservoir field in 1980 and put it on production in 1985. The field produces viscous oil, ranging from 200 - 2000+ cP at reservoir conditions. Over 75% of the wells drilled are horizontal wells and the field is one of the largest producers in the Sultanate of Oman. The field challenges include strong aquifer, high permeability zones/faults and large fluid mobility contrast have resulted that most of the wells started with very high-water cuts. The current field water cut is over 94%. This paper details operator's meticulous journey in qualification, field trials followed by field-wide implementation and performance evaluation of Autonomous Inflow Control Valve (AICV) technology in reducing water production and increasing oil production significantly. AICV can precisely identify the fluid flowing through it and shutting-off the high water or gas saturated zones autonomously while stimulating oil production from healthy oil-saturated zones. Like other AICDs (Autonomous Inflow Control Device) AICV can differentiate the fluid flowing through it via fluid properties such as viscosity and density at reservoir conditions. However, AICVs performance is superior due to its advanced design based on Hagen-Poiseuille and Bernoulli's principles. This paper describes an AICV completion design workflow involving a multi-disciplinary team as well as some of the field evaluation criteria to evaluate AICV well performance in the existing and in the new wells. The operator has completed several dozens of production wells with AICV technology in the field since 2018-19. Based on the field performance review, it has shown the benefit of accelerating oil production as well as reduction of unwanted water which not only reduces the OPEX of these wells but at the same time enormous positive impact on the environment. Many AICV wells started with just 25-40 % water cut and are still producing with low water cut and higher oil production. Based on the initial field-wide assessment, it is also envisaged that AICV wells will assist in achieving higher field recovery. Also, AICV helped in mitigating the facility constraints of handling produced water which will allow the operator continued to drill in-fill horizontal wells. Finally, the paper also discusses in detail the long-term performance results of some of the wells and their impact on cumulative field recovery as well as lessons learned to further optimise the well performance. The technology has a profound impact on improved sweep efficiency and as well plays an instrumental role in reducing the carbon footprint by reducing the significant water production at the surface. It is concluded that AICV technology has extended the field and wells life and proved to be the most cost-effective field-proven technology for the water shut-off application.

A NEW METHOD OF DECLINE CURVE FORECASTING FOR PROJECT WELLS ON THE BASE OF MACHINE LEARNING ALGORITHMS

2020 ◽  
pp. 69-74
Author(s):  
S.I. Gabitova ◽  
L.A. Davletbakova ◽  
V.Yu. Klimov ◽  
D.V. Shuvaev ◽  
I.Ya. Edelman ◽  
...  
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Horizontal Wells ◽  
Machine Learning Algorithms ◽  
New Method ◽  
Well Completion ◽  
Decline Curve ◽  
Forecasting Method ◽  
Decline Curves

The article describes new decline curves (DC) forecasting method for project wells. The method is based on the integration of manual grouping of DC and machine learning (ML) algorithms appliance. ML allows finding hidden connections between features and the output. Article includes the decline curves analysis of two well completion types: horizontal and slanted wells, which illustrates that horizontal wells are more effective than slanted.

Sign in / Sign up

Export Citation Format

Share Document