Assessment of Thermal Recovery: Steam Assisted Gravity Drainage (SAGD) to Improve Recovery Efficiency in the Heavy-Oil Fields of the Peruvian Jungle

2014 ◽  
Author(s):  
Nestor Antonio Palacios Chun
Keyword(s):  
Heavy Oil ◽  
Thermal Recovery ◽  
Oil Fields ◽  
Gravity Drainage ◽  
Recovery Efficiency ◽  
Steam Assisted Gravity Drainage

Exploration Method for Extra Heavy Oil Reservoir with Top Water

2011 ◽  
Vol 243-249 ◽  
pp. 6237-6240
Author(s):  
You Jun Ji ◽  
Jian Jun Liu ◽  
Nelly Zhang
Keyword(s):  
Heavy Oil ◽  
Volume Fraction ◽  
Thermal Recovery ◽  
Gravity Drainage ◽  
Oil Reservoir ◽  
Steam Assisted Gravity Drainage ◽  
Production Parameters ◽  
Liaohe Oilfield ◽  
Modeling Software ◽  
Heavy Oil Reservoir

For an extra heavy oil reservoir with top water in Liaohe Oilfield, it is inefficiently and hard to produce by conventional thermal recovery. In this regard, the numerical modeling software – CMG is used to analyze the recovery of this reservoir by Steam-Assisted Gravity Drainage (SAGD) and Steam and incondensable gas-assisted gravity push (SAGP). The production indicators, development effects and distribution of field parameters of these two techniques are contrasted and analyzed, and the injection and production parameters for application of SAGP in wells are optimized. The study shows that, for this extra heavy oil reservoir with top water, SAGP is more effective than SAGD, and the former can reduce the steam demand, improve the oil/steam ratio (OSR), prolong the development and enhance the recovery. It is recommended, during application of SAGP on site, to inject nitrogen at volume fraction of 30-40% and when the steam chamber expands to a section with 1/3 net pay thickness away to the top water.

Optimisation of Steam Assisted Gravity Drainage [SAGD] for Improved Recovery from Unconsolidated Heavy Oil Reservoirs

2011 ◽  
Vol 367 ◽  
pp. 403-412 ◽  
Author(s):  
Babs Mufutau Oyeneyin ◽  
Amol Bali ◽  
Ebenezer Adom
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Oil Industry ◽  
Steam Injection ◽  
Thermal Capacity ◽  
Thermal Recovery ◽  
Viscosity Reduction ◽  
Gravity Drainage ◽  
Steam Assisted Gravity Drainage ◽  
The Impact

Most of the heavy oil resources in the world are in sandstone reservoir rocks, the majority of which are unconsolidated sands which presents unique challenges for effective sand management. Because they are viscous and have less mobility, then appropriate recovery mechanisms that lower the viscosity to the point where it can readily flow into the wellbore and to the surface are required. There are many cold and thermal recovery methods assisted by gravity drainage being employed by the oil industry. These are customised for specific reservoir characteristics with associated sand production and management problems. Steam Assisted Gravity Drainage (SAGD) based on horizontal wells and gravity drainage, is becoming very popular in the heavy oil industry as a thermal viscosity reduction technique. SAGD has the potential to generate a heavy oil recovery factor of up to 65% but there are challenges to ‘’realising the limit’’. The process requires elaborate planning and is influenced by a combination of factors. This paper presents unique models being developed to address the issue of multiphase steam-condensed water-heavy oil modelling. It addresses the effects of transient issues such as the changing pore size distribution due to compaction on the bulk and shear viscosities of the non-Newtonian heavy oil and the impact on the reservoir productivity, thermal capacity of the heavy oil, toe-to-heel steam injection rate and quality for horizontal well applications. Specific case studies are presented to illustrate how the models can be used for detailed risk assessment for SAGD design and real-time process optimisation necessary to maximise production at minimum drawdown. Nomenclature

scholarly journals 3D experimental investigation on enhanced oil recovery by flue gas assisted steam assisted gravity drainage

2021 ◽  
pp. 014459872110065
Author(s):  
Lei Tao ◽  
Xiao Yuan ◽  
Sen Huang ◽  
Nannan Liu ◽  
Na Zhang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Flue Gas ◽  
Physical Simulation ◽  
Thermal Recovery ◽  
Production Performance ◽  
Experimental Result ◽  
Gravity Drainage ◽  
Steam Assisted Gravity Drainage

Flue gas assisted steam assisted gravity drainage (SAGD) is a frontier technology to enhance oil recovery for heavy oil reservoirs. The carbon dioxide generated from the thermal recovery of heavy oil can be utilized and consumed to mitigate climate warming for the world. However, most studies are limited to merely use numerical simulation or small physical simulation device and hardly focus on large scale three-dimensions experiment, which cannot fully investigate the enhanced oil recovery (EOR) mechanism of flue gas assisted SAGD, thus the effect of flue gas on SAGD production performance is still not very clear. In this paper, large-scaled and high temperature and pressure resistant 3D physical simulation experiment was conducted, where simulated the real reservoir to a maximum extent, and systematically explored the EOR mechanisms of the flue gas assisted SAGD. Furthermore, the differences between the steam huff and puff, SAGD and flue gas assisted SAGD are discussed. The experimental result showed that the production effect of SAGD was improved by injecting flue gas, with the oil recovery was increased by 5.7%. With the help of thermocouple temperature measuring sensors, changes of temperature field display that flue gas can promote lateral re-development of the steam chamber, and the degree of reservoir exploitation around the horizontal wells has been increased particularly. What’s more, the addition of flue gas further increased the content of light components and decreased the content of heavy by comparing the content of heavy oil components produced in different production times.

Numerical Simulation of Thermal Solvent Replacing Steam under Steam Assisted Gravity Drainage SAGD Process

2010 ◽  
Author(s):  
Weiqiang Li ◽  
Daulat D. Mamora
Keyword(s):  
High Temperature ◽  
Oil Recovery ◽  
Oil Sands ◽  
Steam Injection ◽  
Thermal Recovery ◽  
Production Performance ◽  
Gravity Drainage ◽  
Steam Assisted Gravity Drainage ◽  
Recovery Technique ◽  
Simulation Results

Abstract Steam Assisted Gravity Drainage (SAGD) is one successful thermal recovery technique applied in the Athabasca oil sands in Canada to produce the very viscous bitumen. Water for SAGD is limited in supply and expensive to treat and to generate steam. Consequently, we conducted a study into injecting high-temperature solvent instead of steam to recover Athabasca oil. In this study, hexane (C6) coinjection at condensing condition is simulated using CMG STARS to analyze the drainage mechanism inside the vapor-solvent chamber. The production performance is compared with an equivalent steam injection case based on the same Athabasca reservoir condition. Simulation results show that C6 is vaporized and transported into the vapor-solvent chamber. At the condensing condition, high temperature C6 reduces the viscosity of the bitumen more efficiently than steam and can displace out all the original oil. The oil production rate with C6 injection is about 1.5 to 2 times that of steam injection with oil recovery factor of about 100% oil initially-in-place. Most of the injected C6 can be recycled from the reservoir and from the produced oil, thus significantly reduce the solvent cost. Results of our study indicate that high-temperature solvent injection appears feasible although further technical and economic evaluation of the process is required.

Approximate Physics-Discrete Simulation of the Steam-Chamber Evolution in Steam-Assisted Gravity Drainage

SPE Journal ◽  
2018 ◽  
Vol 24 (02) ◽  
pp. 477-491 ◽  
Author(s):  
Enrique Gallardo ◽  
Clayton V. Deutsch
Keyword(s):  
Oil Sands ◽  
Recovery Process ◽  
Thermal Recovery ◽  
Porous Media Flow ◽  
Gravity Drainage ◽  
Discrete Simulation ◽  
Flow Equations ◽  
Integrity Assessment ◽  
Steam Chamber ◽  
Steam Assisted Gravity Drainage

Summary Steam-assisted gravity drainage (SAGD) is a thermal-recovery process to produce bitumen from oil sands. In this technology, steam injected in the reservoir creates a constantly evolving steam chamber while heated bitumen drains to a production well. Understanding the geometry and the rate of growth of the steam chamber is necessary to manage an economically successful SAGD project. This work introduces an approximate physics-discrete simulator (APDS) to model the steam-chamber evolution. The algorithm is formulated and implemented using graph theory, simplified porous-media flow equations, heat-transfer concepts, and ideas from discrete simulation. The APDS predicts the steam-chamber evolution in heterogeneous reservoirs and is computationally efficient enough to be applied over multiple geostatistical realizations to support decisions in the presence of geological uncertainty. The APDS is expected to be useful for selecting well-pair locations and operational strategies, 4D-seismic integration in SAGD-reservoir characterization, and caprock-integrity assessment.

Feasibility of time-lapse gravity and gravity gradiometry monitoring for steam-assisted gravity drainage reservoirs

Geophysics ◽  
2015 ◽  
Vol 80 (2) ◽  
pp. WA99-WA111 ◽  
Author(s):  
Anya Reitz ◽  
Richard Krahenbuhl ◽  
Yaoguo Li
Keyword(s):  
Heavy Oil ◽  
Production Efficiency ◽  
Low Cost ◽  
Time Lapse ◽  
Gravity Drainage ◽  
Great Success ◽  
Gravity Gradiometry ◽  
Steam Chamber ◽  
Steam Assisted Gravity Drainage ◽  
The Cost

There is presently an increased need to monitor production efficiency as heavy oil reservoirs become more economically viable. We present a feasibility study of monitoring steam-assisted gravity drainage (SAGD) reservoirs using time-lapse gravimetry and gravity gradiometry. Even though time-lapse seismic has historically shown great success for SAGD monitoring, the gravimetry and gravity gradiometry methods offer a low-cost interseismic alternative that can complement the seismic method, increase the survey frequency, and decrease the cost of monitoring. In addition, both gravity-based methods are directly sensitive to the density changes that occur as a result of the replacement of heavy oil by steam. Advances in technologies have made both methods viable candidates for consideration in time-lapse reservoir monitoring, and we have numerically evaluated their potential application in monitoring SAGD production. The results indicate that SAGD production should produce a strong anomaly for both methods at typical SAGD reservoir depths. However, the level of detail for steam-chamber geometries and separations that can be recovered from the gravimetry and gravity gradiometry data is site dependent. Gravity gradiometry shows improved monitoring ability, such as better recovery of nonuniform steam movement due to reservoir heterogeneity, at shallower production reservoirs. Gravimetry has the ability to detect SAGD steam-chamber growth to greater depths than does gravity gradiometry, although with decreasing resolution of the expanding steam chambers.

Sign in / Sign up

Export Citation Format

Share Document