A New Method of Numerical Simulation for Viscoelastic Polymer Flooding

Author(s):  
Z. B. Wang ◽  
Q. Wang ◽  
D. S. Ma ◽  
Y. Z. Ye ◽  
Z. X. Liu
2010 ◽  
Vol 135 ◽  
pp. 149-153 ◽  
Author(s):  
Wen Hui Li ◽  
Sheng Qiang Yang ◽  
Xiu Hong Li

For the precise hole surface, the burr severely affects products’ performance. Considering the specific conditions of the precise hole surface finishing, a new method of two-phase compulsive circulation flows finishing is brought up. Nozzle number, nozzle position, liquid flow, etc. are main factors, which would directly influence finishing effect and efficiency. Affecting rules of main factors are studied by experiments and numerical simulation, which provide basis for thorough research.


Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Jia Zhang ◽  
Shiqing Cheng ◽  
Jie Zhan ◽  
Qi Han

Viscoelastic polymer solution shows shear thinning behavior at low shear rates and shear thickening behavior at high shear rates in reservoirs. However, models that ignored shear thickening behavior were commonly employed to interpret transient pressure data derived from tested wells in viscoelastic polymer flooding systems; although, viscoelastic polymer solutions show shear thickening behavior in the near-wellbore region due to high shear rate. To better characterize the oilfield with pressure transient analysis in viscoelastic polymer flooding systems, we developed a numerical model that takes into account both shear thinning behavior and shear thickening behavior. A finite volume method was employed to discretize partially differential flow equations in a hybrid grid system including PEBI mesh and Cartesian grid, and the Newton-Raphson method was used to solve the fully implicit nonlinear system. To illustrate the significance of our model, we compared our model with a model that ignores the shear thickening behavior by graphing their solutions on log-log plots. In the flow regime of near-wellbore damage, the pressure derivative computed by our model is distinctly larger than that computed by the model ignoring shear thickening behavior. Furthermore, the effect of shear thickening behavior on pressure derivative differs from that of near-wellbore damage. We then investigated the influence of shear thickening behavior on pressure derivative with different polymer injection rates, injection rates, and permeabilities. The results can provide a benchmark to better estimate near-wellbore damage in viscoelastic polymer flooding systems. Besides, we demonstrated the applicability and accuracy of our model by interpreting transient pressure data from a field case in an oilfield with viscoelastic polymer flooding treatments.


2020 ◽  
Author(s):  
Elina Mirsayanova ◽  
Ilnur Ilyasov ◽  
Alexander Cheremisin ◽  
Margarita Evseeva ◽  
Alexey Cheremisin

2018 ◽  
Vol 38 ◽  
pp. 03046
Author(s):  
Chen Yu

In this paper, a new method for the numerical simulation of structural model is proposed,which is employed to analyze the pounding response of caissons subjected to storm surge loads.According to the new method,the simulation process is divided into two steps. Firstly, the wave propagation caused by storm surge is simulated by the wave-generating tool of Flow-3D, and recording the wave force time history on the caisson. Secondly,a refined 3D finite element model of caisson is established,and the wave force load is applied on the caisson according to the measured data in the first step for further analysis of structural pounding response using the explicit solver of LSDYNA. The whole simulation of pounding response of a caisson caused by “Sha Lijia” typhoon is carried out. The results show that the different wave direction results in the different angle caisson collisions, which will lead to different failure mode of caisson, and when the angle of 60 between wave direction and front/back wall is simulated, the numerical pounding failure mode is consistent with the situation.


Author(s):  
Yigon Kim ◽  
◽  
Yang Hee Jung ◽  
Yong Chul Bae

Insulation aging diagnosis provides early warning of electrical equipment defects that helps avoid loss from unexpected production line shutdown. Since relations of insulation aging and partial discharge dynamics are nonlinear, it is very difficult to provide early warning in electrical equipment. This paper suggests a new method for diagnosing insulation aging that measures partial discharge on-line from DAS(Data Acquisition System) and acquires 2D patterns from analyzing it using wavelets. Using this data, design of a neurofuzzy model that diagnoses electrical equipment is investigated. Validity of the new method is confirmed by numerical simulation.


Sign in / Sign up

Export Citation Format

Share Document