Increasing Drilling Performance Using Hydro-Mechanical Hole Cleaning Devices

2013 ◽  
Author(s):  
Luc Van Puymbroeck
Keyword(s):  
Hole Cleaning ◽  
Drilling Performance

Mechanical and Geometrical Tortuosities: Vanishing and Appearing Tortuosities

2021 ◽  
Author(s):  
Robello Samuel ◽  
Jonathan Dale Lightfoot ◽  
William Turner
Keyword(s):  
Flexural Stiffness ◽  
Critical Factors ◽  
Hole Cleaning ◽  
Apparent Change ◽  
Drilling Performance ◽  
Open Hole ◽  
Conventional Methods ◽  
Minimum Curvature

ABSTRACT Tortuosity is one of the critical factors to be considered for complex directional well trajectories, complicated build rates, precise steering in thin reservoirs, and extended reach wells. This paper discusses the pitfalls of estimating tortuosity to quantify borehole quality and answers questions, such as whether the claimed benefits (i.e., enhanced drilling performance, improved hole cleaning, ease of running casing, and superior cement operations) can be fully attributed to reduced borehole tortuosity. Running casing may mask the tortuosity present in the as drilled open hole wellbore section. This vanishing tortuosity alters the apparent "wellbore quality" and the new tortuosity representative of the cased hole path may present new appearing tortuosity. Both vanishing and appearing tortuosity are generally neglected in engineering calculations. Conventional methods to calculate tortuosity are based on the predetermined shape of the trajectory using the minimum curvature method. Wellbore undulation (geometrical tortuosity) is determined using geometrical measurements such as inclination, azimuth, and calculated displacement; however, much of this wellbore undulation vanishes after the casing is run, and thus the cased off wellpath appears smoother. This apparent change in wellbore tortuosity results from the flexural stiffness and rigidity of the casing pipes, and the compression and tension loads along the length of the casing string. Acquiring a subsequent survey along the cased well path yields new inclinations, azimuths, and displacements. This new survey records wellpath undulations resulting from the casings path through the original open hole wellbore geometry and what we call tubular undulation (mechanical tortuosity) which is specific to the path and position of the casing within the wellbore. The smoothing of the wellpath resulting from the casing masking original wellbore tortuosity results in the original geometrical tortuosity vanishing while the new undulations resulting from the mechanical tortuosity of the casing causes additional tortuosity to appear. The comparison between the geometrical and mechanical tortuosity provides a method of quantifying the vanishing and appearing tortuosity.

Continuous Circulation while Drilling: A New Approach to Maintain Hole Cleaning and Improve Drilling Performance in Swamp Drilling Operation

2021 ◽  
Author(s):  
B. K. Yuda
Keyword(s):  
Future Development ◽  
New Technology ◽  
Drill Pipe ◽  
Good Condition ◽  
Circulation System ◽  
Drilling Fluids ◽  
Hole Cleaning ◽  
Drilling Operation ◽  
Drilling Performance ◽  
Safety Incident

Swamp drilling operation in Mahakam has entered the industrialization period in which fast drilling is a common practice. However, fast drilling Rate of Penetration (ROP) causes hole cleaning issues to arise and induce a high Equivalent Circulating Density (ECD) trend. In some wells, this potentially leads to loss problems because of weak formation in shallow sections or depleted formation with relatively low fracture gradient. As a result, drilling parameter reduction was performed that causing lower ROP and additional circulation to reduce ECD. A new technology called Continuous Circulation Device (CCD) can help to tackle the problems mentioned above. It is a sub-based constant circulation system that enables the continuous circulation of drilling fluids downhole while making or breaking drill pipe connections. This system helps to maintain ECD and improve drilling performance as the cuttings are continuously carried out of the hole. This paper is introduced to analyze the benefits of CCD and opportunities for future development in the swamp drilling operation. The device was applied during drilling in the 12-1/4” and 8-1/2” sections. The challenge during drilling in these sections was to improve ROP without inducing bad hole cleaning that could lead to a high ECD trend. The result of CCD utilization shows that ECD during drilling could be reduced up to 2 points and become more stable compared to the previous trend. Since there was a reduction of ECD, the ROP could be improved up to 10%. Furthermore, only 1 cycle for circulation at well TD was performed as the minimum cuttings appeared. Pulling out the string and running the casing string was managed smoothly as the hole was already in a good condition. This utilization has been successfully implemented without any safety incident nor related Non-Productive Time (NPT). This positive result leads us to open the opportunity for future development in swamp fields asset.

The Virtual Well Engineer – A Real – Time Surveillance Tool for Managed Pressure Drilling Operations

2007 ◽  
Vol 18-19 ◽  
pp. 277-285
Author(s):  
Babs Mufutau Oyeneyin ◽  
Phil Burge ◽  
Lisa Hogg ◽  
Chris Anderson
Keyword(s):  
Multiphase Flow ◽  
Complex Environments ◽  
Hole Cleaning ◽  
Functional Capabilities ◽  
Drilling Performance ◽  
Underbalanced Drilling ◽  
Pressure Profiles ◽  
Managed Pressure Drilling ◽  
Engineering Team ◽  
Drilling Operations

Well engineers face ever increasing technical challenge of drilling in complex environments and the use of Managed Pressure Drilling(MPD) techniques to control annular pressure for improved drilling performance in the oil industry has growing interest[1-4]. Understanding hole cleaning and controlling annular pressure in this complex environment is becoming increasingly important for a range of applications. The Virtual Well Engineer[VWE] has been identified as the engineering tool to address these issues in order to deliver a successful MPD operation. The VWE is the product name for a suite of well planning , monitoring and simulation packages with focus on Managed Pressure Drilling includng underbalanced drilling that allows the well engineering team to interact with virtual reality. Recent works initiated by the Well Engineering Group at The Robert Gordon University have extended the knowledge of multiphase flow in a drilling annulus through the tracking of the transient multiphase flow pattern prevailing and effects on hole cleaning , the pressure profiles and identification of hot spots in concentric and eccentric annular sections . The mechanistic models developed at RGU form the core algorithms for the VWE. This paper presents the architecture and functional capabilities of the VWE – HydraulicsDTS™ , which is used in simulating well operations.

Real Time Automation of Cutting Carrying Capacity Index to Predict Hole Cleaning Efficiency and Thereby Improve Well Drilling Performance

2021 ◽  
Author(s):  
Mohammed M Al-Rubaii ◽  
Dhafer Al-Shehri ◽  
Mohamed N Mahmoud ◽  
Saleh M Al-Harbi ◽  
Khaled A Al-Qahtani
Keyword(s):  
Real Time ◽  
Carrying Capacity ◽  
Drilling Fluid ◽  
Model Development ◽  
Cleaning Efficiency ◽  
Time Model ◽  
Well Drilling ◽  
Hole Cleaning ◽  
Drilling Performance ◽  
Drilling Operations

Abstract Hole cleaning efficiency is one of the major factors that affects well drilling performance. Rate of penetration (ROP) is highly dependent on hole cleaning efficiency. Hole cleaning performance can be monitored in real-time in order to make sure drilled cuttings generated are efficiently transported to surface. The objective of this paper to present a real time automated model to obtain hole cleaning efficiency and thus effectively adjust parameters as required to improve drilling performance. The process adopts a modified real time carrying capacity indicator. There are many hole cleaning models, methodologies, chemicals and correlations, but majority of these models do not simulate drilling operations sequences and are not dependent on practicality of drilling operations. The developed real time hole cleaning indicator can ensure continuous monitoring and evaluation of hole cleaning performance during drilling operations. The methodology of real time model development is by selecting offset mechanical drilling parameters and drilling fluid parameters where collected, analyzed, tested and validated to model strong hole cleaning efficiency indicator that can extremely participate and facilitate a position in drilling automations and fourth industry revolution. The automated hole cleaning model is utilizing real time sensors of drilling and validate the strongest relationships among the variables. The study, analysis, test and validation of the relationships will reveal the significant parameters that will contribute massively for model development procedures. The model can be run as well by using the real time sensors readings and their inputs to be fed into the developed automated model. The developed model of real time carrying capacity indicator profile will be shown as function of depth, drilling fluid density, flow rate of mud pump or mud pump output, and other important factors will be illustrated by details. The model has been developed and validated in the field of drilling operations to empower the drilling teams for better and understandable monitoring and evaluation of hole cleaning efficiency while performing drilling operations. The real time model can provide a vision for better control of mud additives and that will contribute to mud cost effectiveness. The automated model of hole cleaning efficiency optimized the rate of penetration (ROP) by 50% in well drilling performance as a noticeable and valuable improvement. This optimum improvement saved cost and time of rig and drilling of wells and contributed to accelerate wells’ delivery. The innovative real time model was developed to optimize drilling and operations efficiency by using the surface rig sensors and interpret the downhole measurements and that can lead innovatively to other important hole cleaning indicators and other tactics for better development of downhole measurements models that can participate for optimized drilling efficiency.

Soft Torque Impact on Drilling Performance in Qatar

2014 ◽  
Author(s):  
F. Attar ◽  
R. Grauwmans ◽  
O. Ikhajiagbe
Keyword(s):  
Drilling Performance

Optimization of Drilling Performance Based on an Intelligent Drilling Advisory System

2019 ◽  
Author(s):  
Mahmoud Abughaban ◽  
Amjad Alshaarawi ◽  
Cui Meng ◽  
Guodong Ji ◽  
Weihong Guo
Keyword(s):  
Advisory System ◽  
Drilling Performance

Bottom Hole Assembly Design Enhancement Successfully Eliminate Hole Problems and Reduce Significant Drilling Time : South S Field Case Study

2020 ◽  
Author(s):  
Y. D. Mulia
Keyword(s):  
Contact Area ◽  
Cost Savings ◽  
Assembly Design ◽  
Drilling Performance ◽  
Bottom Hole ◽  
Unconsolidated Sand ◽  
Bottom Hole Assembly ◽  
Drilling Parameter ◽  
Drilling Time

For S-15 and S-14 wells at South S Field, drilling of the 12-1/4” hole section became the longest tangent hole section interval of both wells. There were several challenges identified where hole problems can occur. The hole problems often occur in the unconsolidated sand layers and porous limestone formation sections of the hole during tripping in/out operations. Most of the hole problems are closely related to the design of the Bottom Hole Assembly (BHA). In many instances, hole problems resulted in significant additional drilling time. As an effort to resolve this issue, a new BHA setup was then designed to enhance the BHA drilling performance and eventually eliminate hole problems while drilling. The basic idea of the enhanced BHA is to provide more annulus clearance and limber BHA. The purpose is to reduce the Equivalent Circulating Density (ECD,) less contact area with formation, and reduce packoff risk while drilling through an unconsolidated section of the rocks. Engineering simulations were conducted to ensure that the enhanced BHA were able to deliver a good drilling performance. As a results, improved drilling performance can be seen on S-14 well which applied the enhanced BHA design. The enhanced BHA was able to drill the 12-1/4” tangent hole section to total depth (TD) with certain drilling parameter. Hole problems were no longer an issue during tripping out/in operation. This improvement led to significant rig time and cost savings of intermediate hole section drilling compared to S-15 well. The new enhanced BHA design has become one of the company’s benchmarks for drilling directional wells in South S Field.

scholarly journals Incremental and acceleration production estimation and their effect on optimization of well infill locations in tight gas reservoirs

2021 ◽  
Author(s):  
Atheer Dheyauldeen ◽  
Omar Al-Fatlawi ◽  
Md Mofazzal Hossain
Keyword(s):  
Transient Flow ◽  
Development Planning ◽  
Main Role ◽  
Gas Reservoirs ◽  
Type Curves ◽  
Field Development ◽  
Drilling Performance ◽  
Well Location ◽  
Infill Drilling ◽  
Tight Formations

AbstractThe main role of infill drilling is either adding incremental reserves to the already existing one by intersecting newly undrained (virgin) regions or accelerating the production from currently depleted areas. Accelerating reserves from increasing drainage in tight formations can be beneficial considering the time value of money and the cost of additional wells. However, the maximum benefit can be realized when infill wells produce mostly incremental recoveries (recoveries from virgin formations). Therefore, the prediction of incremental and accelerated recovery is crucial in field development planning as it helps in the optimization of infill wells with the assurance of long-term economic sustainability of the project. Several approaches are presented in literatures to determine incremental and acceleration recovery and areas for infill drilling. However, the majority of these methods require huge and expensive data; and very time-consuming simulation studies. In this study, two qualitative techniques are proposed for the estimation of incremental and accelerated recovery based upon readily available production data. In the first technique, acceleration and incremental recovery, and thus infill drilling, are predicted from the trend of the cumulative production (Gp) versus square root time function. This approach is more applicable for tight formations considering the long period of transient linear flow. The second technique is based on multi-well Blasingame type curves analysis. This technique appears to best be applied when the production of parent wells reaches the boundary dominated flow (BDF) region before the production start of the successive infill wells. These techniques are important in field development planning as the flow regimes in tight formations change gradually from transient flow (early times) to BDF (late times) as the production continues. Despite different approaches/methods, the field case studies demonstrate that the accurate framework for strategic well planning including prediction of optimum well location is very critical, especially for the realization of the commercial benefit (i.e., increasing and accelerating of reserve or assets) from infilled drilling campaign. Also, the proposed framework and findings of this study provide new insight into infilled drilling campaigns including the importance of better evaluation of infill drilling performance in tight formations, which eventually assist on informed decisions process regarding future development plans.

A novel method for improving drilling performance of CFRP/Ti6AL4V stacked materials

2021 ◽  
Author(s):  
Nafiz Yaşar ◽  
Mehmet Erdi Korkmaz ◽  
Munish Kumar Gupta ◽  
Mehmet Boy ◽  
Mustafa Günay
Keyword(s):  
Drilling Performance ◽  
Novel Method
Sign in / Sign up

Export Citation Format

Share Document