A Comprehensive Application of a Composite Reservoir Model to Pressure Transient Analysis

1987 ◽  
Author(s):  
J. S. Olarewaju ◽  
W. J. Lee
Keyword(s):  
Transient Analysis ◽  
Reservoir Model ◽  
Pressure Transient Analysis ◽  
Pressure Transient

scholarly journals Pressure Transient Analysis for Sandstone Reservoir by Using Saphir

2020 ◽  
pp. 17-24
Author(s):  
Hussein Al- Ali
Keyword(s):  
Flow Regime ◽  
Transient Analysis ◽  
Radial Flow ◽  
Stone Formation ◽  
Cross Flow ◽  
Reservoir Model ◽  
Pressure Transient Analysis ◽  
Pressure Transient ◽  
Flow Regime Transition ◽  
A Value

This work is discussed how to differentiate between two tricky models for sand stone formation by using the pressure transient analysis PTA for three Wells which are distributed in south, middle and north of X field. In the derivative curve these two models have the same sequence of flow regime which are by hump, first radial flow regime, transition hump and then late radial flow regime. The parameter Kappa (K) played the most important key to select the type of reservoir model and differentiate between the two models in PTA. In the middle and south of the field, this parameter has a value close to one at well no. Rt-16 & Rt-18, which means that the system behaves as dual porosity. On the other hand, Kappa has a value of around (0.74) in Rt-17 to represent a double permeability system but without cross flow between two layers due to the small value of Lamda.

Pressure-Transient Analysis of Bottomhole Pressure and Rate Measurements by Use of System-Identification Techniques

SPE Journal ◽  
2015 ◽  
Vol 20 (05) ◽  
pp. 1005-1027 ◽  
Author(s):  
M.. Mansoori ◽  
P. M. Van den Hof ◽  
J.-D.. -D. Jansen ◽  
D.. Rashtchian
Keyword(s):  
System Identification ◽  
Frequency Domain ◽  
Flow Rate ◽  
Transient Analysis ◽  
Closed Loop ◽  
Reservoir Model ◽  
Data Set ◽  
Pressure Transient Analysis ◽  
Pressure Transient ◽  
Piecewise Constant

Summary This study presents a novel perspective on pressure-transient analysis (PTA) of downhole-pressure and flow-rate data by use of system-identification (SI) techniques as widely used in advanced process engineering. Key features of the paper are that it considers the classic PTA process from a system-theoretical perspective; derives the causal structure of the flow dynamics; proposes a method to deal with continuously varying pressure and flow-rate signals contaminated with correlated noise, which estimates physical reservoir parameters through a systematic matching procedure in the frequency domain; and can cope with arbitrary (i.e., not necessarily piecewise constant) flow-rate signals. To this end, the wellbore and the reservoir are modeled as two distinct two-port power-transmitting systems that are bilaterally coupled at their common boundary. This structure reveals that, from an SI perspective, the wellbore dynamics affect the bottomhole data as a feedback mechanism. Because of this feedback structure, it is necessary to use closed-loop SI techniques, and, because of the presence of sensor noise, the reservoir model cannot be identified solely from the bottomhole measurements. Therefore, an auxiliary signal is needed, for which we choose the surface flow rate, although other signals, such as the bottomhole temperature, could potentially also be used. Then a suitable closed-loop SI technique is the so-called two-stage method. The first stage of the algorithm removes the dynamic effects of the wellbore from the noisy data, and the second stage identifies the reservoir model in terms of rational polynomials. Thereafter, the usual physical reservoir parameters (e.g., averaged permeability and skin factor) are obtained through matching the results of the identified reservoir model and those of typical analytical reservoir models in the frequency domain, as an alternative to classic graphical or numerical type-curve analysis. The method does not rely on a piecewise constant approximation of the flow-rate signal, unlike other known PTA methods such as time-domain deconvolution. Six numerical experiments, by use of a synthetic data set, and one field example, by use of data from a real gas well, illustrate the key aspects of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document