Thirty Years of Experience in the Application of Thermal Methods of Heavy Oil Recovery in the Permian-Carboniferous Reservoir of the Usinsk Field

2012 ◽  
Author(s):  
Evgenii N. Taraskin ◽  
Stanislav Ursegov ◽  
Vladimir Muliak ◽  
Mikhail Vasilievich Chertenkov ◽  
Andrey Alabushin
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Years Of Experience ◽  
Heavy Oil Recovery ◽  
Thermal Methods

scholarly journals Electrical Heating for Heavy Oil: Past, Current, and Future Prospect

2020 ◽  
Author(s):  
Muhammad Yudatama Hasibuan ◽  
Shania Regina ◽  
Rizaldi Wahyu ◽  
Daniel Situmorang ◽  
Fadlul Azmi ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Future Prospect ◽  
Electrical Heating ◽  
Heavy Oil Recovery ◽  
Future Prospects ◽  
Oil Viscosity ◽  
Thermal Methods ◽  
Excessive Heat ◽  
The Future

This paper presents a review of the electrical heating method for heavy oil recovery based on past, current, and future prospects of electrical heating. Heavy oil is one of the potential crude oil used as a link to reduce the crisis of light oil used today. The obstacle of heavy oil is a high viscosity and density in which thermal injection is a method for heavy oil recovery, but it results in economic and environmental issues. Electrical heating is one of the thermal methods by transferring heat into the reservoir. The basic process of electrical heating is to increase the mobility of the oil. Because the temperature rises, it can reduce oil viscosity and makes it easier for heavy oil to flow. The past and current developments have been carried out to fill up the gap of electrical heating projects. The future prospects must meet energy efficiency, and the excessive heat will damage formation that must be tackled in the future prospect. the works adopt several electrical heating projects and applications in the world where the works give a brief future prospect of electrical heating.

Downhole Steam Generation for Green Heavy Oil Recovery

2021 ◽  
Author(s):  
Abdulsallam Al-Mashrafi ◽  
Mahmood Fani ◽  
Faisal Asfand ◽  
Mahmood Amani ◽  
Mohsen Assadi ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Steam Injection ◽  
Recent Effort ◽  
Heavy Oil Recovery ◽  
Steam Generation ◽  
Steam Quality ◽  
Thermal Methods ◽  
Feasibility Assessment ◽  
Using Data

Abstract The ultimate target of heavy oil recovery is to enhance oil mobility by transferring steam's thermal energy to the oil phase, incrementing its temperature, and reducing heavy oil's viscosity. While the various types of steam floods such as Cyclic Steam Injection (CSI) and Steam-Assisted Gravity Drainage (SAGD) are widely used worldwide, they have certain limitations that need further improvements. Notably, in surface steam generation systems, downhole steam quality is around 70% which means that 30% of latent heat is lost while steam travels from the surface to the pre-determined downhole location. Downhole steam generation (DHSG) can be a viable alternative for the surface steam injection in which steam will be generated downhole instead of on the surface. The asserted method presents significant benefits such as preventing steam quality loss, decreasing the environmental effects, and enhancing the heavy oil recovery by co-injecting the flue gas products such as CO2, and consequently, the economic outcomes will be increased. In this research, a comprehensive techno-economic case study has been conducted on a heavy oil reservoir to evaluate the economic and technical advantages of DHSG compared to surface steam generation. Various technical expenses and revenues such as investment costs, operating costs, royalties, and taxes have been considered in a simulation model in MATLAB. This DHSG feasibility assessment has been performed using data of a heavy oil reserve currently under steam flood. Results showed that DHSG could increase up to 50% economic and technical interest than conventional steam injection projects. One of the outstanding benefits of DHSG is the reduction of heat loss. Since steam is produced in-situ, either downhole or in the reservoir, no waste of heat occurs. Typically, most heat losses happen on surface lines and wellbore during steam injection from the surface, which accounts for approximately 32%. Thus, this issue is excluded using the DHSG method. The results of the recent effort fit well into the current industry's requirements. DHSG can (1) increase the rate of heavy oil production, (2) decrease the extra expenses, and (3) dwindle the environmental side effects of CO2 emission of surface steam generation. Compared with conventional thermal methods, in DHSG, the steam to oil ratio remains constant with depth change while the desired steam quality can be achieved at any location. The asserted benefits can ultimately optimize the steam injection with a significant reduction in UTC, hence, improved profitability.

Improving Heavy Oil Recovery by Unconventional Thermal Methods

2012 ◽  
Author(s):  
Osamah Ali Alomair ◽  
Mutlaq Abdullah Alarouj ◽  
Abdullah Ahmed Althenayyan ◽  
Anwar Hassan Al Saleh ◽  
Humoud Almohammad ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Heavy Oil Recovery ◽  
Thermal Methods

Potential Of Non-Thermal Methods For Heavy Oil Recovery

1989 ◽  
Vol 28 (04) ◽  
Author(s):  
Rawya Selby ◽  
A.A. Alikhan ◽  
S.M. Farouq Ali
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Heavy Oil Recovery ◽  
Thermal Methods

Prospects for Heavy Oil Recovery and its Role in the Energy Picture

1986 ◽  
Vol 4 (5) ◽  
pp. 321-348
Author(s):  
Rawya Selby ◽  
S. M. Farouq Ali
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Oil Sands ◽  
Thermal Recovery ◽  
Heavy Oil Recovery ◽  
Heavy Oils ◽  
Thermal Methods ◽  
Oil Reserves ◽  
Recovery Processes ◽  
Cyclic Steam Stimulation

Heavy oil and oil sands deposits constitute an important resource, with in-place estimates varying between 600 × 109 and 980 × 109 m3. These deposits are mostly concentrated in Canada, the US and Venezuela. The gradual depletion of conventional oil reserves is leading to a greater interest in heavy oil recovery. This paper presents on overview of heavy oil characteristics, worldwide deposits and recovery methods, with special emphasis on the heavy oils and oil sands of Canada. Thermal recovery techniques such as cyclic steam stimulation, steamflooding and in-situ combustion have been generally more successful than non-thermal methods. The principal thermal recovery processes are discussed in detail. Reservoir characteristics influencing the applicability of these processes are mentioned, and possible operational problems are outlined. Most of the Canadian heavy oils and oil sands deposits occur in the provinces of Alberta and Saskatchewan. Selected recovery projects currently in operation are described, outlining modifications to the basic process, problems encountered and range of success.

scholarly journals Improving heavy oil recovery, part (I): synthesis and surface activity evaluation of some novel organometallic surfactants based on salen–M complexes

RSC Advances ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 1750-1761
Author(s):  
M. M. Abdelhamid ◽  
S. A. Rizk ◽  
M. A. Betiha ◽  
S. M. Desouky ◽  
A. M. Alsabagh
Keyword(s):  
Surface Activity ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Heavy Oil Recovery ◽  
Activity Evaluation ◽  
New Family

This study focuses on preparing a new family of organometallic surfactants based on five ion complexes, namely Co2+, Ni2+, Cu2+, Fe3+, and Mn2+.

Fabrication of a pH-responsive emulsifier for heavy oil recovery based on dynamic imine bond

2021 ◽  
Vol 332 ◽  
pp. 115916
Author(s):  
Tongyu Zhu ◽  
Wanli Kang ◽  
Hongbin Yang ◽  
Zhe Li ◽  
Tongyu Wang ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Heavy Oil Recovery ◽  
Ph Responsive ◽  
Imine Bond
Sign in / Sign up

Export Citation Format

Share Document