Offshore Drilling & Well Testing of a HPHT Gas Well: A Case Study

Author(s):  
Prerak Hitesh Shah ◽  
Harsh Tusharbhai Pandya ◽  
Harsh Sharma ◽  
Arpit Saxena
2019 ◽  
Author(s):  
Mubashir Ahmad Mubashir ◽  
Fawad Zain Yousfi ◽  
Mohamed M. Albadi ◽  
Mohamed A. Baslaib ◽  
Omar Al Jeelani ◽  
...  

Author(s):  
Jianbo Zhang ◽  
Zhiyuan Wang ◽  
Wenqiang Lou ◽  
Wenguang Duan ◽  
Weiqi Fu ◽  
...  

Abstract Hydrate plugging is an important factor affecting the safety and efficiency of flow assurance. Current prevention methods for hydrate plugging are costly or environmentally unfriendly or inefficient. In this work, an efficient method to prevent hydrate plugging during deep-water gas well testing was put forward, which is achieved by reasonably changing the testing orders of different gas production rates. The deposited hydrates in the tubing under low testing rates will be decomposed under high rates to reduce the risk of hydrate plugging without hydrate inhibitor injection. A case study is carried out to investigate the applicability of this method. The results show that the maximum dimensionless thickness of hydrate deposit reaches 68.14% under the conventional testing order, but decreases to 33.59% by using the proposed method. It is indicated that the proposed method can obviously decrease the risk of hydrate plugging without using hydrate inhibitor injection. Hence, the proposed method is a more economical and environmentally friendly method for hydrate plugging prevention, which can be applied as an alternative to the present prevention methods during deep-water gas well testing.


2015 ◽  
Vol 8 (1) ◽  
pp. 149-154 ◽  
Author(s):  
Jun Gu ◽  
Ju Huang ◽  
Su Zhang ◽  
Xinzhong Hu ◽  
Hangxiang Gao ◽  
...  

The purpose of this study is to improve the cementing quality of shale gas well by mud cake solidification, as well as to provide the better annular isolation for its hydraulic fracturing development. Based on the self-established experimental method and API RP 10, the effects of mud cake solidifiers on the shear strength at cement-interlayer interface (SSCFI) were evaluated. After curing for 3, 7, 15 and 30 days, SSCFI was remarkably improved by 629.03%, 222.37%, 241.43% and 273.33%, respectively, compared with the original technology. Moreover, the compatibility among the mud cake solidifier, cement slurry, drilling fluid and prepad fluid meets the safety requirements for cementing operation. An application example in a shale gas well (Yuanye HF-1) was also presented. The high quality ratio of cementing quality is 93.49% of the whole well section, while the unqualified ratio of adjacent well (Yuanba 9) is 84.46%. Moreover, the cementing quality of six gas-bearing reservoirs is high. This paper also discussed the mechanism of mud cake solidification. The reactions among H3AlO42- and H3SiO4- from alkali-dissolved reaction, Na+ and H3SiO4- in the mud cake solidifiers, and Ca2+ and OH- from cement slurry form the natrolite and calcium silicate hydrate (C-S-H) with different silicate-calcium ratio. Based on these, SSCFI and cementing quality were improved.


2001 ◽  
Author(s):  
Albertus Retnanto ◽  
Ben Weimer ◽  
I Nyoman Hari Kontha ◽  
Heru Triongko ◽  
Azriz Azim ◽  
...  

2011 ◽  
Author(s):  
Victor Gerardo Vallejo ◽  
Aciel Olivares ◽  
Pablo Crespo Hdez ◽  
Eduardo R. Roman ◽  
Claudio Rogerio Tigre Maia ◽  
...  

1997 ◽  
Author(s):  
S. Al-Haddad ◽  
M. LeFlore ◽  
T. Lacy

2020 ◽  
Author(s):  
Issatay Dosmukhambetov ◽  
Bakhytzhan Taubayev ◽  
Ualikhan Yesbolov ◽  
Aikhan Sadykov ◽  
Muratbek Shmalin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document