Augmentation of Well Productivity Using Slant and Horizontal Wells

1986 ◽  
Author(s):  
S. D. Joshi
Keyword(s):  
Horizontal Wells ◽  
Well Productivity

Redevelopment of a Matured Multilayered Carbonate Offshore Field Through High Technology Horizontal and Multilateral Wells

2007 ◽  
Vol 10 (05) ◽  
pp. 453-457 ◽  
Author(s):  
Rajesh Kumar ◽  
S. Ramanan ◽  
J.L. Narasimham
Keyword(s):  
New Technologies ◽  
High Technology ◽  
Horizontal Wells ◽  
Development Stage ◽  
Scientific Data ◽  
Carbonate Reservoir ◽  
Western India ◽  
Drilling Fluids ◽  
Well Productivity ◽  
Offshore Field

Summary Oil productivity from Mumbai High field, an offshore multilayered carbonate reservoir, increased significantly through the implementation of a major redevelopment program. Geoscientific information available from approximately 700 exploratory and develop- ment wells drilled in the field during nearly 25 years was incorporated during geological and reservoir simulation modeling of the field. High-technology drilling (viz. horizontal/multilaterals for the new development wells) was adopted on field scale to effectively address typical complexity of the layered carbonate reservoirs. Since the commencement of the project in 2000, approximately 140 new wells were drilled, mostly with horizontal and multilateral drainholes. Besides these, more than 70 suboptimal producers were also converted as horizontal sidetracks under brownfield development. The horizontal sidetracks were drilled as long-drift sidetrack (LDST), extended-reach drilling (ERD), LDST-ERD, short-drift sidetrack (SDST), and medium-radius drainhole (MRDH) types of wells through the application of innovative and emerging drilling technologies with nondamaging drilling fluids, whipstocks to kick off sidetrack wells, rotary-steering systems, and expandable tubulars to complete horizontal sidetracks in lower layers. With the implementation of this project, the declining trend was fully arrested and a significant upward trend in production has been established. Introduction The field redevelopment process requires the intergration of reservoir-development strategies, facility options, and drilling and production philosophies to maximize oil and gas recovery from a matured field. A significant number of case studies are available on mature field revitalization using a multidisciplinary team concept, exhaustive geo-scientific data analysis, and new drilling technologies (Chedid and Colmenares 2002; Clark et al. 2000; Dollens et al. 1999; Kinchen et al. 2001). Advancements in drilling and completion technology have enabled construction of horizontal wells with longer wellbores, more-complex well geometry, and sophisticated completion designs. Horizontal wells provide an effective method to produce bypassed oil from matured fields. In the early 1980s, this technology was in the development stage and was used in limited applications. By the 1990s, the technology had matured, and its acceptance in the industry had increased significantly. Performance of horizontal/multilateral wells, risk assessment of horizontal-well productivity and comparison of horizontal- and vertical-well performance in different fields is available in literature (Babu and Aziz 1989; Brekke and Thompson 1996; Economides et al. 1989; Joshi 1987; Joshi and Ding 1995; Mukherjee and Economides 1991; Norris et al. 1991; Vij et al. 1998). A significant number of horizontal/multilateral development wells were drilled as a part of redevelopment of Mumbai High, a matured multilayered carbonate offshore field in Western India. The details of new technologies applied and performance of these new high-technology wells are presented in this paper. Besides comparison of well productivity of horizontal and conventional sidetrack wells, this paper presents some technical issues faced.

Advanced Well Completion Strategies to Improve Gas Production Deliverability in Marginal Tight Gas Reservoirs from an Onshore Abu Dhabi Gas Field

2021 ◽  
Author(s):  
Hajar Ali Abdulla Al Shehhi ◽  
Bondan Bernadi ◽  
Alia Belal Zuwaid Belal Al Shamsi ◽  
Shamma Jasem Al Hammadi ◽  
Fatima Omar Alawadhi ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Wells ◽  
Gas Production ◽  
Abu Dhabi ◽  
Tight Gas ◽  
Production Rates ◽  
Well Productivity ◽  
Gas Saturation ◽  
Well Design ◽  
The Impact

Abstract Reservoir X is a marginal tight gas condensate reservoir located in Abu Dhabi with permeability of less than 0.05 mD. The field was conventionally developed with a few single horizontal wells, though sharp production decline was observed due to rapid pressure depletion. This study investigates the impact of converting the existing single horizontal wells into single long horizontal, dual laterals, triple laterals, fishbone design and hydraulic fracturing in improving well productivity. The existing wells design modifications were planned using a near reservoir simulator. The study evaluated the impact of length, trajectory, number of laterals and perforation intervals. For Single, dual, and triple lateral wells, additional simulation study with hydraulic fracturing was carried out. To evaluate and obtain effective comparisons, sector models with LGR was built to improve the simulation accuracy in areas near the wellbore. The study conducted a detailed investigation into the impact of various well designs on the well productivity. It was observed that maximizing the reservoir contact and targeting areas with high gas saturation led to significant increase in the well productivity. The simulation results revealed that longer laterals led to higher gas production rates. Dual lateral wells showed improved productivity when compared to single lateral wells. This incremental gain in the production was attributed to increased contact with the reservoir. The triple lateral well design yielded higher productivity compared to single and dual lateral wells. Hydraulic fracturing for single, dual, and triple lateral wells showed significant improvement in the gas production rates and reduced condensate banking near the wellbore. A detailed investigation into the fishbone design was carried out, this involved running sensitivity runs by varying the number of branches. Fishbone design showed considerable increment in production when compared to other well designs This paper demonstrates that increasing the reservoir contact and targeting specific areas of the reservoir with high gas saturation can lead to significant increase in the well productivity. The study also reveals that having longer and multiple laterals in the well leads to higher production rates. Hydraulic fracturing led to higher production gains. Fishbone well design with its multiple branches showed the most production again when compared to other well designs.

scholarly journals Productivity Evaluation for Long Horizontal Well Test in Deep-Water Faulted Sandstone Reservoir

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Zhiwang Yuan ◽  
Li Yang ◽  
Yingchun Zhang ◽  
Rui Duan ◽  
Xu Zhang ◽  
...  
Keyword(s):  
Steady State ◽  
Deep Water ◽  
Horizontal Well ◽  
Evaluation Method ◽  
Horizontal Wells ◽  
Productivity Index ◽  
Test Time ◽  
Well Test ◽  
Well Productivity ◽  
Sandstone Reservoir

For deep-water faulted sandstone reservoirs, the general practice is to design long horizontal wells improving well productivity. During the project implementation stage, well tests are performed on all drilled wells to evaluate well productivity accurately. Furthermore, multisize chokes are often utilized in a shorten test time for loosen formation, high test cost, and high well productivity. Nevertheless, the conventional productivity evaluation approach cannot accurately evaluate the well test productivity and has difficulty in determining the underneath pattern. As a result, the objective of this paper is to determine a productivity evaluation method for multisize chokes long horizontal well test in deep-water faulted sandstone reservoir. This approach introduces a productivity model for long horizontal wells in faulted sandstone reservoir. It also includes the determination of steady-state test time and the productivity evaluation method for multisize chokes. In this paper, the EGINA Oilfield, a deep-water faulted sandstone reservoir, located in West Africa was chosen as the research target. Based on Renard and Dupuy’s steady-state equation, the relationship between the productivity index per meter and the length of horizontal section was derived. Consequently, this relationship is used to determine the productivity pattern for long horizontal wells with the same geological features, which can provide more accurate productivity evaluations for tested wells and forecast the well productivity for untested wells. After implementing this approach on the EGINA Oilfield, the determined relationship is capable to accurately evaluate the test productivity for long horizontal wells in reservoirs with similar characteristics and assist in examination and treatment for horizontal wells with abnormal productivity.

scholarly journals A Modeling Study of the Productivity of Horizontal Wells in Hydrocarbon-Bearing Reservoirs: Effects of Fracturing Interference

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Lei Huang ◽  
Peijia Jiang ◽  
Xuyang Zhao ◽  
Liang Yang ◽  
Jiaying Lin ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Well ◽  
Finite Difference Methods ◽  
Horizontal Wells ◽  
Fracture Initiation ◽  
Design Parameters ◽  
Porous Media Flow ◽  
Propagation Mechanism ◽  
Well Productivity ◽  
Fracturing Process

Commercial production from hydrocarbon-bearing reservoirs with low permeability usually requires the use of horizontal well and hydraulic fracturing for the improvement of the fluid diffusivity in the matrix. The hydraulic fracturing process involves the injection of viscous fluid for fracture initiation and propagation, which alters the poroelastic behaviors in the formation and causes fracturing interference. Previous modeling studies usually focused on the effect of fracturing interference on the multicluster fracture geometry, while the related productivity of horizontal wells is not well studied. This study presents a modeling workflow that utilizes abundant field data including petrophysical, geomechanical, and hydraulic fracturing data. It is used for the quantification of fracturing interference and its correlation with horizontal well productivity. It involves finite element and finite difference methods in the numeralization of the fracture propagation mechanism and porous media flow problems. Planar multistage fractures and their resultant horizontal productivity are quantified through the modeling workflow. Results show that the smaller numbers of clusters per stage, closer stage spacings, and lower fracturing fluid injection rates facilitate even growth of fractures in clusters and stages and reduce fracturing interference. Fracturing modeling results are generally correlated with productivity modeling results, while scenarios with stronger fracturing interference and greater stimulation volume/area can still yield better productivity. This study establishes the quantitative correlation between fracturing interference and horizontal well productivity. It provides insights into the prediction of horizontal well productivity based on fracturing design parameters.

Study on Multilateral well Productivity Prediction Technology

2013 ◽  
Vol 827 ◽  
pp. 232-238
Author(s):  
Xiao Dong Wu ◽  
Rui He Wang ◽  
Yi Ning Wang ◽  
Zhuang Zhang
Keyword(s):  
Horizontal Well ◽  
Physical Simulation ◽  
Horizontal Wells ◽  
Coupling Model ◽  
Laboratory Method ◽  
Well Productivity ◽  
Vertical Well ◽  
Reservoir Flow ◽  
Wellbore Flow ◽  
Productivity Prediction

The production of a multilateral horizontal well is higher than the production of a vertical well, even than that of a unilateral horizontal well. Nonetheless, the stimulation effect is significantly influenced by the branch parameters, and the impacts of branch parameters on the productivity of a multilateral horizontal well are rather complex. In this paper, the factors which affect the productivity of multilateral horizontal wells are preliminarily analyzed with the laboratory method of physical simulation. Then, a semi-analytical coupling model of wellbore flow and reservoir flow is built, and the multilateral horizontal wells are simulated to investigate the impacts of branch parameters on the stimulation effect of multilateral horizontal wells.

scholarly journals Inflow Performance Analysis of a Horizontal Well Coupling Stress Sensitivity and Reservoir Pressure Change in a Fractured-Porous Reservoir

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 1) ◽  
Author(s):  
Mingxian Wang ◽  
Zifei Fan ◽  
Wenqi Zhao ◽  
Ruiqing Ming ◽  
Lun Zhao ◽  
...  
Keyword(s):  
Horizontal Well ◽  
Horizontal Wells ◽  
Pressure Change ◽  
Sensitivity Coefficient ◽  
Stress Sensitivity ◽  
Reservoir Pressure ◽  
Well Productivity ◽  
Damage Rate ◽  
Porous Reservoir ◽  
Inflow Performance

Abstract Stress sensitivity has always been a research hotspot in fractured-porous reservoirs and shows huge impacts on well productivity during the depletion development. Due to the continuous reservoir pressure change, accurate evaluation of stress sensitivity and its influence on well productivity is of great significance to optimize well working system. Taking horizontal well trajectory as the research object, the principal focus of this work is on the analysis of inflow performance for a horizontal well coupling stress sensitivity and reservoir pressure change in a fractured-porous reservoir. Firstly, a relationship between permeability damage rate and stress sensitivity coefficient was established to quantitatively evaluate the influence of reservoir pressure and stress sensitivity on reservoir permeability. Secondly, considering stress sensitivity and reservoir pressure drop, a set of practical productivity equations were derived for a horizontal well in a fractured-porous reservoir by adopting the equivalent seepage resistance method. Finally, the influence of relevant important factors on the inflow performance of horizontal wells was discussed in depth. Results show that a positive correlation exists between stress sensitivity coefficient and maximum permeability damage rate. At the same maximum permeability damage rate, high initial reservoir pressure corresponds to low stress sensitivity coefficient. In general, stress sensitivity coefficient mainly ranges from 0 to 0.2. Reservoir pressure change drastically affects the production dynamic characteristics of horizontal wells, and both the inflow performance curve and the production index curve decline and shrink as reservoir pressure decreases. Stress sensitivity is negatively correlated with horizontal well productivity, and the inflow performance/production index curve bends closer to bottom-hole pressure axis, and an inflection point can be observed with the aggravation of stress sensitivity. In addition, horizontal wellbore length and initial reservoir permeability also show significant effects on the inflow performance and are positively correlated with well productivity. For water cut, it has little effect on the well production when bottom-hole pressure drawdown is low, but its effect gets stronger as the drawdown becomes higher. Meaningfully, depending on these newly established productivity equations, a reasonable production system can be quantitatively optimized and achieved for the horizontal wells in fractured-porous reservoirs.

Optimized Planning and Placement of Horizontal Wells Improved Well Productivity and Controlled Water Cut in Umm Gudair Field, Kuwait

2011 ◽  
Author(s):  
Tapan Kumar Banerjee ◽  
Eman Hadad Eaid Fadli ◽  
Fazal Ahmed ◽  
Nasser Al-Khalifa
Keyword(s):  
Horizontal Wells ◽  
Well Productivity ◽  
Water Cut
Sign in / Sign up

Export Citation Format

Share Document