Solvent Chamber Development in 3D Physical Model Experiments of Solvent Vapour Extraction Processes (SVX) With Various Permeabilities and Solvent Vapour Qualities

2011 ◽  
Author(s):  
Kelvin D. Knorr ◽  
Muhammad Imran
Keyword(s):  
Physical Model ◽  
Model Experiments ◽  
Solvent Vapour ◽  
Extraction Processes ◽  
Vapour Extraction

scholarly journals PHYSICAL MODEL EXPERIMENTS OF ORDU-GIRESUN AIRPORT, TURKEY

2017 ◽  
pp. 16
Author(s):  
Sukru Emrah ARIKAN ◽  
Nurgul GULTEKIN ◽  
Alp Kucukosmanoglu ◽  
Berguzar Ozbahceci ◽  
Mehmet SAG ◽  
...  
Keyword(s):  
Physical Model ◽  
Cross Sections ◽  
Transportation Network ◽  
Design Stage ◽  
Model Experiments ◽  
Model Studies ◽  
Engineering Studies ◽  
Wave Characteristics ◽  
Hydraulics Laboratory ◽  
Structural Aspects

Ordu-Giresun Airport, which has been constructed recently, being an example of the aviation sector of Turkish transportation network, is a project having marine structural aspects due to the construction at the sea by filling and in this workout physical model experiments of the project are evaluated. 3000-meters-long runway and the other superstructures of the airport, the first example of construction of such a structure by filling in the sea in Turkey, is to be protected by a breakwater of 7435 meters long. ‘First Cross Section’ has been prepared by using experimental formulas and artificial neural network and ‘Second Cross Section’, being the alternative of the first one has been planned. Yet, both cross sections have similar characteristics, they have berm heights in such a manner that ‘First Cross Section’ enables the structure to be constructed from the sea, whereas ‘Second Cross Section’ makes it possible from the land. Both cross sections are aimed to be evaluated in terms of stability, wave overtopping and economy through the hydraulic model studies performed at the Hydraulics Laboratory of Turkish Ministry of Transportation, Maritime Affairs and Communication. Starting from design stage (computation of design wave characteristics, physical model experiment under different wave conditions on different structure alternatives) to construction stage the engineering studies is presented with comparisons and discussions.

Physical model experiments for shallow failure in rainfall-triggered loess slope, Northwest China

2018 ◽  
Vol 78 (6) ◽  
pp. 4363-4382 ◽  
Author(s):  
Ping Sun ◽  
Gang Wang ◽  
L. Z. Wu ◽  
Ogbonnaya Igwe ◽  
Enzhen Zhu
Keyword(s):  
Physical Model ◽  
Northwest China ◽  
Model Experiments ◽  
Loess Slope ◽  
Shallow Failure

A CASE STUDY ON STABILISER FIN-HULL INTERACTION USING CFD AND MODEL EXPERIMENTS

2021 ◽  
Vol 157 (A4) ◽  
Author(s):  
K A Bhosale ◽  
J T Duffy
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Physical Model ◽  
Free Stream ◽  
Angle Of Attack ◽  
Model Experiments ◽  
Stream Condition ◽  
Hull Forms ◽  
Lift And Drag

A case study was conducted to investigate and quantify stabiliser fin-hull interaction using a combination of Computational Fluid Dynamics and physical model experiments. The fin-hull interaction was studied by comparing the lift and drag of a stabiliser fin in a free stream condition and when attached to a hull. The findings of this case study showed that using free stream fin characteristics to predict performance of a stabiliser fin fitted to the hull resulted in an over-prediction of drag by up to 46% and under-prediction of lift by up to 75% for the speeds and angle of attack analysed. These discrepancies are for this case study only and in practice will vary for different hull forms, fin types, fin location and angles of attack. However, the research highlights the limitations of using free stream fin characteristics to predict the performance of a fin fitted to a hull.

Sign in / Sign up

Export Citation Format

Share Document