A Unique Methodology To Estimate Fracture Permeability in Naturally Fractured Reservoirs (NFR)

2010 ◽  
Author(s):  
Shahzad Ulhaq ◽  
Fereydoun Salehi
Keyword(s):  
Fractured Reservoirs ◽  
Naturally Fractured Reservoirs ◽  
Fracture Permeability ◽  
Naturally Fractured

Approximate Analytical-Pressure Studies on Dual-Porosity Reservoirs With Stress-Sensitive Permeability

2015 ◽  
Vol 18 (04) ◽  
pp. 523-533 ◽  
Author(s):  
Shuhua Wang ◽  
Mingxu Ma ◽  
Wei Ding ◽  
Menglu Lin ◽  
Shengnan Chen
Keyword(s):  
Production Rate ◽  
Flow Rate ◽  
Fractured Reservoirs ◽  
Naturally Fractured Reservoirs ◽  
Dual Porosity ◽  
Fracture Permeability ◽  
Permeability Model ◽  
Pressure Behavior ◽  
Naturally Fractured ◽  
Permeability Modulus

Summary Pressure-transient analysis in dual-porosity media is commonly studied by assuming a constant reservoir permeability. Such an assumption can result in significant errors when estimating pressure behavior and production rate of naturally fractured reservoirs as fracture permeability decreases during the production. At present, there is still a lack of analytical pressure-transient studies in naturally fractured reservoirs while taking stress-sensitive fracture permeability into account. In this study, an approximate analytical model is proposed to investigate the pressure behavior and production rate in the naturally fractured reservoirs. This model assumes that fracture permeability is a function of both permeability modulus and pressure difference. The pressure-dependent fracture system is coupled with matrix system with an unsteady-state exchange flow rate. A nonlinear diffusivity equation in fracture system is developed and solved by Pedrosa's transformation and a perturbation technique with zero-order approximation. A total of six solutions in the Laplace space are presented for two inner-boundary conditions and three outer-boundary conditions. Finally, pressure behavior and production rate are studied for both infinite and finite reservoirs. Pressure behavior and production rate from the models with and without stress-sensitive permeability are compared. It is found that, for an infinite reservoir with a constant-flow-rate boundary condition, if permeability modulus is 0.1, dimensionless pressure difference at the well bottom from the model with fracture-permeability sensitivity is 80% higher than that of the constant fracture-permeability model at a dimensionless time of 106. Such difference can be as high as 216% if permeability modulus increases to 0.15. On the contrary, for the infinite reservoirs with a constant-pressure boundary, the constant fracture-permeability model tends to overestimate the flow rate at wellbore and cumulative production. The proposed model not only provides an analytical and quantitative method to investigate the effects of fracture-permeability sensitivity on reservoir-pressure distribution and production, but it also can be applied to build up analysis of well test data from stress-sensitive formations.

scholarly journals Predictive Modelling of Naturally Fractured Reservoirs Using Geomechanics and Flow Simulation

GeoArabia ◽  
2001 ◽  
Vol 6 (1) ◽  
pp. 27-42
Author(s):  
Stephen J. Bourne ◽  
Lex Rijkels ◽  
Ben J. Stephenson ◽  
Emanuel J.M. Willemse
Keyword(s):  
Fractured Reservoirs ◽  
Flow Simulation ◽  
Naturally Fractured Reservoirs ◽  
Natural Fracture ◽  
Production Data ◽  
Well Test ◽  
Fracture Networks ◽  
Field Scale ◽  
Fracture Permeability ◽  
Naturally Fractured

ABSTRACT To optimise recovery in naturally fractured reservoirs, the field-scale distribution of fracture properties must be understood and quantified. We present a method to systematically predict the spatial distribution of natural fractures related to faulting and their effect on flow simulations. This approach yields field-scale models for the geometry and permeability of connected fracture networks. These are calibrated by geological, well test and field production data to constrain the distributions of fractures within the inter-well space. First, we calculate the stress distribution at the time of fracturing using the present-day structural reservoir geometry. This calculation is based on a geomechanical model of rock deformation that represents faults as frictionless surfaces within an isotropic homogeneous linear elastic medium. Second, the calculated stress field is used to govern the simulated growth of fracture networks. Finally, the fractures are upscaled dynamically by simulating flow through the discrete fracture network per grid block, enabling field-scale multi-phase reservoir simulation. Uncertainties associated with these predictions are considerably reduced as the model is constrained and validated by seismic, borehole, well test and production data. This approach is able to predict physically and geologically realistic fracture networks. Its successful application to outcrops and reservoirs demonstrates that there is a high degree of predictability in the properties of natural fracture networks. In cases of limited data, field-wide heterogeneity in fracture permeability can be modelled without the need for field-wide well coverage.

Block Size and Fracture Permeability in Naturally Fractured Reservoirs

2002 ◽  
Author(s):  
Santiago Rivas-Gomez ◽  
Juana Cruz-Hernandez ◽  
Jose A. Gonzalez-Guevara ◽  
Armando Pineda-Munoz
Keyword(s):  
Fractured Reservoirs ◽  
Block Size ◽  
Naturally Fractured Reservoirs ◽  
Fracture Permeability ◽  
Naturally Fractured
Sign in / Sign up

Export Citation Format

Share Document