Live Fiber-Optic Telemetry Downhole Measurements on Coiled-Tubing-Enabled High-Efficiency Sand Cleanout in a Subhydrostatic Well for the First Time in the Gulf of Mexico

2011 ◽  
Author(s):  
Alexander Rudnik ◽  
Carlos Foinquinos ◽  
Kenneth E. James
Keyword(s):  
Gulf Of Mexico ◽  
High Efficiency ◽  
Fiber Optic ◽  
Coiled Tubing ◽  
Downhole Measurements ◽  
First Time

First Time Live Descaling Operation in Saudi using Coiled Tubing Fiber Optic Real-Time Telemetry Rugged Tool, Foamed Fluid and Pressure Fluid Management System

2016 ◽  
Author(s):  
Mauricio A. Espinosa G ◽  
Jairo A. Leal ◽  
Saad M. Driweesh ◽  
Mustafa F. Buali ◽  
Waleed K. Khnaifir ◽  
...  
Keyword(s):  
Real Time ◽  
Management System ◽  
Fiber Optic ◽  
Fluid Management ◽  
Coiled Tubing ◽  
First Time

Skin Monitoring And Well Testing Utilizing Fiber Optic Telemetry Enabled Coiled Tubing- First time in the world.

2011 ◽  
Author(s):  
Tarek Shaheen ◽  
Mohamed Fattah ◽  
Lambert Dilling ◽  
Sayed Abd El Rahman ◽  
E. Anwar ◽  
...  
Keyword(s):  
Fiber Optic ◽  
Well Testing ◽  
Coiled Tubing ◽  
The World ◽  
First Time

Imaging and diffraction modes in Scanning Transmission Electron Microscopy

1986 ◽  
Vol 44 ◽  
pp. 684-687
Author(s):  
J. M. Cowley ◽  
R. Glaisher ◽  
J. A. Lin ◽  
H.-J. Ou
Keyword(s):  
Scanning Transmission Electron Microscopy ◽  
High Efficiency ◽  
Fiber Optic ◽  
Image Intensifier ◽  
Detector System ◽  
Detector Plane ◽  
Secondary Electrons ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Special Detector

Some of the most important applications of STEM depend on the variety of imaging and diffraction made possible by the versatility of the detector system and the serial nature, of the image acquisition. A special detector system, previously described, has been added to our STEM instrument to allow us to take full advantage of this versatility. In this, the diffraction pattern in the detector plane may be formed on either of two phosphor screens, one with P47 (very fast) phosphor and the other with P20 (high efficiency) phosphor. The light from the phosphor is conveyed through a fiber-optic rod to an image intensifier and TV system and may be photographed, recorded on videotape, or stored digitally on a frame store. The P47 screen has a hole through it to allow electrons to enter a Gatan EELS spectrometer. Recently a modified SEM detector has been added so that high resolution (10Å) imaging with secondary electrons may be used in conjunction with other modes.

High-efficiency ternary polymer solar cells with optimized morphology of active layers enabled by few-layered β-InSe nanosheets

Nanoscale ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 6871-6883
Author(s):  
Jianming Wang ◽  
Huangzhong Yu ◽  
Chunli Hou
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Polymer Solar Cells ◽  
Active Layers ◽  
Ternary Polymer ◽  
First Time

Herein, few-layered β-InSe nanosheets are introduced into the active layers of polymer solar cells as morphological modifiers for the first time. 

scholarly journals High-Efficiency Polarizer Reflectarray Antennas for Data Transmission Links from a CubeSat

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1802
Author(s):  
Eduardo Martinez-de-Rioja ◽  
Daniel Martinez-de-Rioja ◽  
Rafael López-Sáez ◽  
Ignacio Linares ◽  
Jose A. Encinar
Keyword(s):  
Circular Polarization ◽  
Data Transmission ◽  
High Efficiency ◽  
High Gain ◽  
Dual Band ◽  
Left Handed ◽  
Linearly Polarized ◽  
Flat Profile ◽  
First Time ◽  
Collimated Beam

This paper presents two designs of high-efficiency polarizer reflectarray antennas able to generate a collimated beam in dual-circular polarization using a linearly polarized feed, with application to high-gain antennas for data transmission links from a Cubesat. First, an 18 cm × 18 cm polarizer reflectarray operating in the 17.2–22.7 GHz band has been designed, fabricated, and tested. The measurements of the prototype show an aperture efficiency of 52.7% for right-handed circular polarization (RHCP) and 57.3% for left-handed circular polarization (LHCP), both values higher than those previously reported in related works. Then, a dual-band polarizer reflectarray is presented for the first time, which operates in dual-CP in the frequency bands of 20 GHz and 30 GHz. The proposed antenna technology enables a reduction of the complexity and cost of the feed chain to operate in dual-CP, as a linear-to-circular polarizer is no longer required. This property, combined with the lightweight, flat profile and low fabrication cost of printed reflectarrays, makes the proposed antennas good candidates for Cubesat applications.

CO2 hydrogenation into CH4 over Ni–Fe catalysts

2018 ◽  
Vol 11 (03) ◽  
pp. 1850057 ◽  
Author(s):  
Reza Meshkini Far ◽  
Olena V. Ischenko ◽  
Alla G. Dyachenko ◽  
Oleksandr Bieda ◽  
Snezhana V. Gaidai ◽  
...  
Keyword(s):  
Low Temperature ◽  
Synergistic Effect ◽  
Atmospheric Pressure ◽  
High Efficiency ◽  
Co2 Hydrogenation ◽  
Hydrogenation Catalysts ◽  
Fe Catalysts ◽  
First Time ◽  
Supported Ni ◽  
Hydrogenation Of Co

Here, we report, for the first time, on the catalytic hydrogenation of CO2 to methane at atmospheric pressure. For the preparation of hydrogenation catalysts based on Ni and Fe metals, a convenient method is developed. According to this method, low-temperature reduction of the co-precipitated Ni and Fe oxides with hydrogen gives the effective and selective bimetallic Ni[Formula: see text]Fe[Formula: see text], Ni[Formula: see text]Fe[Formula: see text] and Ni[Formula: see text]Fe[Formula: see text] catalysts. At the temperature range of 300–400[Formula: see text]C, they exhibit a high efficiency of CH4 production with respect to monometallic Ni and Fe catalysts. The results imply a synergistic effect between Ni and Fe which caused the superior activity of the Ni[Formula: see text]Fe[Formula: see text] catalyst conversing [Formula: see text]% of CO2 into CH4 at 350[Formula: see text]C. To adapt the Ni–Fe catalysts in the industry, the effect of two different carriers on the efficiency of the alumina-supported Ni[Formula: see text]Fe[Formula: see text] catalyst was investigated. It is found that the Ni[Formula: see text]Fe[Formula: see text]/[Formula: see text]-Al2O3 catalyst effectively conversed CO2 giving 100% methane yield already at 275[Formula: see text]C.

scholarly journals LMI-Based Stability Criterion of Impulsive T-S Fuzzy Dynamic Equations via Fixed Point Theory

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Ruofeng Rao ◽  
Zhilin Pu
Keyword(s):  
Fixed Point ◽  
Stability Criterion ◽  
High Efficiency ◽  
Fixed Point Theory ◽  
Point Theory ◽  
Linear Matrix ◽  
The Matrix ◽  
Matrix Exponential Function ◽  
Takagi Sugeno ◽  
First Time

By formulating a contraction mapping and the matrix exponential function, the authors apply linear matrix inequality (LMI) technique to investigate and obtain the LMI-based stability criterion of a class of time-delay Takagi-Sugeno (T-S) fuzzy differential equations. To the best of our knowledge, it is the first time to obtain the LMI-based stability criterion derived by a fixed point theory. It is worth mentioning that LMI methods have high efficiency and other advantages in largescale engineering calculations. And the feasibility of LMI-based stability criterion can efficiently be computed and confirmed by computer Matlab LMI toolbox. At the end of this paper, a numerical example is presented to illustrate the effectiveness of the proposed methods.

Sign in / Sign up

Export Citation Format

Share Document