Fast Semianalytical Layered Geomechanical Model Applied to a Parametric Study of Hydraulic Fracture Reorientation in a Water-Flooded Field

2010 ◽  
Author(s):  
Maxim Andreevich Chertov ◽  
Eduard Siebrits ◽  
Kreso Kurt Butula
Keyword(s):  
Hydraulic Fracture ◽  
Parametric Study ◽  
Geomechanical Model ◽  
Flooded Field

Development of a new approach for hydraulic fracturing in tight sand with pre-existing natural fractures

2016 ◽  
Vol 56 (1) ◽  
pp. 225 ◽  
Author(s):  
Kunakorn Pokalai ◽  
David Kulikowski ◽  
Raymond L. Johnson ◽  
Manouchehr Haghighi ◽  
Dennis Cooke
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
High Stress ◽  
Gas Production ◽  
Natural Fracture ◽  
Rock Properties ◽  
Fracture Plane ◽  
Natural Fractures ◽  
Geomechanical Model ◽  
Well Design

Hydraulic fracturing in tight gas reservoirs has been performed in the Cooper Basin for decades in reservoirs containing high stress and pre-existing natural fractures, especially near faults. The hydraulic fracture is affected by factors such as tortuosity, high entry pressures, and the rock fabric including natural fractures. These factors cause fracture plane rotation and complexities, leading to fracture disconnection or reduced proppant placement during the treatment. In this paper, rock properties are estimated for a targeted formation using well logs to create a geomechanical model. Natural fracture and stress azimuths within the interval were interpreted from borehole image logs. The image log interpretations inferred that fissures are oriented 30–60° relative to the maximum horizontal stress. Next, diagnostic fracture injection test (DFIT) data was used with the poro-elastic stress equations to predict tectonic strains. Finally, the geomechanical model was history-matched with a planar 3D hydraulic fracturing simulator, and gave more insight into fracture propagation in an environment of pre-existing natural fractures. The natural fracture azimuths and calibrated geomechanical model are input into a framework to evaluate varying scenarios that might result based on a vertical or inclined well design. A well design is proposed based on the natural fracture orientation relative to the hydraulic fracture that minimises complexity to optimise proppant placement. In addition, further models and diagnostics are proposed to aid predicting the hydraulically induced fracture geometry, its impact on gas production, and optimising wellbore trajectory to positively interact with pre-existing natural fractures.

Parametric Study of Photovoltaic Thermal Solar Collector Using An Improved Parallel Flow

2020 ◽  
Vol 2 (1) ◽  
pp. 19-24
Author(s):  
Sakhr Mohammed Sultan ◽  
Chih Ping Tso ◽  
Ervina Efzan Mohd Noor ◽  
Fadhel Mustafa Ibrahim ◽  
Saqaff Ahmed Alkaff
Keyword(s):  
Thermal Conductivity ◽  
Energy Balance ◽  
Parametric Study ◽  
Solar Collector ◽  
Parallel Flow ◽  
Operating Conditions ◽  
Balance Equations ◽  
Conductivity Type ◽  
Pv Module ◽  
Sunny Weather

Photovoltaic Thermal Solar Collector (PVT) is a hybrid technology used to produce electricity and heat simultaneously. Current enhancements in PVT are to increase the electrical and thermal efficiencies. Many PVT factors such as type of absorber, thermal conductivity, type of PV module and operating conditions are important parameters that can control the PVT performance. In this paper, an analytical model, using energy balance equations, is studied for PVT with an improved parallel flow absorber. The performance is calculated for a typical sunny weather in Malaysia. It was found that the maximum electrical and thermal efficiencies are 12.9 % and 62.6 %, respectively. The maximum outlet water temperature is 59 oC.

Sign in / Sign up

Export Citation Format

Share Document