Simulation of a Complex Fluvial-Deltaic Reservoir to identify Opportunities to Improve Oil Recovery in a Mature Oil Field: A Case History (Russian)

2010 ◽  
Author(s):  
Marisely Urdaneta ◽  
Franklyn Javier Angel ◽  
Yamal Eduardo Askoul ◽  
John Erick Guevara ◽  
Edgar R. Gonzalez Orozco
Keyword(s):  
Oil Recovery ◽  
Case History ◽  
Oil Field

Simulation of a Complex Fluvial-Deltaic Reservoir to identify Opportunities to Improve Oil Recovery in a Mature Oil Field: A Case History

2010 ◽  
Author(s):  
Marisely Urdaneta ◽  
Franklyn Javier Angel ◽  
Edgar R. Gonzalez Orozco ◽  
Yamal Eduardo Askoul ◽  
John Erick Guevara
Keyword(s):  
Oil Recovery ◽  
Case History ◽  
Oil Field

scholarly journals Development of an analytical model to predict oil reservoirs performance using mechanical waves propagation

2021 ◽  
Author(s):  
Hesham A. Abu Zaid ◽  
◽  
Sherif A. Akl ◽  
Mahmoud Abu El Ela ◽  
Ahmed El-Banbi ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Field Measurements ◽  
Field Trials ◽  
Oil Field ◽  
Reservoir Properties ◽  
Actual Performance ◽  
Reservoir Performance ◽  
Mechanical Waves ◽  
Incremental Oil Recovery ◽  
Wave Induced

The mechanical waves have been used as an unconventional enhanced oil recovery technique. It has been tested in many laboratory experiments as well as several field trials. This paper presents a robust forecasting model that can be used as an effective tool to predict the reservoir performance while applying seismic EOR technique. This model is developed by extending the wave induced fluid flow theory to account for the change in the reservoir characteristics as a result of wave application. A MATLAB program was developed based on the modified theory. The wave’s intensity, pressure, and energy dissipation spatial distributions are calculated. The portion of energy converted into thermal energy in the reservoir is assessed. The changes in reservoir properties due to temperature and pressure changes are considered. The incremental oil recovery and reduction in water production as a result of wave application are then calculated. The developed model was validated against actual performance of Liaohe oil field. The model results show that the wave application increases oil production from 33 to 47 ton/day and decreases water-oil ratio from 68 to 48%, which is close to the field measurements. A parametric analysis is performed to identify the important parameters that affect reservoir performance under seismic EOR. In addition, the study determines the optimum ranges of reservoir properties where this technique is most beneficial.

Laboratory studies of oil-washing characteristics of surfactants in the pore space of reservoir rocks

2021 ◽  
pp. 86-98
Author(s):  
V. Yu. Ogoreltsev ◽  
S. A. Leontiev ◽  
A. S. Drozdov
Keyword(s):  
Oil Recovery ◽  
Pore Space ◽  
Oil Field ◽  
Oil Fields ◽  
Molecular Surface ◽  
Laboratory Studies ◽  
Reservoir Rocks ◽  
Technological Efficiency ◽  
Chemical Eor ◽  
Physical And Chemical

When developing hard-to-recover reserves of oil fields, methods of enhanced oil recovery, used from chemical ones, are massively used. To establish the actual oil-washing characteristics of surfactant grades accepted for testing in the pore space of oil-containing reservoir rocks, a set of laboratory studies was carried out, including the study of molecular-surface properties upon contact of oil from the BS10 formation of the West Surgutskoye field and model water types with the addition of surfactants of various concentrations, as well as filtration tests of surfactant technology compositions on core models of the VK1 reservoir of the Rogozhnikovskoye oil field. On the basis of the performed laboratory studies of rocks, it has been established that conducting pilot operations with the use of Neonol RHP-20 will lead to higher technological efficiency than from the currently used at the company's fields in the compositions of the technologies of physical and chemical EOR Neonol BS-1 and proposed for application of Neftenol VKS, Aldinol-50 and Betanol.

Experimental Design and Evaluation of Surfactant Polymer for a Heavy Oil Field in South of Sultanate of Oman

2021 ◽  
Author(s):  
Ali Reham Al-Jabri ◽  
Rouhollah Farajzadeh ◽  
Abdullah Alkindi ◽  
Rifaat Al-Mjeni ◽  
David Rousseau ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
History Matching ◽  
Oil Field ◽  
Reservoir Rock ◽  
Sultanate Of Oman ◽  
Industrial Chemicals ◽  
Oil Viscosity ◽  
Injection Strategy ◽  
Operational Conditions

Abstract Heavy oil reservoirs remain challenging for surfactant-based EOR. In particular, selecting fine-tuned and cost effective chemical formulations requires extensive laboratory work and a solid methodology. This paper reports a laboratory feasibility study, aiming at designing a surfactant-polymer pilot for a heavy oil field with an oil viscosity of ~500cP in the South of Sultanate of Oman, where polymer flooding has already been successfully trialed. A major driver was to design a simple chemical EOR method, to minimize the risk of operational issues (e.g. scaling) and ensure smooth logistics on the field. To that end, a dedicated alkaline-free and solvent-free surfactant polymer (SP) formulation has been designed, with its sole three components, polymer, surfactant and co-surfactant, being readily available industrial chemicals. This part of the work has been reported in a previous paper. A comprehensive set of oil recovery coreflood tests has then been carried out with two objectives: validate the intrinsic performances of the SP formulation in terms of residual oil mobilization and establish an optimal injection strategy to maximize oil recovery with minimal surfactant dosage. The 10 coreflood tests performed involved: Bentheimer sandstone, for baseline assessments on large plugs with minimized experimental uncertainties; homogeneous artificial sand and clays granular packs built to have representative mineralogical composition, for tuning of the injection parameters; native reservoir rock plugs, unstacked in order to avoid any bias, to validate the injection strategy in fully representative conditions. All surfactant injections were performed after long polymer injections, to mimic the operational conditions in the field. Under injection of "infinite" slugs of the SP formulation, all tests have led to tertiary recoveries of more than 88% of the remaining oil after waterflood with final oil saturations of less than 5%. When short slugs of SP formulation were injected, tertiary recoveries were larger than 70% ROIP with final oil saturations less than 10%. The final optimized test on a reservoir rock plug, which was selected after an extensive review of the petrophysical and mineralogical properties of the available reservoir cores, led to a tertiary recovery of 90% ROIP with a final oil saturation of 2%, after injection of 0.35 PV of SP formulation at 6 g/L total surfactant concentration, with surfactant losses of 0.14 mg-surfactant/g(rock). Further optimization will allow accelerating oil bank arrival and reducing the large PV of chase polymer needed to mobilize the liberated oil. An additional part of the work consisted in generating the parameters needed for reservoir scale simulation. This required dedicated laboratory assays and history matching simulations of which the results are presented and discussed. These outcomes validate, at lab scale, the feasibility of a surfactant polymer process for the heavy oil field investigated. As there has been no published field test of SP injection in heavy oil, this work may also open the way to a new range of field applications.

From Biomedical to Oil Industry: Promising Mesoporous Materials for Oil Field Applications

2021 ◽  
Author(s):  
Ahmed Wasel Alsmaeil ◽  
Mohamed Amen Hammami ◽  
Amr Ismail Abdel-Fattah ◽  
Mazin Yousef Kanj ◽  
Emmanuel P Giannelis
Keyword(s):  
Mesoporous Silica ◽  
Interfacial Tension ◽  
Mesoporous Materials ◽  
Oil Recovery ◽  
Oil And Gas ◽  
Mesoporous Silica Nanoparticles ◽  
Exchange Process ◽  
Oil Field ◽  
Stimuli Responsive ◽  
High Salinity Water

Abstract Developing nanocarriers deliver molecules to targeted locations has received widespread attention in different fields ranging from biomedical to oil and gas industries. Mesoporous Silica Nanoparticles (MSNs), where the pore size diameter ranges from 2-50 nm, have become attractive in many fields including biomedicine. One advantage is the ability to control the size, morphology of the particles, and the internal and external surfaces properties which enable encapsulating molecules of different size and charges. Moreover, it is possible to functionalize the pores and the surface of the MSNs, which make them suitable to host different molecules and release them in situ in a controlled manner. Despite the numerous studies of MSNs, little has been devoted to subsurface applications. This review will highlight some of the interesting characteristics of MSNs that make them promising carriers of molecules for slow and/or stimuli-responsive delivery for oil field applications. For example, they could be utilized for the controlled release of surfactants for enhanced oil recovery applications to minimize surfactant losses near the well-bore area. The mesoporous materials can be designed to harvest the ions normally present in oil field water, and the high temperatures encountered when travelling deep in the reservoir to release the surfactant. The ion exchange process makes it possible to engineer the MSNs to release their cargo for efficient and stimuli responsive delivery applications. The ion-responsive release was analyzed by the interfacial tension behavior between crude oil and high salinity water (HSW). It is concluded that the interfacial tension could be reduced up to 0.0045 mN/m when the mesoporous silica particles are suspended in HSW in comparison to 0.9 mN/m when suspended in DI water.

The Use of Tracer Technologies for Well Monitoring with Multi-Stage Hydraulic Fracturing on Bolshetirskoye Oil Field

2021 ◽  
Author(s):  
Ivan Krasnov ◽  
Oleg Butorin ◽  
Igor Sabanchin ◽  
Vasiliy Kim ◽  
Sergey Zimin ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
Hydraulic Fracture ◽  
Horizontal Wells ◽  
Pilot Project ◽  
Oil Field ◽  
Well Completion ◽  
Construction Design ◽  
Multi Stage ◽  
Urgent Task

Abstract With the development of drilling and well completion technologies, multi-staged hydraulic fracturing (MSF) in horizontal wells has established itself as one of the most effective methods for stimulating production in fields with low permeability properties. In Eastern Siberia, this technology is at the pilot project stage. For example, at the Bolshetirskoye field, these works are being carried out to enhance the productivity of horizontal wells by increasing the connectivity of productive layers in a low- and medium- permeable porous-cavernous reservoir. However, different challenges like high permeability heterogeneity and the presence of H2S corrosive gases setting a bar higher for the requirement of the well construction design and well monitoring to achieve the maximum oil recovery factor. At the same time, well and reservoir surveillance of different parameters, which may impact on the efficiency of multi-stage hydraulic fracturing and oil contribution from each hydraulic fracture, remains a challenging and urgent task today. This article discusses the experience of using tracer technology for well monitoring with multi-stage hydraulic fracturing to obtain information on the productivity of each hydraulic fracture separately.

The Current Condition of Novo-Elhovskoe Oil Field Production and Actions on Increase of Residual Oil Recovery Efficiency

2003 ◽  
Author(s):  
Yu.A. Kotenev ◽  
A.V. Chibisov ◽  
A.G. Nugaibekov ◽  
R. A. Nugaibekov ◽  
O.V. Kaptelinin
Keyword(s):  
Oil Recovery ◽  
Oil Field ◽  
Recovery Efficiency ◽  
Residual Oil ◽  
Field Production
Sign in / Sign up

Export Citation Format

Share Document