A Guideline to Optimize Drilling Fluids for Coalbed Methane Reservoirs

Author(s):  
Kristin Lee Barr
2008 ◽  
Vol 23 (03) ◽  
pp. 250-257 ◽  
Author(s):  
Leonard V. Baltoiu ◽  
Brent K. Warren ◽  
Thanos A. Natros

2006 ◽  
Author(s):  
Leonard V. Baltoiu ◽  
Brent K. Warren ◽  
Thanos Natros

2012 ◽  
Vol 455-456 ◽  
pp. 1317-1323
Author(s):  
Li Hui Zheng ◽  
Ming Wei Zhang ◽  
Yong Lin

With extremely complicated geological conditions, there is abundant coalbed methane in the China's Ordos Basin Area. As a result of coexistence of different pressure systems in the same one naked well section, there are so many problems taking place occasionally during the drilling process, such as the formation lost circulation and collapse, which require the drilling fluid with a perfect rheology behavior and inhibitive to improve the well-bore containment. The coalbed methane well completions are diverse, usually including vertical well, horizontal well, multi-branch well, and other different well types. So the drilling fluid must have cuttings carried effectively and protect formation damaged to ensure that the process of drilling is security and smooth. Lots of drilling methods are used in the coalbed methane drilling, besides normal nearly balanced drilling, the under balance drilling fluids such as the air, fog, foam, etc particularly improved. All this drilling fluids require itself working compatibility with other fluids in the hole. Therefore, the special state-funded science and technology project has developed a novel bionic Fuzzy-Ball drilling fluid to meet the coalbed methane. Without additional equipments, this novel drilling fluids can be made, with non-solid phase and low density, 0.8~1.0 g/cm3. The inert solids can also be used to adjust the property to more than 1.0g/cm3, matching the near/under-balanced drilling. The formation well-bore containment can effectively improve to meet to the more than 1000 meters coalbed methane drilling in the open or low pressure formation, To portable cuttings effectively under low rate, the ratio of yield point and plastic viscosity can be adjusted to 1.0Pa/mPa•s or more. Combined with the air drilling, this novel Fuzzy-Ball material could not be converted to fluid to solve the formation water production, cavings, completion and other operations. 10 wells application of using the Fuzzy-Ball drilling fluid to complete the coal bed methane wells overcoming water production, collapse, lost circulation and air drilling etc, taking five branches well FL-H2-L, "U" horizontal well DFS-02-H2, water production and collapse well J35, air drilling CLY22 for examples, are introduced to indicate the bionic Fuzzy-Ball fluid application on the coalbed methane drilling spot.


2017 ◽  
Vol 1 (1) ◽  
pp. 1-8 ◽  
Author(s):  
Kathryn Bills Walsh

This case presents the stakeholder conflicts that emerge during the development and subsequent reclamation of abandoned natural gas wells in Wyoming where split estate, or the separation of surface land and mineral rights from one another, occurs. From 1998 to 2008, the Powder River Basin of northeastern Wyoming experienced an energy boom as a result of technological innovation that enabled the extraction of coalbed methane (CBM). The boom resulted in over 16,000 wells being drilled in this 20,000 square-mile region in a single decade. As of May 2017, 4,149 natural gas wells now sit orphaned in Wyoming as a result of industry bankruptcy and abandonment. The current orphaned wells crisis was partially enabled by the patchwork of surface and mineral ownership in Wyoming that is a result of a legal condition referred to as split estate. As the CBM boom unfolded in this landscape and then began to wane, challenges emerged most notably surrounding stalled reclamation activities. This case illuminates these challenges highlighting two instances when split estate contributed to issues between landowners and industry operators which escalated to litigation.


2014 ◽  
Vol 59 (2) ◽  
pp. 509-516
Author(s):  
Andrzej Olajossy

Abstract Methane sorption capacity is of significance in the issues of coalbed methane (CBM) and depends on various parameters, including mainly, on rank of coal and the maceral content in coals. However, in some of the World coals basins the influences of those parameters on methane sorption capacity is various and sometimes complicated. Usually the rank of coal is expressed by its vitrinite reflectance Ro. Moreover, in coals for which there is a high correlation between vitrinite reflectance and volatile matter Vdaf the rank of coal may also be represented by Vdaf. The influence of the rank of coal on methane sorption capacity for Polish coals is not well understood, hence the examination in the presented paper was undertaken. For the purpose of analysis there were chosen fourteen samples of hard coal originating from the Upper Silesian Basin and Lower Silesian Basin. The scope of the sorption capacity is: 15-42 cm3/g and the scope of vitrinite reflectance: 0,6-2,2%. Majority of those coals were of low rank, high volatile matter (HV), some were of middle rank, middle volatile matter (MV) and among them there was a small number of high rank, low volatile matter (LV) coals. The analysis was conducted on the basis of available from the literature results of research of petrographic composition and methane sorption isotherms. Some of those samples were in the form (shape) of grains and others - as cut out plates of coal. The high pressure isotherms previously obtained in the cited studies were analyzed here for the purpose of establishing their sorption capacity on the basis of Langmuire equation. As a result of this paper, it turned out that for low rank, HV coals the Langmuire volume VL slightly decreases with the increase of rank, reaching its minimum for the middle rank (MV) coal and then increases with the rise of the rank (LV). From the graphic illustrations presented with respect to this relation follows the similarity to the Indian coals and partially to the Australian coals.


Sign in / Sign up

Export Citation Format

Share Document