Optimizing Gas Field Performance to Increase Gas Production Rates and Reserves

2009 ◽  
Author(s):  
Michael H. Stein ◽  
Gilberto J. Venturini ◽  
S.M. Avasthi
Keyword(s):  
Field Performance ◽  
Gas Production ◽  
Production Rates ◽  
Gas Field

Optimizing Tubing and Liner Completion Design to Improve Gas Production from Existing Wells: Case Study for ADNOC Onshore Field Abu Dhabi, UAE

2021 ◽  
Author(s):  
Magdy Farouk Fathalla ◽  
Mariam Ahmed Al Hosani ◽  
Ihab Nabil Mohamed ◽  
Ahmed Mohamed Al Bairaq ◽  
Djamal Kherroubi ◽  
...  
Keyword(s):  
Gas Production ◽  
Base Case ◽  
Gas Wells ◽  
Production Rates ◽  
Liquid Loading ◽  
Gas Field ◽  
Well Production ◽  
Well Completion ◽  
The Impact

Abstract An onshore gas field contains several gas wells which have low–intermittent production rates. The poor production has been attributed to liquid loading issue in the wellbore. This study will investigate the impact of optimizing the tubing and liner completion design to improve the gas production rates from the wells. Numerous sensitivity runs are carried out with varying tubing and liner dimensions, to identity optimal downhole completions design. The study begins by identifying weak wells having severe gas production problems. Once the weak wells have been identified, wellbore schematics for those wells are studied. Simulation runs are performed with the current downhole completion design and this will be used as the base case. Several completion designs are considered to minimize the effect of liquid loading in the wells; these include reducing the tubing diameter but keeping the existing liner diameter the same, keeping the original tubing diameter the same but only reducing the liner diameter, extending the tubing to the Total Depth (TD) while keeping the original tubing diameter, and extending a reduced diameter tubing string to the TD. The primary cause of the liquid loading seems to be the reduced velocity of the incoming gas from the reservoir as it flows through the wellbore. A simulation study was performed using the various completion designs to optimize the well completion and achieve higher gas velocities in the weak wells. The results of the study showed significant improvement in gas production rates when the tubing diameter and liner diameter were reduced, providing further evidence that increased velocity of the incoming fluids due to restricted flow led to less liquid loading. The paper demonstrates the impact of downhole completion design on the productivity of the gas wells. The study shows that revisiting the existing completion designs and optimizing them using commercial simulators can lead to significant improvement in well production rates. It is also noted that restricting the flow near the sand face increases the velocity of the incoming fluid and reduces liquid loading in the wells.

Natural fractures in tight gas sandstones: a case study of the Upper Triassic Xujiahe Formation in Xinchang gas field, Western Sichuan Basin, China

2021 ◽  
pp. 1-18
Author(s):  
Yunzhao Zhang ◽  
Lianbo Zeng ◽  
Wenya Lyu ◽  
Dongsheng Sun ◽  
Shuangquan Chen ◽  
...  
Keyword(s):  
Production Capacity ◽  
Gas Production ◽  
Upper Triassic ◽  
Tight Gas ◽  
Natural Fractures ◽  
Carbon And Oxygen Isotopes ◽  
Gas Field ◽  
Xujiahe Formation ◽  
Western Sichuan ◽  
Tight Gas Reservoir

Abstract The Upper Triassic Xujiahe Formation is a typical tight gas reservoir in which natural fractures determine the migration, accumulation and production capacity of tight gas. In this study, we focused on the influences of natural fractures on the tight gas migration and production. We clarified characteristics and attributes (i.e. dips, apertures, filling degree and cross-cutting relationships) of the fractures based on image logging interpretations and core descriptions. Previous studies of electron spin resonance, carbon and oxygen isotopes, homogenization temperature of fluid inclusions analysis and basin simulation were considered. This study also analysed the fracture sequences, source of fracture fillings, diagenetic sequences and tight gas enrichment stages. We obtained insight into the relationship between fracture evolution and hydrocarbon charging, particularly the effect of the apertures and intensity of natural fractures on tight gas production. We reveal that the bedding fractures are short horizontal migration channels of tight gas. The tectonic fractures with middle, high and nearly vertical angles are beneficial to tight gas vertical migration. The apertures of fractures are controlled by the direction of maximum principal stress and fracture angle. The initial gas production of the vertical wells presents a positive correlation with the fracture abundance, and the intensity and aperture of fractures are the fundamental factors that determine the tight gas production. With these findings, this study is expected to guide the future exploration and development of tight gas with similar geological backgrounds.

scholarly journals Evaluation of natural gas production optimization in Kailashtila gas field in Bangladesh using decline curve analysis method

2015 ◽  
Vol 50 (1) ◽  
pp. 29-38 ◽  
Author(s):  
MS Shah ◽  
HMZ Hossain
Keyword(s):  
Production System ◽  
Gas Production ◽  
Curve Analysis ◽  
Production Optimization ◽  
Reservoir Pressure ◽  
Gas Field ◽  
Wellhead Pressure ◽  
Decline Curve Analysis ◽  
Decline Curve ◽  
Overall Performance

Decline curve analysis of well no KTL-04 from the Kailashtila gas field in northeastern Bangladesh has been examined to identify their natural gas production optimization. KTL-04 is one of the major gas producing well of Kailashtila gas field which producing 16.00 mmscfd. Conventional gas production methods depend on enormous computational efforts since production systems from reservoir to a gathering point. The overall performance of a gas production system is determined by flow rate which is involved with system or wellbore components, reservoir pressure, separator pressure and wellhead pressure. Nodal analysis technique is used to performed gas production optimization of the overall performance of the production system. F.A.S.T. Virtu Well™ analysis suggested that declining reservoir pressure 3346.8, 3299.5, 3285.6 and 3269.3 psi(a) while signifying wellhead pressure with no changing of tubing diameter and skin factor thus daily gas production capacity is optimized to 19.637, 24.198, 25.469, and 26.922 mmscfd, respectively.Bangladesh J. Sci. Ind. Res. 50(1), 29-38, 2015

A Dynamic Workflow of Well Health Issue Prediction – Sulfur Deposition

2021 ◽  
Author(s):  
Bashirul Haq
Keyword(s):  
Material Balance ◽  
Gas Production ◽  
Health Issue ◽  
Sulfur Deposition ◽  
Gas Reservoirs ◽  
Gas Field ◽  
Actual Performance ◽  
Sulphur Deposition ◽  
Balance Analysis ◽  
Sour Gas

Abstract Sour gas reservoirs are vital sources for natural gas production. Sulphur deposition in the reservoir reduces a considerable amount of gas production due to permeability reduction. Consequently, well health monitoring and early prediction of Sulphur deposition are crucial for effective gas production from a sour gas reservoir. Dynamic gas material balance analysis is a useful technique in calculating gas initially in place utilizing the flowing wellhead or bottom hole pressures and rates during the well's lifetime. The approach did not apply to monitor a producing gas's health well and detect Sulphur deposition. This work aims to (i) modify dynamic gas material balance equation by adding the Sulphur deposition term, (ii) build a model to predict and validate the issue utilizing the modified equation. A unique form of the flowing material balance is developed by including Sulphur residue term. The curve fitting tool and modified flowing gas material balance are applied to predict well-expected behaviour. The variation between expected and actual performance indicates the health issue of a well. Initial, individual components of the model are tested. Then the model is validated with the known values. The workflow is applied to active gas field and correctly detected the health issue. The novel workflow can accurately predict Sulphur evidence. Besides,the workflow can notify the production engineers to take corrective measures about the subject. Keywords: Sulfur deposition, Dynamic gas material balance analysis, Workflow

scholarly journals Drill core from seismically active sandstone gas reservoir yields clues to internal deformation mechanisms

Geology ◽  
2020 ◽  
Author(s):  
Berend A. Verberne ◽  
Suzanne J.T. Hangx ◽  
Ronald P.J. Pijnenburg ◽  
Maartje F. Hamers ◽  
Martyn R. Drury ◽  
...  
Keyword(s):  
Microstructural Analysis ◽  
Gas Production ◽  
Drill Core ◽  
Gas Reservoir ◽  
Gas Field ◽  
Reservoir Compaction ◽  
Key Factor ◽  
Forecasting System ◽  
Internal Deformation ◽  
Dauphiné Twinning

Europe’s largest gas field, the Groningen field (the Netherlands), is widely known for induced subsidence and seismicity caused by gas pressure depletion and associated compaction of the sandstone reservoir. Whether compaction is elastic or partly inelastic, as implied by recent experiments, is a key factor in forecasting system behavior and seismic hazard. We sought evidence for inelastic deformation through comparative microstructural analysis of unique drill core recovered from the seismogenic center of the field in 2015, 50 yr after gas production started, versus core recovered before production (1965). Quartz grain fracturing, crack healing, and stress-induced Dauphiné twinning are equally developed in the 2015 and 1965 cores, with the only measurable effect of gas production being enhanced microcracking of sparse K-feldspar grains in the 2015 core. Interpreting these grains as strain markers, we suggest that reservoir compaction involves elastic strain plus inelastic compression of weak clay films within grain contacts.

scholarly journals Research on Gas-liquid Mixed Transportation Technological Adaptability: A Case Study of the Western Sichuan Gas Field

2017 ◽  
Vol 10 (1) ◽  
pp. 37-47
Author(s):  
Qingsha Zhou ◽  
Kun Huang ◽  
Yongchun Zhou
Keyword(s):  
Flow Simulation ◽  
Field Tests ◽  
Economic Benefits ◽  
Gas Production ◽  
Simulation Software ◽  
Rapid Decline ◽  
Gas Field ◽  
Western Sichuan ◽  
Field Development ◽  
Well Production

Background: The western Sichuan gas field belongs to the low-permeability, tight gas reservoirs, which are characterized by rapid decline in initial production of single-well production, short periods of stable production, and long periods of late-stage, low-pressure, low-yield production. Objective: It is necessary to continue pursuing the optimization of transportation processes. Method: This paper describes research on mixed transportation based on simplified measurements with liquid-based technology and the simulation of multiphase processes using the PIPEPHASE multiphase flow simulation software to determine boundary values for the liquid carrying process. Conclusion: The simulation produced several different recommendations for the production and maximum multiphase distance along with difference in elevation. Field tests were then conducted to determine the suitability of mixed transportation in western Sichuan, so as to ensure smooth progress with fluid metering, optimize the gathering process in order to achieve stable and efficient gas production, and improve the economic benefits of gas field development.

scholarly journals Fluid pressure arrival-time tomography: Estimation and assessment in the presence of inequality constraints with an application to production at the Krechba field, Algeria

Geophysics ◽  
2010 ◽  
Vol 75 (6) ◽  
pp. O39-O55 ◽  
Author(s):  
Alessio Rucci ◽  
D. W. Vasco ◽  
Fabrizio Novali
Keyword(s):  
Surface Deformation ◽  
Transient Flow ◽  
Fluid Pressure ◽  
Inequality Constraints ◽  
Gas Production ◽  
Gas Field ◽  
Peak Displacement ◽  
Geomechanical Properties ◽  
Fluid Production ◽  
Using Data

Deformation in the overburden proves useful in deducing spatial and temporal changes in the volume of a producing reservoir. Based on these changes, we have estimated diffusive traveltimes associated with the transient flow due to production, and then, as the solution of a linear inverse problem, the effective permeability of the reservoir. An advantage of the approach based on traveltimes, as opposed to one based on the amplitude of surface deformation, is that it is much less sensitive to the exact geomechanical properties of the reservoir and overburden. Inequalities constrain the inversion, under the assumption that the fluid production only results in pore volume decreases within the reservoir. The formulation has been applied to satellite-based estimates of deformation in the material overlying a thin gas production zone at the Krechba field in Algeria. The peak displacement after three years of gas production is found to be approximately [Formula: see text], overlying the eastern margin of the anticlinal structure defining the gas field. Using data from 15 irregularly spaced images of range change, we have calculated the diffusive traveltimes associated with the startup of a gas production well. The inequality constraints were incorporated into the estimates of model parameter resolution and covariance, improving the resolution by roughly 30% to 40%.

Comprehensive Analysis of Production Loggings in Fuling Shale Gas Play in China

2021 ◽  
Author(s):  
Yaowen Liu ◽  
Wei Pang ◽  
Jincai Shen ◽  
Ying Mi
Keyword(s):  
Shale Gas ◽  
Mineral Content ◽  
Horizontal Wells ◽  
Organic Content ◽  
Gas Production ◽  
Liquid Loading ◽  
Comprehensive Overview ◽  
Gas Field ◽  
Well Trajectory ◽  
Positive Effect

Abstract Fuling shale gas field is one of the most successful shale gas play in China. Production logging is one of the vital technologies to evaluate the shale gas contribution in different stages and different clusters. Production logging has been conducted in over 40 wells and most of the operations are successful and good results have been observed. Some previous studies have unveiled one or several wells production logging results in Fuling shale gas play. But production logging results show huge difference between different wells. In order to get better understanding of the results, a comprehensive overview is carried out. The effect of lithology layers, TOC (total organic content), porosity, brittle mineral content, well trajectory is analyzed. Results show that the production logging result is consistent with the geology understanding, and fractures in the favorable layers make more gas contribution. Rate contribution shows positive correlation with TOC, the higher the TOC, the greater the rate contribution per stage. For wells with higher TOC, the rate contribution difference per stage is relatively smaller, but for wells with lower TOC, it shows huge rate contribution variation, fracture stages with TOC lower than 2% contribute very little, and there exist one or several dominant fractures which contributes most gas rate. Porosity and brittle minerals also show positive effect on rate contribution. The gas rate contribution per fracture stage increases with the increase of porosity and brittle minerals. The gas contribution of the front half lateral and that of latter half lateral are relatively close for the "upward" or horizontal wells. However, for the "downward" wells, the latter half lateral contribute much more gas than the front half lateral. It is believed that the liquid loading in the toe parts reduced the gas contribution in the front half lateral. The overview research is important to get a compressive understanding of production logging and different fractures’ contribution in shale gas production. It is also useful to guide the design of horizontal laterals and fractures scenarios design.

Sign in / Sign up

Export Citation Format

Share Document