Assessment of Dynamic Filtration Formation Damage for Alaskan North Slope Drilling Fluids

2008 ◽  
Author(s):  
Prasad B. Kerkar ◽  
Shirish Liladhar Patil ◽  
Godwin Amajuoyi Chukwu ◽  
Abhijit Yeshwant Dandekar ◽  
Santanu Khataniar
Keyword(s):  
North Slope ◽  
Formation Damage ◽  
Drilling Fluids ◽  
Dynamic Filtration ◽  
Alaskan North Slope

Low-Damage Drilling Fluid Technology Used in Jabung Oilfield, Indonesia

2011 ◽  
Vol 347-353 ◽  
pp. 1627-1632
Author(s):  
Jiao Jiao Geng ◽  
Jie Nian Yan ◽  
Wen Yi Chen ◽  
Chun Yao Peng ◽  
Jing Jie Zuo ◽  
...  
Keyword(s):  
High Pressure ◽  
Filtration Rate ◽  
Drilling Fluid ◽  
Formation Damage ◽  
Rock Surface ◽  
Drilling Fluids ◽  
High Permeability ◽  
Dynamic Filtration ◽  
Film Forming ◽  
Sealing Layer

Formation damage is prone to occur during drilling into the formations with medium/high permeability in Jabung Oilfield, Indonesia. To prevent formation damage and enhance productivity of oil wells, a novel low-damage drilling fluid was developed on the basis of the modification of currently used KCl polymer drilling fluid using a special technology. By virtue of the synergistic effect of ideal packing agents and film-forming agents, a sealing layer with high pressure bearing capability can be formed on the rock surface of borehole, so as to prevent drilling fluids from invading into formations effectively. It is shown from the results of numerous experiments that this drilling fluid has excellent rheological properties, very low filtration rates (API filtration rate<4mL and HTHP filtration rate≤12.5mL), good lubricity, and strongly inhibitive character to shale. Also, it exhibits remarkable effectiveness of formation protection indicated by the returned permeability as high as 88.11% and extremely low dynamic filtration rate lower than 4mL.

The Impact of Nanoparticles Geometry and Particle Size on Formation Damage Induced by Drilling Nano-Fluid during Dynamic Filtration

2016 ◽  
Vol 43 ◽  
pp. 81-97 ◽  
Author(s):  
Mostafa Sedaghatzadeh ◽  
Khalil Shahbazi ◽  
Mohammad Hossein Ghazanfari ◽  
Ghasem Zargar
Keyword(s):  
Particle Size ◽  
Fractal Theory ◽  
Cluster Structure ◽  
Experimental Studies ◽  
Formation Damage ◽  
Drilling Fluids ◽  
Mud Cake ◽  
Dynamic Filtration ◽  
Cake Quality ◽  
The Impact

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. nanobased drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light scattering technique. For this purpose, drilling fluids were circulated at different well inclinations and at a constant differential pressure against a synthetic core. Field emission scanning electronic microscopy images taken from mud cakes confirmed the proposed cluster structures of nanoparticles. The experimental results show that the mud cake quality and degree of damage are functions of produced structure of aggregated particles. Moreover, by increasing the well inclination, the skin factor increases. However, this trend is intensively depended on particle geometry. Real time analysis of pore throat size to particle size ratio during mud circulation shows the tendency of particles to create external/internal filter cake is mainly related to well inclination and particle shape. The results can be used to optimize the size and shape of selected macro/nanoparticles as additives in drilling fluids to reduce formation damage in directional and horizontal wells during drilling operation.

Underbalanced Drilling with Coiled Tubing: A Case Study on the Alaskan North Slope, Which Proves the Benefits of Drilling a Straight Hole

2021 ◽  
Author(s):  
Antoni Miszewski ◽  
Adam Miszewski ◽  
Richard Stevens ◽  
Matteo Gemignani
Keyword(s):  
Relative Effectiveness ◽  
Shallow Depth ◽  
North Slope ◽  
Coiled Tubing ◽  
The North ◽  
North Slope Of Alaska ◽  
Minimum Requirements ◽  
Bottom Hole Assembly ◽  
Alaskan North Slope ◽  
Future Work

Abstract A set of 5 wells were to be drilled with directional Coiled Tubing Drilling (CTD) on the North Slope of Alaska. The particular challenges of these wells were the fact that the desired laterals were targeted to be at least 6000ft long, at a shallow depth. Almost twice the length of laterals that are regularly drilled at deeper depths. The shallow depth meant that 2 of the 5 wells involved a casing exit through 3 casings which had never been attempted before. After drilling, the wells were completed with a slotted liner, run on coiled tubing. This required a very smooth and straight wellbore so that the liner could be run as far as the lateral had been drilled. Various methods were considered to increase lateral reach, including, running an extended reach tool, using friction reducer, increasing the coiled tubing size and using a drilling Bottom Hole Assembly (BHA) that could drill a very straight well path. All of these options were modelled with tubing forces software, and their relative effectiveness was evaluated. The drilling field results easily exceeded the minimum requirements for success. This project demonstrated record breaking lateral lengths, a record length of liner run on coiled tubing in a single run, and a triple casing exit. The data gained from this project can be used to fine-tune the modelling for future work of a similar nature.

Case Study of Identifying and Minimizing Formation Damage in Tight Reservoirs Caused by Drilling Fluids in Abu Dhabi Onshore Operation Using Compatibility Coreflood Studies

2021 ◽  
Author(s):  
Raymond Saragi ◽  
Mohammad Husien ◽  
Dalia Salim Abdullah ◽  
Ryan McLaughlin ◽  
Ian Patey ◽  
...  
Keyword(s):  
Positive Impact ◽  
Abu Dhabi ◽  
Formation Damage ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Hydrocarbon Recovery ◽  
Tight Reservoirs ◽  
Filtrate Loss ◽  
Drilling Muds ◽  
Loss Control

Abstract A study was carried out to examine formation damage mechanisms caused by drilling fluids in tight reservoirs in several onshore oil fields in Abu Dhabi. Three phases of compatibility corefloods were carried out to identify potential to improve hydrocarbon recovery and examine reformulated/alternate drilling muds and treatment fluids. Interpretation was aided by novel Nano-CT quantifications and visualisations. The first phase examined the current drilling muds and showed inconsistent filtrate loss control alongside high levels of permeability alteration. These alterations were caused by retention of drilling mud constituents in the near-wellbore and incomplete clean-up of drilling mud-cakes. Based upon these results, reformulated and alternate drilling muds were examined in Phase 2, and there was a positive impact upon both filtrate loss and permeability, although the Nano-CT quantifications and visualisations showed that drilling mud constituents were still having an impact upon permeability. Candidate treatment fluids were examined in Phase 3, with all having a positive impact and the best performance coming from 15% HCl and an enzyme-based treatment. The interpretative tools showed that these treatments had removed drilling mud-cakes, created wormholes, and bypassed the areas where constituents were retained. The compatibility corefloods on tight reservoir core, alongside high-resolution quantifications and visualisations, therefore identified damaging mechanisms, helped identify potential to improve hydrocarbon recovery, and identify treatment fluid options which could be used in the fields.

scholarly journals Experimental study on thermal, rheological and filtration control characteristics of drilling fluids: effect of nanoadditives

2020 ◽  
Vol 75 ◽  
pp. 36
Author(s):  
Erfan Veisi ◽  
Mastaneh Hajipour ◽  
Ebrahim Biniaz Delijani
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Drilling Fluid ◽  
Formation Damage ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Drill Bit ◽  
Rheological Characteristics ◽  
Cu Nanoparticles ◽  
Water Based

Cooling the drill bit is one of the major functions of drilling fluids, especially in high temperature deep drilling operations. Designing stable drilling fluids with proper thermal properties is a great challenge. Identifying appropriate additives for the drilling fluid can mitigate drill-bit erosion or deformation caused by induced thermal stress. The unique advantages of nanoparticles may enhance thermal characteristics of drilling fluids. The impacts of nanoparticles on the specific heat capacity, thermal conductivity, rheological, and filtration control characteristics of water‐based drilling fluids were experimentally investigated and compared in this study. Al2O3, CuO, and Cu nanoparticles were used to prepare the water-based drilling nanofluid samples with various concentrations, using the two-step method. Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) were utilized to study the nanoparticle samples. The nanofluids stability and particle size distribution were, furthermore, examined using Dynamic Light Scattering (DLS). The experimental results indicated that thermal and rheological characteristics are enhanced in the presence of nanoparticles. The best enhancement in drilling fluid heat capacity and thermal conductivity was obtained as 15.6% and 12%, respectively by adding 0.9 wt% Cu nanoparticles. Furthermore, significant improvement was observed in the rheological characteristics such as the apparent and plastic viscosities, yield point, and gel strength of the drilling nanofluids compared to the base drilling fluid. Addition of nanoparticles resulted in reduced fluid loss and formation damage. The permeability of filter cakes decreased with increasing the nanoparticles concentration, but no significant effect in filter cake thickness was observed. The results reveal that the application of nanoparticles may reduce drill-bit replacement costs by improving the thermal and drilling fluid rheological characteristics and decrease the formation damage due to mud filtrate invasion.

Sign in / Sign up

Export Citation Format

Share Document